Having problems with your Canon PowerShot A75 Digital Camera ?

I have recently had the screen replaced after the images developed a magenta tone and became blurred. Now the camera works fine above water but when mounted in the underwater housing the underwater images revert back to the dark magenta tones and are blured. It is the same regardless of wheterh the camera is set to U/W, auto or video mode.


Answers :

You have a great camera but after repairs, you can't expect it to be 100% functional.
Did you replace the screen by yourself?

Sound that the display was not correctly installed. The difference between 'above the water' and 'underwater' is pressure. I believe the display is having mechanical issues. Perhaps it was installed in the wrong way.
Repair Help & Product Troubleshooting for Canon PowerShot A75 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have recently had the screen replaced after the images developed a magenta tone and became blurred. Now the camera works fine above water but when mounted in the underwater housing the underwater images revert back to the dark magenta tones and are blured. It is the same regardless of wheterh the camera is set to U/W, auto or video mode.


You have a great camera but after repairs, you can't expect it to be 100% functional. Did you replace the screen by yourself?Sound that the display was not correctly installed. The difference between 'above the water' and 'underwa ... Canon PowerShot A75 Digital Camera

Dark Images At some point, the images from the camera became very dark in automatic mode. Previous to that, the images were perfect. I have checked all settings many times and changed back to default settings. Nothing has seemed to work other than to change mode to "P" and set for extra exposure. Thanks.


Even in automatic mode, camera still lets you pick what ISO to use. If ISO-Auto is OFF in camera menus, this can give some dark images. Press and hold ISO button and rotate command dial to give a higher ISO, or turn ISO-Auto on in camera menu with cr ... Nikon D40x Digital Camera

My Canon SI/IS Power Shot digital camera is not able to bring up image on normal operating picture modes. It does however still show stored pictures when I change back to images already stored in camera. In picture mode all I get is a dark screen and lines. What's up?


Definitely sounds like you have a bad CCD. The good news is, this camera is under recall for that exact issue. Canon will repair your camera OR possibly replace it with an S5IS even! Free of charge of course.From Canon website: " ... Digital Cameras

I have a panosonic TZ3 and i can not upload the JPG or video image files to my imac. I have followed all instructions and even when the computer is turned off camera will not mount or activate an untitled folder to the desk top when using the usb connection and turning the computer back on. the mode dial on the camera is set to play back but nothing happens. Would appreciate any advice!


Use a card reader to download your pictures to a folder you create on your desktop. ... Panasonic Lumix DMC-TZ3 Digital Camera

Sanyo Xacti VPC-HD1 The display screen is completely black when in record mode; both for still pictures and video mode - yes the lens cap is off. The camera display will play back images and video previously stored on the memory card, but does not display anything new that I have tried to capture since the problem occured.


... Sanyo Digital Cameras

I was trying to copy some videos from my new Panasonic Lumix FZ28 to my laptop for the first time, using usb mode. I was able to view the videos on the camera & on the laptop & copied a couple of still images, but when I tried to copy one of the quicktime files it said there was an error as it could not read the file. After that I have not been able even to turn off the camera - it seems to have frozen & removing the usb & plugging it back into the pc just says the equipment has malfunctioned. I


Remove the battery and re insert again from the camera... ... Digital Cameras

My olympus stylus tough 6000 keeps reverting to internal memory even when it has a memory card inside it. This is usually not a huge problem because i can pop the battery slot open and then take out the card and put it back in and it will usually fix the problem but i will be scuba diving in the bahamas in mid june and i have an underwater housing for the camera so as you might see popping the battery open at 40 feet below the surface could have some damaging effects to the camera. If you could


This happened with my camera. Try replacing the card, the card itself may be corrupted. It worked for me when I replaced it. ... Digital Cameras

