Having problems with your Canon PowerShot A75 Digital Camera ?

LCD Monitor remains black except in stitch assist mode

\015 I would like to get the LCD screen working in all other modes. I have treid removing and replacing the batteries. I have held set and then turned on the power and I have tried resetting settings to default as listed on page 73 on themanual. when in stitch mode. The reset settings to default comes on and the busy sign comes on but nothing resets. Any suggestions?\015

Answers :

I think this is most likely: A/V plug has become faulty: http://www.fixya.com/support/t980272-a85_lcd_stays_off_in_all_modes_except
Can you see the menus?? Can you see pics in "reveiw" mode? If yes, and this is only a "taking picture" issue, then the LCD is good. You probably have a bad CCD. Canon USA will repair this for free. Go\015\012here for details. They will send you 2 emails. One with the UPS label\015\012and another with info sheets to be sent with the defective camera
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
Repair Help & Product Troubleshooting for Canon PowerShot A75 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

LCD Monitor remains black except in stitch assist mode


I think this is most likely: A/V plug has become faulty: http://www.fixya.com/support/t980272-a85_lcd_stays_off_in_all_modes_except ... Canon PowerShot A75 Digital Camera

LCD screen is black except in stitch assist mode.


Probably: A/V plug has become faulty: http://www.fixya.com/support/t980272-a85_lcd_stays_off_in_all_modes_except ... Canon PowerShot A75 Digital Camera

Lcd screen The lcd screen went black and the only way I can get it to come on is with the mode dial on stitch assist


This seems more likely: A/V plug has become faulty: http://www.fixya.com/support/t980272-a85_lcd_stays_off_in_all_modes_except ... Canon PowerShot A75 Digital Camera

My Fuji FinePix S5000 has given me years of excelent service. While on break I stored the camera for 2-3 months. When I pulled it out I noticed I had inadvertantly stored it in the "playback" mode. It was of course in 'power save off' mode but when I turned it back on, the viewfinder and LCD monitor are black and it takes black pictures like as though the lense cover was on. Everything else is normal, I am able to view previous pictures saved on the xD card and it shows promptings on the monitor


Have you tried removing the actual lens(?) to see if there's something inside the camera house that's not supposed to be there. I'd find it highly unlikely that the, thou who knows. The best thing to do, would be to drop it off at your local camera r ... Fuji FinePix S5000 Digital Camera

I was taking pictures outside using a tripod mounting and had my Fujifilm FinePix S5000 on in photography mode - Auto mode. Upon placing the tripod for a new photo, I observed that the LCD monitor had turned white with intermittent horizontal flashing black lines. The view through the viewfinder is also white but without the black lines. When a photograph is taken the image is white. I should point out that in Playback mode I can view previously taken photographs perfectly on both the moni


Hi,It seems ccd imager chip problem, ccd imager chip is electronics device that converts an image into electronics signal. It is located at end of lens assembly in camera.CCD imager chip will be replaced to get correct view in camera mode ... Fuji Digital Cameras

A85 LCD stays off in all modes except "stitch"


I have the exact same problem for my Canon A85. I happen about two weeks ago. I tried Dieter's method to connect the A/V output to my TV. The image were displayed on TV.What kind contact spay you used? I would like to try.Yufe ... Canon PowerShot A85 Digital Camera

Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.


Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera

Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig


That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera

Canon a520 lcd won't come on except in stitch mode


Can you take *** to a camera place to have it serviced ... Canon PowerShot A520 Digital Camera

My LCD Monitor displays only black w/ fuzzy white bands or blocks as I move it around. No images come on at all. This was an intermittent problem, but now that's all I get. All 14 modes affected - none work. Cannot take pictures at all, however, images on the CF Card are still viewable.


Is this Canon A95 camera or some other model?Let me know exact model number please as symptom shows its defective ccd imager IC problem.Awaiting your reply to proceed.Thanks. ... Canon PowerShot A95 Digital Camera

Not able to transfer pictures from my Rebel xsi to my computer. The selection screen doesn't appear on the computer and the LCD monitor on the camera remains black. Instruction manual says see Software Instructions on CD-ROM, but my computer doesn't have a CD drive.....Have transfered pictures without problems before.


You can download the manuals from the manufacturer's web site at\012\012\012http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_rebel_xs_18_55is_kit#BrochuresAndManualsYou might want to consider NOT connecting yo ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

When I turn the camera on, the image that I am shooting does not show on the LCD monitor. When I switch the camera mode to view images I have taken previously, they show up but the new images are not showing (they are completely black) Can you help?


There are many point you may want to look at.\015\012\015\012first, if the LCD does not display the picture you just capture, there is a possibility that the digital module of the device is broken and that it does not show or save the pic ... Digital Cameras

Canon s21s I bought my camera in March 2006 and have not had a problem until 2 weeks ago. Both the viewfinder and LCD screen are black when trying to take a picture but the icons remain on the screen. The lens continues to pop out so obviously something in the lens shutter is not opening up. But previously taken photos are visible with the playback mode. Has canon offered any help yet?


