Having problems with your Canon PowerShot A75 Digital Camera ?

I successfully loaded the software that came witht he A75 onto my new Dell PC (OS = Windows Vista). Afterwards I connected the camera to the PC using the provided cable and the computer recognized it. I then followed the directions for using the software for the first time, but nothing happens. Any thoughts about what could be wrong?


Answers :

If your camera is not relatively new and you're running Vista, Vista may have problems seeing it. Unfortunately, this can't be corrected as Canon did not update the drivers for your camera for Vista. But there exists a good, if not better alternative way to download your photos. Please don't take the following as a sales pitch as it's not, but please see this link, as it describes the use of an inexpensive USB card reader as a much easier, faster, and less error prone way to download your photos. In fact there are several important reasons discussed in the article for using a card reader vice downloading from the camera. USB Card readers are also very inexpensive these day, with cost virtually not an issue. Note that you'll need a reader stated capable of reading CF cards.\015\012
\015\012
Repair Help & Product Troubleshooting for Canon PowerShot A75 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I successfully loaded the software that came witht he A75 onto my new Dell PC (OS = Windows Vista). Afterwards I connected the camera to the PC using the provided cable and the computer recognized it. I then followed the directions for using the software for the first time, but nothing happens. Any thoughts about what could be wrong?


If your camera is not relatively new and you're running Vista, Vista may have problems seeing it. Unfortunately, this can't be corrected as Canon did not update the drivers for your camera for Vista. But there exists a good, if not better alternati ... Canon PowerShot A75 Digital Camera

Nikon s6000 driver doesn't want to install. I've tried installing and unistalling the software suite multiple times. I've tried dl'ing the driver directly from the CD via updating the driver throiugh device manager. Nothing I've done so far can get the computer to recognize the camera. Well that's not quite right. When I plug it into the USB port, I get the typical "boing" noise Windows makes when you plug in a plug and play piece of hardware. The USB drive port remains in a harddrive type of ic


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Nikon COOLPIX S6000 Digital Camera

I cannot get the pictures off the camera. When I plug it into the computer the program will not recognize this camera my canon A590. So I am unable to download my pictures. I do not have this problem with any other of my cameras. At first I thought it was the usb cable, but I have tried other cables and they do not work either. Any Ideas. I use a mac computer and Iphoto program. At times, I have gotten it to work, but now nothing. Please help thanks T Riley


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot A590 IS Digital Camera

I am trying to download pictures from a Canon Pwershot A75 for the first time to my laptop. I have installed ZoomBrowser EX from a CD. Unfortunately I am traveling and don't have access to the CD. When I plug the camera into my laptop using the UB port here is the error message I get a message that states "One of the USB devices attached to the computer has malfunctioned and windows does not recognize it. I followed the wizard to correct the problem and then the wizard tells me that the driv


Try the following:\015\012\015\012Use a different USB port on the computer.\015\012Reinstall the chipset driver for the computer.\015\012Try use any other USB device on the s ... Canon PowerShot A75 Digital Camera

I cannot find how to delete my photos from my canon A720IS once I have downloaded them onto my computer using the Canon Window software that came with the camera. I have had canon cameras before and used the software that would give you the option to clear the camera once you have downloaded. This time - nothing. I have over 300 photos on the camera - help I can't delete one at a time!


The first thing to do is to remove any supplied software that cane with the camera[In this Case Canon]Windows is capable of carrying out operations required.When plugging the camera in - Windows wil ... Digital Cameras

I am using a fujifilm 2GB M xd card. After a photo shoot, when I turned the camera on it said "card not initialized." What can I do? I really do not want to lose these photos, as they were from a shoot and are worth a lot to me. I tested another card out using recovery software and found that if I formatted it from the computer I could recover the photos, but if I formatted it from the camera I could not. I tried formatting my 2 GB disk with the precious photos from the computer, but it did noth


Hi,You shouldn't be formatting the card at all if your trying to retrieve pictures from it? What recovery programs have you tried on the card? What results have you gotten. In my experience some of the pictures should be recoverable depending o ... Fuji FinePix S6000fd Digital Camera

Just tried to hook up my camera to my computer and the computer is not recognizing the camera for some reason. Is it possible that the USB cable is bad. I am not getting an error message and we have done this many times without the software installed. We installed the software that comes with it and it wn't allow us to do it either. We just downloaded norton antivirus 2009 to our computer and this is the first time we have tried since doing that. I think the USB cable is bad but it's pretty new.


