Having problems with your Canon PowerShot A75 Digital Camera ?

How do you get the case apart?

\015 I have removed the 5 screws outside the case, 2 inside the CF compartment and 2 in the batery compartment. I removed the zoom and the case is loose at the bottom but something seems to be holding it at the top in the area of the mode selector.\015\012Thanks for any help.\015

Answers :

You have to remove the shutter button assembly first. Please see the following for a similar A70:
Repair Help & Product Troubleshooting for Canon PowerShot A75 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do you get the case apart?

You have to remove the shutter button assembly first. Please see the following for a similar A70:\015\012\015\012http://www.thustra.com/A70mod/\015\012 ... Canon PowerShot A75 Digital Camera

Lens spring/s A couple of weeks ago I got the dreaded lens error. In my case it was probably due to sand. I took the camera apart and when I came to disassembling the lens - the spring popped and fell on the floor - as I picked it up it caught in the carpet and I ruined it. So my question is where do I get a replacement without sending the whole camera back to Canon? Also is there 2 springs, as there seems to be hooks for 2?

I had teh same question, I'm trying to repair mine atteh moment and there is only one spring.\015\012\015\012still trying to get teh lens back together propoerly, managed to rip a cable track so have to get another anyway... spewing.. ... Canon PowerShot SD400 / IXUS 50 Digital Camera

How do you replace the lcd screen? Any info on getting the case apart and the new screen in would be real helpfull. Thamks

Here's some examples on LCD replacement. It's not too difficult if you have a replacement screen. But make sure you rea ... Canon PowerShot A590 IS Digital Camera

RE: I have recently bought a nikon d5000 im trying to get rid of the info display on it to view everything on the display please tell me how to get rid of it, and also how to get it back (just incase i need some info which ones the toggle button :S and what do you mean by "most of case top and bottom allow button." Thnx

Press up/down on the multiselector to cycle through the different views of your picture.What context is the quote from? Is that from a manual? An answer on FixYa? ... Digital Cameras

Front case has a dent in ,below the shutter ,? pictures dont seem as good, is it a simple task to remove front of casing to remove dent , ie 4 screws on rear?(or will it all fall apart)

Disassembling your camera voids the warranty. It may or may not be simple task, depending on your experience working with electronics. If you can afford another camera and are willing to take the risk of taking it apart, it may be worth t ... Konica Minolta DiMAGE X Digital Camera

I bought a replacement LCD screen for my Nikon S3000 camera, but when I remove the back case, the connector for the LCD is under the silver plate. I can't figure out how to get the plate off to reach the connector so I can install the new LCD. I've removed screws, but it still lifts only halfway. Is there some kind of trick I'm not seeing to get this thing open?

Hi dear Sir, contact uscamera.com to obtain a repair manual.Regards ... Nikon Coolpix S3000 Digital Camera

I have a nikon coolpix s3000 purple.it is 12 megapixels 4x wide zoom and 2.7 inch lcd-zoom was out-not kept in case-dropped on carpet on cruise ship maybe about 3 feet-get lens error-screen comes on but everything blurry-cant zoom or press shutter button but power light is green-left side of lens is raised up and i see slight gap in casing-right side is pushed down-dont know which side needs to match which side! does this mean that all the photos on my memory card are ruined-please advise-thanks

Your photos will not be affected by this fault. Just take the memory card out of the camera and read it with a card reader attached to the computer.Unfortunately the camera will probably need an expensive repair, or if that isn't economic ... Nikon Coolpix S3000 Digital Camera

Hey I have a Nikon P100 and recently it developed a snag i was not able transfer my Pictures and apart from that i realised after sometime there was another problem my camera was not charging properly. However it shows my camera is charging but it doesn't get charge or gets discharged after couple of shots

This is usually caused by slightly oxidized battery contacts. Clean the contacts on the battery and inside the camera with a qtip and at least 90% isopropyl alcohol. Check your charger output, and if good, you might have a bad battery. One neve ... Digital Cameras

I have an underwater camera "Atlantis AUW-502" that I can't find any wiring schematics for. I had problems with losing the picture, so I took the camera apart and need to know which wires from the camera (lens/board) get hooked to the main cable, which in turn get hooked up to a 4 pin s-video plug.

