Having problems with your Canon PowerShot A75 Digital Camera ?
The display can be seen only menu
\015 Not see the image on screen Aparatu foto.Meniul corect.Set AUTOMAT.Bateria incarcata.Nu opens lens?\015
Tests still camera, if not working, go to the Service.
Repair Help & Product Troubleshooting for Canon PowerShot A75 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The menus of my Lumix FZ10 are displaying in strange way. When I buy the camera (3 month ago) the menu display as seen on the manual. It whas OK , but now I habe a curious menu with only very few functions.
It's likely that there are settings on the camera that change the menu style - my Panasonic lets me reorganize the menus and change the way they look.Here's the manual: ... Panasonic Lumix DMC-FZ10 Digital Camera
My problem seems to be the same as everyone else's. The display works and menu can be seen also, however, the lcd screen is black, the images cannot be seen on screen or through the view finder.
This one may help\015\012\015\012http://www.fixya.com/support/t2166708-black_screen ... Canon PowerShot A610 Digital Camera
The display can be seen only menu
Tests still camera, if not working, go to the Service. ... Canon PowerShot A75 Digital Camera
Trail sentry HI People; I have a 11-9000C and after setting it up I get the 0 then I'm waiting on the first shot to see if the camera is working. In about one minute the display shows SLP then shuts down. I can push the menu button and it come back to 0 setting like the beginning. Have you ever seen this before? Thanks Laurent
The SLP stands for sleep mode make sure that you have a san disk memory card this card is what you should use in a bushnell trail camera.Do not go above what gig they tell you in your manual,try a set of new copper top alkaline duraclells.If your mem ... Bushnell 11-9000 Digital Camera
Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec
Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras
My Samsung TL220 lens won't close. It doesn't display an image on the front or the back. However, when I trigger the menu, the lcd displays "No Image File". It does go through and displays all the different menu options, so the lcd must be o.k. Could this be fixed with software or software update or do you think this is a hardware problem? ( I've noticed several TL220 that have this problem.) Is it an easy fix & how much do you think it would take to fix? Thank you.
Well, there must be a setting that was unintentionally set. First, I need you to try restoring the camera to its default settings. Go to Menu settings and then choose Reset. Let me know if this works or not so that we can move forward to other fixe ... Samsung DualView TL220 Digital Camera
Canon Powershot S1 IS has blurred image on both flip display and internal display (identical); menu graphics display fine, menu functionality (changing options) diplays and works fine.
Your Canon S1 IS has problem of CCD Imager Sensor and need to be replaced.Canon has announced free of cost repair scheme for such problem in S1 IS model.Click ... Digital Cameras
LCD monitor works to display picture already taken and the menu display, but with not display live images. Must use the view finder. Menu does not have a "live view"
There is no function to do this on the EOS 400D. Don't forget the camera is an SLR and still has to open and close a shutter to take a picture. The image is then converted using a CCD instead of exposed on film. I find with my 20D I just take loads o ... Canon EOS 400D / Rebel XTi Digital Camera
Menu, arrow, display, zoom and shutter buttons not working
Before we try anything set the mode to normal take out the memory card and turn the camera on normally. This may get it out of the loop it is stuck in.There is a reset for this camera if it will respond. Turn the mode switch to playback. ... Panasonic Lumix DMC-FX01 Digital Camera
Nikon d70 There is no display on the monitor screen. When I press menu the screen turns white. No menu items and no photos are displayed. I aso note that the date has gone wrong - gives 2004-date for photos taken today when I read memory card on my laptop.
... Nikon D70 Digital Camera
My camera taks picture but i cant see them on display..the display is black but when i press the menu button i can see the menu..do i have a problem with the lenss?
Hi, I have the same issue with this camera and Fuji suggested that it could be the sensor fault. Strange to see that you had my same problem at the same date of mine. Did you get a solution or managed to see if there is a Sensor recal like for many o ... Fuji FinePix A820 Digital Camera
IMAGE IS NOT SEEN ON SCREEN BUT MENU IS SEEN
The CCD censor or circuit is faulty. Needs camera shop. ... Kodak EasyShare C613 Digital Camera
In my nikon d50, after I take a photo (when it displays) on the screen), it is covered with a semi-transparent menu of details about the photo. Not a histogram, but a text display with items like the date the photo was taken. Or it displays 4 small numbered thumbnails. When I click enter, I zoom. I just want the REGULAR display mode.
