Having problems with your Canon PowerShot A75 Digital Camera ?

Nothing displays on the LCD monitor

\015 Canon PowerShot A75\015\012Nothing displays on the LCD monitor. Even when focusing for a picture, the monitor stays black with a light purple strip to the far left.\015

Answers :

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. Please check this link for more info.\012
\012
\012Applicable cameras include:\012A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S230, S400, S410, S500, SD100, SD110, IXUS V2/V3/300/400/430/500/II/IIs, IXY Digital 200a/300a/320/400/450/500/30/30a \012
Repair Help & Product Troubleshooting for Canon PowerShot A75 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi, i have a sony alpha DSLR- A200 that is working well but now i can't get the menu display to work - when i take a picture i can quickly see the play back on the lcd monitor but if i press play or menu nothing appears on the lcd monitor. Then menu usually will show me battery life, etc but I can't find any of that..I have tried recharging the battery, removing and re-inserting the battery and the memory card and no luck. I can take photos and download them I just can't review anything on the


... Sony Alpha DSLR-A200 Digital Camera

Lcd monitor is cracked and displays nothing. Should I just junk the whole thing or can i replace the lcd monitor cheaply???


No need to junk the whole thing just contact your nearest Authorized Olympus service center and they can fix the LCD screen with a genuine one in less than 150 USD.PLEASE DON'T TRY TO OPEN IT OR REPAIR BY YOURSELF as it can can cause severe damage to ... Olympus Camedia E-20N Digital Camera

Nothing displays on the LCD monitor


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. ... Canon PowerShot A75 Digital Camera

D40X LCD Hi Dear Because of the removal of the control panel LCD the D40X uses the main LCD monitor for camera information display and the change of settings. By default this display is not shown, instead you press the 'info' button to show or hide it, you can optionally have the display on all the time. My question is: What i have to do for have the LCD always on. Thank you Quim


Return the control panel in order back to normal. ... Nikon D40x Digital Camera

PV-DC152D CAMCORDER, LCD Display only works if it is pulled out, turned 180 degrees and pushed back into place so the display is facing you. If you move the LCD display over 3/4" away from camcorder it will go black again. Personally, I think this is an issue with some sensors that gauge when to turn on the LCD display "ON" and Viewfinder "OFF" and vice-versa. Any help on this would be appreciated since there is nothing else wrong with the camcorder.


The most likely problem is a cracked ribbon cable that goes between the camera and the display. The cable needs to be replaced. Typical cost for this is around $40 or so plus labor. I would not suggest that you attempt this repair yourself as open ... Panasonic Digital Cameras

Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.


Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera

LCD monitor does not light up, and consequently, does not display any image (as some other digital cameras do) during the aiming and focusing processes - sort of prescanning the image - before the shutter is half-way then fully pressed. In other words, is the LCD monitor designed soley to display image review (playback) and show menues!


Actually the reason is due to the way an SLR works. The shutter doesn't open up to the CCD device (the digital equivalent of the film) until you press the shutter release button to take the shot. Until then, an angled mirror points the viewed image u ... Canon Rebel XT / EOS 350D Digital Camera

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!


You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

The lcd monitor does not display


But are u sure that it is able to capture images? are u able to transfer the images to your PC? ... Digital Cameras

Lens Problem I just bought an Olympus C-8080. While switching the camera on there are some 4 to 5 light pixels on the display (lcd monitor on the back of the camera), even when directing the camera into the dark. It is not really a problem now, but do you also have this problem with your LCD monitor? What if they become more?


Dead pixels are a nightmare of every LCD screen. There is no way to avoid them - you can just hope they never happen to you. There is no pattern to how they appear and when, but the ones you have will stay for ever. If they bother you right now, send ... Olympus Camedia C-8080 Wide Zoom Digital Camera

LCD display My LCD display does not work anymore.When is on there are some colourful lines,but I can't see nothing through.


This 1.7" LCD is made by AUO and it is most likely defective. You may try reseating the internal ribon cable of the LCD connected to the printed circuit board by opening the camera back case (5 small screws) with a tri-wing screwdriver size #000. Car ... Fuji FinePix A350 Digital Camera

LCD monitor is not working ( the photo taken is not displayed on the LCD screen whereas other details like AUTO, S/L/M, no of photos can be taken are displayed) pl. help


One of two possible things. First try pressing the DISP or DISPLAY button on the back of your camera. This manually turns the LCD screen on and off to save batteries. You would then use the optical viewfinder in its place. If this doesn't fix the ... Canon PowerShot A580 Digital Camera

Lcd screen the screen illuminates,but it doesn't display anything. lcd screen is blank white, nothing displays, but it takes a picture you just can't see it.