I have a new Panasonic DMC-FZ38 digital camera and I seem to have a problem capturing video footage to a PC. I can record video on the camera and it plays back on the camera quite satisfactorily. However when using the supplied software (Photofun studio 4 HD Edition) to transfer images to the PC it fails to recognise that there are any video images. Only the still pictures are transferred. I have tried using other software also and that also says there are no video images. I cannot find anyt


I recommend downloading quicktime player. This player is made for playing pics and videos from these cameras. ... Digital Cameras

Hi there, I've just bought a DMC FX500 digital camera. In the movie mode when I've recorded say 30-40 secs of footage the remaining time always reverts back to 8m 27secs [using a 4GB card]. This should surely reduce and deduct the the time I have left after the video clip was recorded? Cheers any help welcom, PK


What does the manual say? ... Digital Cameras

RCA AutoShot 200X Digital Zoom Video Camera - the only thing that shows up in the lense looks like a white sheet... it will not show any image, even on the "VCR" mode it will not play back anything. It just shows a kind of bright white. Thank you! Rebecca


... Digital Cameras

When I turn on my camera in camera mode, it says memory full. I go to the middle selection to delete some photos and the camera freezes. It won't go to menu, it won't go back to camera mode or video mode. It just freezes. I can't even turn it off unless I take out the batteries. It is a Concord 4363Z model. I think it has a reset button but I am not sure how to use it. I can't find my manual for this camera. Thanks.


Go online and google search for \015\012\015\012Concord Camera Eye-Q 4363z Digital Camera owner's manual. You should be able to download a copy fro ... Concord Camera Eye-Q 4363z Digital Camera

I've got a tasco trail camera and I'm having trouble with the still shot mode. The video mode works fine, but the still shot mode does not. When I have the camera on still shot mode, it will take a picture and then shut off. The camera won't stay on without me having to turn it back on. Has anyone out there encountered this problem before? Thanks for your help.


... Digital Cameras

My Panasonic DMC-TZ3 in any shooting mode produces the following both on the screen and in a captured image: a blurry, snowy, magenta-tinted (visual noise?) presentation. At one point, it produced several normal images, then returned to the problem. The playback mode produces normal images from sored normal images. I have never dropped the camera or exposed it to high heat or cold. I have 3 batteries and none produce any variance in the bad image. I've tied all settings and reset. Up until the


The problem you have mentioned is definitely a case of image sensor malfunction since the distortions are appearing in the pictures too. Getting the imagesensor replaced is the only way to fix this problem. ... Panasonic Lumix DMC-TZ3 Digital Camera

Hi, I seem to have a problem with my Finepix Z1 digital camera. When I take a shot it seems to work ok, and the initial review image seems fine as well. But when I go back and review the image on the camera, or off the memory card via my computer the image is distorted. The best way I can describe it is as if the image appears that I took a photo off something on the tv, with a series of horizontal lines running across the image. The video capture seems to work fine though. Can you offer any sug


The clue is with the video.\015\012The video function does not use the shutter. Lines on photo's or over exposure is due to the shutter not closing completely over the lens when you take a picture.\015\012It will require cleaning which me ... Fuji FinePix Z1 Digital Camera

My digital camera is not in video mode but when i try to take an image it comes out like a mini video.


It must drive you crazy by the sound of it. It doesn't have to do with the setting or anything like that. If your warranty is still in effect i would take it to the place you bought it and see if they can fix that or replace it even. Cameras shoul ... Casio Exilim Zoom EX-Z700 Digital Camera

Viewing images I can't view images on my camera anymore. How can i fix this. when i press the review button it only show the last image that i took, but not all of the other images. also, when i go to the recording mode....to record videos, it doesnt record, but takes pictures!~thanks for the help!i just hope i dont need a new camera!