Press up/down on the multiselector until you get the view you want. ... Nikon Digital Cameras
Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho
I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera
Camera repair The LCD display is white with red lines going through it. Even the viewfinder does the same thing -- white. When I hit the view button, the same thing sometimes. It seems to do worse outside. You can faintly see the pictures I took in the LCD display. Now the LCD display is totally black. What's wrong. The menu display still works. What can I do?
Time for a new Camera. It is about 150.00 to replace the LCD. it is cheaper to replace it unless you can just use the viewfinder alone!! ... Kodak EasyShare Z612 Digital Camera
Menu is seen but picture is not seen on screen
Hello, Will it take a photo ? Sounds like bad sensor unit. High dollar repair.Best Regards, Russell ... Kodak EasyShare C613 Digital Camera
LCD screen displays menu items but will not display picture capture & won't take pictures
A very common problem with many Digital cameras. It sounds as if you are suffering from either a CCD problem or a video board problem. Impossible to tell without it being on the bench to check.\015\012\015\012You could dismantle it and check there's ... HP Photosmart M307 Digital Camera
When turning on my Panasonic Hx-DC1 camcorder there is no Menu. Pressing the 'Menu' button does not display the menu options.
It's likely the ribbon cable on the main board is dislodge, you need to take the whole unit apart, if your carefull its not to bad to disassemble, you need to take out the side panel, under the power board, the one with a big black capacitor, you nee ... Digital Cameras
The display on my Ixus 500 has gone blank. It started to show weird colours when switched on but turning it off then on returned the display to normal. I knocked the camera the other day and the display is now blank both in camera mode and picture review mode. The camera makes the usual noises when selecting Menu etc. It also save picture to the memory card. Is it worth taking it to bits to look for a loose connection?
This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot SD100 / IXUS II Digital Camera
Focus problems Hi, my camera is not focusing clearly. We just used it recently and can look at clear pictures on the display screen but now when we go to actually take a picture it's blury (on the display screen and if a picture is taken). I also notice that all these different setting menu's come up on the display screen when we are in take picture mode. I took it in today and they said the lens could have been bumped or that their is something wrong with the focusing inside. So they would hav
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot SD100 / IXUS II Digital Camera
Kodak M763. Display works all right if I review photos already taken, but there is usually no display when I try to take a picture. It's black. It may be that, if the battery is fully charged, I may see a display in a sepia tone or a bluish overcast. The information on the screen is bright, it's the viewfinder image that can't be seen. It would have helped me if I could turn it on while its charging, but I can't. That would have solved te question of a low-voltage electrical input. If a subject
Battery could be your issue, But it could be more then that have you try ed to firmware it. Go to the manufactures website download the latest firmware and update that. Now if that does not work don't kill the tech here he i ... Kodak EASYSHARE M763 Digital Camera
Hi, i have a sony alpha DSLR- A200 that is working well but now i can't get the menu display to work - when i take a picture i can quickly see the play back on the lcd monitor but if i press play or menu nothing appears on the lcd monitor. Then menu usually will show me battery life, etc but I can't find any of that..I have tried recharging the battery, removing and re-inserting the battery and the memory card and no luck. I can take photos and download them I just can't review anything on the
... Sony Alpha DSLR-A200 Digital Camera
I have new Canon 500d but i can't work out the LCD screen to display my live view to shoot. The screen displays only the Menu or the Shooting Settings Display. i have the same problems with Rina, Thanks Jun
I wish you know that you need to press LIVEVIEW button marked red Dot to\015\012 enter live view mode.Further more it will work in P,T,A,M modes and\015\012 video camera modes only.Still it does not show live view the camera has\015\012 a fault ... Canon EOS 500D / Digital Rebel T1i Digital Camera
Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as
I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera
Dear Camera expert, I bought a brand new Nikon dslr D80 a few weeks ago. From day one I tried to know the Camera, I found problem when I go to cameras "custom setting menu" at rear screen. It displays No memory card? Lock. Whereas there is always a memory card. No. of shots are erratic: Some times there is one shot and no shot further and No memory card display remains on rear screen. Sometimes I am able to take more shots but problen of No memory card display remains Regards, Ja
Hi,I know this is really irritating display and this is a common problem with canon and nikon camera's.Turning off this little annoying feature can be easy or challenging, depending on which camera system you are using.For ... Nikon D80 Body Only Digital Camera