I think the issue with your camera could be that the ribbon cable that connects the LCD screen to the circuit board is loose somewhere. In order to fix this, you will have to carefully disassemble the camera. Inspect the ribbon cable to see if it is ... Samsung Digimax i5 Digital Camera

G5 shoot mode nothing on lcd, flash fires, nothing on lcd. pictures from the pass are on the CF card and can be displayed. New battries and I have tried with a new Cf card formatted


... Canon PowerShot G5 Digital Camera

LCD Display When I release the shutter, the access lamp(red light) comes on, the pix is not displayed on the lcd monitor and the camera shuts off. Battery is charged. Any ideas? Terry


I was cleaning my CCD and damaged the shutter. Same problem. Click to take a picture and the camera locks up and powers off. Turn the camera back on and the shutter releases and the camera resets and powers on. $281 service call later and Precisi ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

Gateway DC-40. I attempted to format a new 4GB compact flash card. I guess I must have done something wrong. I now have no monitor LCD display, the camera will respond to the on/off switch and the lens will extend. But, the camera will not respond to any of the other switches.In the LCD panel indicator display have an L in the upper lefthand corner and in the upper RH corner I have the auto flash and red eye reduction icons. I had installed the CF card the day before and everthing was fine excep


Hi,Remove the Card and see, if that would help the situation. Update the Firmware, if available.Let me know the progress, so we could proceed.Hope i helped you.Thanks for using ' Fixya ' and have a nice ... Gateway DC-M40 Digital Camera

LCD Monitor Is there any way that I can see the picture on the LCD display monitor before I shoot the picture so that I can put my object of interest in the right place. Thank you.


No\015\012\015\012 \015\012\015\012when looking through the eye piece, press the shutter button half way down, you will see red focus points. Use those to align the image. ... Canon Rebel XT / EOS 350D Digital Camera

Lcd screen sir i got my camera 1year 2 month dack once my lcd screen display no image and repair it in service centre in warranty period but again my camera fall from some height my lcd screen again show nothing i carred it back to service cetre they said my lcd screen has damage and require new lcd screen its price coast about 5000 what is its actual price and i got my camera repair in cepest way.


HiWe have your LCD available for purchase in our store (google: darntoothysam com) or you can look for a defective camera online and buy it and remove the LCD to use to fix your camera.If you can do the work yourself the chea ... Sony Cyber-shot DSC-W55 Digital Camera

Can't get a picture on the screen - just shows black. When we turn the camera on the LCD screen displays the function choices and menu options, but will not display any image. If we take a picture using the view finder and then check for the image, nothing is displayed. We just checked the memory card, and it doesn't even take a photo. All we got was black. Any suggestions?


Check the SD card, they have sliders on them which lets you "lock" the card so nothing can be put on or taken off of it. Make sure that is off. Then go through the menu on the camera and try to format the card again. If the card is bad it should give ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom

Blank lcd I just got a new canon 600D. After playing with it for a while, i turned it off. Then after 5-10 mins i turned it on once again, and opened the lcd screen, but it shows blank(or say black). I can see that the lcd backlit is workeing, but nothing (no content) is displayed. Can this be an issue of low battery ? pressing the shutter button full also not capturing the picture. Flash works though, and optical view finder too, but it does not capture the photo.


Hi there:Some symptoms of a defective CCD include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. ... Canon EOS 600D Rebel T3i Digital Camera

LCD monitor works to display picture already taken and the menu display, but with not display live images. Must use the view finder. Menu does not have a "live view"


There is no function to do this on the EOS 400D. Don't forget the camera is an SLR and still has to open and close a shutter to take a picture. The image is then converted using a CCD instead of exposed on film. I find with my 20D I just take loads o ... Canon EOS 400D / Rebel XTi Digital Camera

Canon rebel xs, the LCD monitor DOES NOT display, the shutter DOES NOT release, and the BUSY indication remains lit in the viewfinder


... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

The LCD monitor does not display image to be taken


Little old DSLR cameras won't show live image in LCD. You can see live view through view finder only to take picture.LCD is just for playback in old DSLR models.Recently new models launched that has live view capability on LCD. ... Nikon D70s Digital Camera

There if nothing being displayed on the LCD, to indiciate what you are taking a picture of, and when you take a picture, it just shows a blurr. I took a picture using this memeoy card on a different camera, and can see that picture in the display.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A70 Digital Camera

I have a Canon A75 Powershot in excellent condition. Since yesterday it dosn't work. When it is in capture mode, I cannot see the picture from the LCD display. Display is working. When I try to take picrures I get a black picture with nothing on it, just like I am capturing in a very dark place. But I can see pictures that I have captured before the problem. What can I do? I am Christos, from Cyprus. Is there anyone who can fix this problem with my camera?


CCD is gone.Need replacement. ... Canon PowerShot A75 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1379 seconds