I think the USB cable is bad or ur USB port might be loode.. ... Canon PowerShot S5 IS Digital Camera

I am using a fujifilm 2GB M xd card. After a photo shoot, when I turned the camera on it said "card not initialized." What can I do? I really do not want to lose these photos, as they were from a shoot and are worth a lot to me. I tested another card out using recovery software and found that if I formatted it from the computer I could recover the photos, but if I formatted it from the camera I could not. I tried formatting my 2 GB disk with the precious photos from the computer, but it did noth


Formatting on the computer or in the camera erases the card. That is not what you want. Use a separate card reader to download the pics (if they still exist) to your computer. If that's successful, then format the card in the camera (not the computer ... Fuji FinePix S6000fd Digital Camera

My Kodak C913 sometimes follows switch on with the statement memory card needs formatting. I have tried to do this several times but to no avail. I am then faced with a message which says that I should use a new card. I am now on my third card and I still get the formatting message. This does not happen every time I switch on but about 8 times out of ten. the other 2 times the camera works well whilst it is still switched on. When I switch off the problem re occurs. There is nothing wrong with a


First of all, stop putting your cards in another camera....this can corrupt the card. With no card in the camera, go into the menu and find "reset"...follow the on-screen instructions. Insert your card, turn on the camera and go into the camera menu ... Kodak EasyShare C913 Digital Camera

Drivers With my Fuji S700 camera, do I have to use the software photo program to download to my PC with Windows XP Home or can I just install a driver like I use to use on my last Olympus C-700, or will I damage the camera if I try to auto recognize the S700? Thanks for your time and answer in advance. J i'm ME


I'm having a similar problem, after having my camera repaired. Now, the computer (Windows XP) doesn't even recognize the camera. I'm now dowloading my photos via the memory card and it's working. ... Fuji FinePix S700 Digital Camera

I have just bought a cannon 40D THE SCREEN COMES UP WITH THIS MESSAGE:CAMERAS INTERNAL TEMP IS BECOMING TO HIGH CANNOT SHOOT. i HAVE NOT USED THE CAMERA MUCH JUST LOOKED AROUND THE MENU FEATURE ETC AND TRIED TO TAKE A PHOTO IT IS THE FIRST TIME USING THIS CAMERA. i AM USING A SCANDISK 111 4 gb. i HAVE FORMATED, THERE IS NOTHING ON THE DISK ANYWAY. TAKEN THE BATTERY OUT AND REINSERTED. ??????????????


It appears you have a defective camera body, warranty should cover it. Go to canonusa.com and contact their service dept.\015\012\015\012Hope this helps out. Happy Thanksgiving!\015\012Gom ... Canon Digital Cameras

Panasonic NV-DS27EG problem: sudden degradation in function following (though could be coincidence) first ever use of DV-out socket on camera (to connect Dv-in on Panasonic DVD recorder). First symptom: no picture displayed when attempting to play back a tape in VCR mode. Second symptom: power light stayed on even when camera switch was at the off position. Third symptom: message in viewfinder asking for the reset button to be pressed. Found and pressed reset button then: Fourth symptom: "to ser


... Panasonic Digital Cameras

How do i load my memory card photos from camera to the kodak easy share software that is on computer? my first time using a digital cmera and very limited knowledge using my laptop. please, help me!


Hello!!Connect your camera to the comp and open the kodak share application and store it!!!Just try exploring the features u'l get to know!!!Thank you!!!!!! ... Digital Cameras

Please could you recommend a flash I could get that will work with my Nikon D70? My late father was a photographer, and he used Metz flash units, but they've all gone now, and I'd like to get one for myself- preferably soon! Thank you. Tim (By the way, I've just encountered your site for the first time, and have just taken a look at the 'Recent Metz Solutions' section at the end of the screen. Congratulations on anticipating what is needed, and providing a means of making the process of finding


A local Walmart would have a variety of flash units....get one dedicated for Nikon digital SLRs. Ritz Camera is another good source of non-name brand flashes. Please leave feedback if this helps. ... Digital Cameras

I bought a xlt about 2 months ago an ive only had it out for about 3 weeks and the batteries went dead and now the only thing it will do is when you put new batteries in it there is a red light on the front of the camera that flashes three time and thats it. I used the batteries and SD cards that bushnell recommends and followed all the directions on the use of the camera.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\ ... Bushnell Digital Cameras

I got a Disney kliq fun digital camera (1.3MP) , model #:M030-201033488 recently for my kid, the CD comes with the camera only has software for Windows 2000, Me or XP which does not work under VISTA that I use(the camera could not be recognized with usb connection), how can I get software & usb driver for the camera under Vista?