Does this camera have a round keypad on the back? if so when you go to look at your pictures push the button up, or ,down, left or right. on my sony I push the round menu pad up while looking at pics and that displays all the pics ... Sony Cyber-Shot DSC-S40 Digital Camera

I have a Sanyo VPC C6EX 6megapixel camcorder which, when switched on, immediately takes a photo in 'camera' mode without any prompting. After that, it will not take a photograph in normal operation. I have moved the switch between REC and PLAY and tried both camera and video modes, but neither will respond when buttons pressed. Switch the camera off, and then back on again, and it still takes a picture automatically without warning....! Indeed, the camera seems to be 'confused'?...even in ME


Check if any of the button on your camera is remaning slightly pressed internally.if it is pressed make it proper .also tap the sides of your camera slightly for two minutes.then ON the camera and check out.\015\012if this does not helps.it the ... Sanyo Digital Cameras

We have a 2005 panasonic mini DV, with 800x, About two years ago we began to have problems playing back the video, the sound was gone and there was blue stripes through the playback video screen, or the screen was a crazy jumble of the image. It seemed to fix it self most of the time, this time however we just have a blue screen and it won't play back our videos on the camera. I fooled around with recording speed but I'm not sure that's the problem. Is our problem something we can fix or sh


Hi,It seems that video head of camcorder got clogged/ dirty so become unable to read signal on minidv tapes.Cleaning of video head will work, buy ... Digital Cameras

I have a 4 year old Canon SD 600 and these days it defaults to video mode even in photo mode. I have tried everything, taking out the battery for a long time and putting it back, but always stays on video mode.. does this mean the camera's life is over?


If you have tried to move the switch on the back between the stillphoto, view and video setting, and it does not change modes, the cameras life is as you put it, over.\015\012 ... Canon PowerShot SD600 Digital Camera

The latch on my canon sd79ois is broken or stuck. It is stuck on video mode and i can't get the latch to move to camera mode. How can i get it back on camera mode and get the latch unstuck?


... Cannon Digital Cameras

My camera will not play back the sound with the image when it is playing back my videos. What is wrong? It makes the initial sounds for set up - but just will not play sound for video. When the video is sent to the computer, the sound is there - so I know it is recording. Thanks!


On the camera, go into the menu and select the setup. That's where you should find the option to turn on/off the video sound during camera playback. ... Digital Cameras

Sony DCR-HC 36E On video recording image appears OK and all seems tp be recording well, display normal. However when playing back the image appears in bands of the currently recorded video with alternate bands of the previously recorded video. Is this a menue feature or has the camera a problem & how do I rectify it?


No its not a menu feature.its a faulty lens just clean the lens.or the battery is old.change the battery. ... Digital Cameras

A85 Dead During a normal session, switching from picture-taking mode to view mode, the lens would not retract and the picture in the view froze with the current image. I could not turn off the camera. After a while, the batteries got very hot, so I removed them. I took out the CF card. Later, I replaced the batteries and the put the card back in. The camera worked very briefly, but the LCD view would not work, displaying flashing lines on a black background. New batteries didn't help. The camera


I read something about the fuse going out...http://www.dcresource.com/forums/archive/index.php/t-18151.html ... Canon PowerShot A85 Digital Camera

I have a JVC-GZ-HD300 Hard Disc Video Camera and when using Everio to back up my videos to the computer all is well and the video quality is sharp--however when I convert with the Everio so as to use them on Windows Movie Maker the conversion leaves the finished video blurred. If I have the wrong compression parameter or format on Everio where do I change it and to what? Video output has been recorded on 16.9 component output: 576i HDMI output: AI Image & video recorded on HDD Video syste


Hi, well from one old fellow to another i would say this, when you convert the Video with the DVR, to the window format, you loose a lot of resolution. \015\012\015\012In actual fact, you would be best to probably leave it in the format you say ... Digital Cameras

Fujifilm A350 When the carmera is on the video mode the screen shows (No image) When it is on the camera mode it works look a video.


Troubleshoot by connecting the video cable from the yellow A/V output port of the camera to the video input port of you TV to see if you get video image on the TV screen. You need to set the switch in your camera to video mode (middle) and PAL or NT ... Fuji FinePix A350 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6430 seconds