Think that you mean the S2 IS? If so, Canon has not yet to offered an advisory repair of that particular problem (although many people think they should as this seems to be quite a common problem for the S2). There are however some simple things tha ... Canon PowerShot A75 Digital Camera

Super macro It says hold macro button for more than a second to get super macro mode and I'll see its icon appear on the LCD monitor. It doesn't. The image remains blurry.


Press the macro button once to get it to display the Macro Mode sign. Press and hold it after that to get it into Super MacroOnce you are in Super Macro, you can't move the lens so you MUST use the Manual Focus (MF) button that is locate ... Canon PowerShot S5 IS Digital Camera

While in shoot still mode, LCD screen is blacked out except for faint flshing light in background.


Good possiblility LCD backlight is out.alamocamera.com ... Sony Cyber-Shot DSC-T1 Digital Camera

No display except in stitch assist and camera shoot mode


Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on ... Canon PowerShot A70 Digital Camera

I bought the camera in the UK but I have since moved to Portugal and have only now had a chance to get the new camera out. This, I know, is my fault. But, nevertheless, I can't get it to work - the LCD monitor remains black when shooting whatever I do. It will take pictures via the optical viewfinder okay but I cannot get the screen to show. It works to display the settings etc but not for taking pictures so that when I press the display button it alternates between the photo settings (which


Canon models oddly do not support images on the LCD in every picture mode. Since the LCD works for settings, my guess is its in the wrong mode for the live view and its is not an issue with the camera's LCD.\015\012\015\012Here is a link to the ... Canon EOS 500D / Digital Rebel T1i Digital Camera

When I turn camera on, my LCD monitor screen remains black. No images of what camera is aimed at appears?


... Canon PowerShot A85 Digital Camera

Sony dsc-13 I have sony dsc-13 digital camera and suddenly after switching it on in picture mode and video mode the data(day nd time,flash....etc) appears on a black background on the lcd though the lens door is open and i can see my previouly stored pics in the camera lcd and also in my computer after connecting through usb.. so the problem is i take black pics and videos while the lens is open and the charger attached or on full battery,and the new taken pics displays black as well


Basically it is a Japanese Model from where u bought it u are lucky u can\015\012get it free of charge replacement just tell me which region u belong\015\012there is a known issue of CCD failure u will get free of charge repairs\015\012fo ... Sony Cyber-Shot DSC-T3 Digital Camera

LCD monitor My lcd monitor used to periodically go black, now its black altogether. I can still take pictures, and download them to the computer. Just no viewing on the camera. Any suggestions?


Hello! Sounds like your backlight may be out, unless you're still able to see a faint image when the LCD is "black"...?If you can still see a faint image of what your camera is pointed at, I would assume your LCD is bad. In w ... Canon PowerShot A75 Digital Camera

My sony dsc-w1 got very wet, caught in a rainstorm and did not have the case. I have left it dry out for 4 days and it turns on, lcd works, can read memory stick and display old pictures on the lcd. But when I try to take a picture the lcd displays a black a screen and the picture that it takes is just a black box, flash illlumintor everything else seems to work, except the ability to take a picture, lens moves in and out, but picture is always black, any idea, is the ccd shot


Maybe the shutter got wet and sticky. You can try look into the lens then press shutter button to take picture. If you don’t see the movement inside the hole, the shutter doesn’t open, it will take black picture. ... Sony Cyber-Shot DSC-W1 Digital Camera

LCD monitor The LCD monitor is blank when turn camera on. I can view historical pictures but when switch mode to take picture, the LCD monitor is blank and if take picture, the picture is blank.


This sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\012\01 ... Canon PowerShot S230 / IXUS 179 Digital Camera

Our canon rebel T3 LCD will not display the menu or field of view. We can see the field of view thriugh the viewfinder only. The LCD does work in the video mode, so it is not that the LCD is broken. The LCD is totally black in all picture taking modes. Thanks.


... Canon EOS 1100D / Rebel T3 Digital Camera

LCD screen won't show preview except in C mode


Well, after a little more googling, I'm embarrassed to say I've found the solution. I must have somehow pressed the display button which turned the preview display off. I tried pressing all of the buttons before I made my previous post, but apparen ... Canon PowerShot A630 Digital Camera

My 6 year old cannon powerShot70 won't take pictures, when power up the view in the LCd is black with hazy streaks, shutter clicks and "picture" shows up in view mode the same as LCD screen view. Camera turns on and I can view prev pictures but cannot shot new ones. iused camera outside for about 45 minutes at 2 degrees celius, got great pics but when i tried it one day later got black LCD. HELP!


This is hardware problem you need to bring your camera for service you can this link:http://www.advancecamera.com/repair/\015\012 ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1664 seconds