... Disney Pix Click Digital Camera

Hi, I got a new ProSpec 4gb flash card and used it last night in my canon 40d. I forgot to format before I initially used it. Shot lots of great images that I could see on the camera back, but now I am getting the messages - can not create a folder, tried to shoot another image and is says cf card is full, and now I can't review on camera, it says there are no images. Tried Digital Photo recovery software and got nothing. Anything at all I can do? I'm tempted to format now and then see if I can


I do not have a solution, but I do have same problem, or a variation of it: filled my ProSpec 2GB, removed it from my Canon G10 to insert a fresh card, then later reinserted the ProSpec to transfer photos to computer. Several tries, and no go. First ... Canon Digital Cameras

I just recently purchased my camera. It worked the first time I used it, now it will not turn on. I have replaced the batteries to be sure this was not the problem. What is going on? I have put my ear up to the camera and I can hear a clicking noise when I push the on button. Nothing else happens. No lights, No screen....nothing.


Normal batteries it's not working for me!You must replace standard alkalines with rechargeable NiMH batteries Sony or Varta 2700 Ni-MH. For me it's was working!My camera it's turn on every time! ... Fuji FinePix A850 Digital Camera

Soft Images Is it normal for images taken with a canon EOS 20D to appear soft. this is my first time using a digital 35mm camera and i am not impressed with the image quality of the camera and the L lens i used. is there a specific workflow that i should follow? thanks


Have you done the basic unsharp masking after RAW processing? Normally you'll find a 500% strength, 0.3 pixel and a threshold of 1 or 2 brings out the detail masked by the AA filter very well. DOn't bother with the sharpening in PS ACR....it's too cr ... Canon EOS-20D Digital Camera with 17-85mm Lens

Hi i'm looking to download the picture project software for my nikon coolpix. where can I find it? I tried following the links provided by the previous experts, but in each case the download failed. The first .zip file actually downloaded, but the data didn't come through. The second link (in the comments section that directed me to Nikon support) took me to a page to download the software, but when I clicked the link it took me to this page: http://support.nikontech.com/app/answers/list


Hi,\015\012\015\012\015\0121) Nikon has stopped providing downloads for full versions of Picture Project,\015\012and is only providing updates for existing users who have the older version of Picture Project installed on their PC.\015\012 ... Nikon COOLPIX L18 Digital Camera

Help well my sister-in-law bought a vivitar vivicam35 digital camera from a friend, but she didnt get anything else with it...no software,manuel,nothing....and she gave it to me but i dont know anything about it. I would like to know how to get the pictures i take on my computer,but i have no idea how....and i was wondering if it can also be used as a webcam....please hepl me.... reloaded software 4 times still will work


Well ok 1 you must connect the cam with a USB cable to your pc windows xp wil install it automactic!!! ... Vivitar ViviCam 3750 Digital Camera

PULLED OUT THE FLASH CARD FROM E-620 AND TRIED TO DOWNLOAD INTO MY COMPUTER USING OLYMPUS MASTER 2 SOFTWARE. CARD WAS PLUGED IN DIRECTLY INTO COMPUTER PORT. COULD NOT GET SOFTWARE TO WORK. WHEN I REMOVED THE FLASH CARD AND REINSERTED INTO MY CAMERA, I GET A CARD ERROR. WHAT CAN I DO. DON'T WANT TO LOOSE MY PHOTOS.


... Olympus E-620 Digital Camera with 14-42mm and 40-150mm lenses

I have a panasonic SDR 1140 I have problems editing video data and the Panasonic assistance team told me to uninstall and reinstall the software. each time i try to on both my PCs it saya that it cannot do it because there is a more sophisticated program already installed. i removed everything I had my Media Player Codec, from this PC I am using and it didn't help. When I tried to install it into my other PC which has hardly anything on it I got the same message. It is not the first time this me


Hi.\015\012\015\012\015\012The more recent version of the driver software is probably Windows default driver installed when you connected the camcorder USB before installing drivers from disk.\015\012\015\012\015\012If you hav ... Panasonic Digital Cameras

Viewing panel I have a new Cybershot, (birthday present in May 06)and I have only used it on two occassions. However, I tried to use it a few days ago and came across a problem to wich I have yet to find a solution. Since, I turned the camera on the very first time everything has been set to the manufacture's suggestion and to automatic settings. This has never been changed! However, when I took a photo the other day the resulting image on the veiwing panel was so small I could not reall


Lies all lies!. first turn on your camera and check what resolution the images are set to record at. turn your camera to picture taking mode and press the trash button once. then you will see the available resolutions you can shoot at. i recomend 4M ... Sony Cyber-Shot DSC-S40 Digital Camera

Hi, I have problems with downloading pictures from my Canon PowerShot 200IS. The PC is not recognizing the camera any more (used to work before). It doesn't work using the UBS-cable nor insering the memory card directly inte PC. I have tried to reinstall the software, but that didn't help. Regards, Anneli


I hope its usb cable my have some problem..... try to purchase a new car reader to insert memory card into it and plug it to pc via usb port..... then also if you face same problem then check you usb port drives and install them......... to rectify t ... Canon PowerShot SX 200 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4184 seconds