... Digital Cameras

Olympus 570uz is not working and is not worth the cost of professional repair (as told to me by Olympus), so I'd like to take apart and see if I can get lucky fixing it myself. Otherwise, it's a paperweight. Can anyone tell me the secret to removing the back cover? All discernable screws have been removed, but it's getting hung up by the hot shoe and flash. My next step is to take out an x-acto blade and start cutting, so please let me know the secret. Tried finding a repair manual online with n

The hot shoe is held on by screws which are concealed by a thin plate. You can pick this out with a pair of tweezers (you have to sort of un-hook the edges) to reveal the screws. ... Digital Cameras

Hi, ZS1-DMC ( Black case) Where can I get screw set for case. Also, screwdriver set for electronics? Thank you!!

Here, maybe: micro-tools.com/store/SearchByCategory.aspx?CategoryCode=MODY-PHILLIPSThey do sell other brands t ... Panasonic DMC-ZS1 Digital Camera

Hello, I have a Kodak EasyShare C813 digital camera that is not recognized by my computer. The memory card is also not recognized by my printer. Now it gets confusing. If I take some pictures with the C813 then take the card out of it and put it in my M530, connect it to my printer with a USB cable I get all the pictures off of it. Every solution some very kind people have suggested assumes the C813 is recognized by my computer or printer but that's not the case. The C813 was working j

Please un-install the driver software from your PC , then reinstall the driver or by connecting the camera to the PC to be detected as a new hardware and subsequently installed. If this is not the case then it is for sure th ... Kodak Easyshare C813 Digital Camera

Ive been having problems with my sanyo vpc s1070, everytime i turn it on it says lens error. i got it for christmas in 2008 and not even a couple months later it started doing this.it has nothing to do with the batteries, i love this camera and i dont want to get a new one.sadly i have no money to get it fixed professionally. but if it comes to it i will. how do i fix it. im alrady in the process of being a techno nerd and tearing it apart carefully. please help

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sanyo Vpc-s1070w Digital Camera

I have a powershot a620. The battery compartment is coming undone...where you hold it..so the batteries have a little jiggle room. When it first "popped out" a small amount it was fine. on a recent trip it started coming apart more and the batteries then quit holding a charge. A fresh set of batteries now lasts about 20 min. I am guessing it might be because they don't have as good of a connection but I cannot get that part of the camera to go back under the "lip" and am afraid to take it apart

The battery contacts inside the camera, you can pull them up or towards your carefully so that they reach further.Then close the cover properly and use some tape to hold it closed.this will keep the batteries with a constant g ... Canon Digital Cameras

I had taken many pics in Florida in the last several days with my camera and then 2 days ago, I tried using the camera and I am getting the message "Card Not Intitialized". The camera was kept in its case and did not get wet. Does this mean I have lost all of my photos on the card? Is there a way to correct this ???? The camera is a Fuji FinePix A360 digital camera. The card is a Fujifilm XD-Picture Card, 1GB. Thanks for any help you can offer. JW

Get yourself a card reader and use it to download the pics from the card. Then, format the card in the camera. This reader is $13 at Walmart.\012 ... Fuji FinePix A360 Digital Camera

I bought a replacement LCD screen, but when I remove the back case, the connector for the LCD is *under* the silver plate. I can't figure out how to get the plate off to reach the connector so I can install the new LCD. I've removed screws, but it still lifts only halfway. Is there some kind of trick I'm not seeing to get this thing open?

Hi dear Sir fishiemnma, remove the broken LCD display lifting it up carefully of retention plate.You did not make? will you have access to the connector afterwards.Regards ... Nikon Coolpix S3000 Digital Camera

I received a Canon PowerShot SD870IS Digital ELPH as a present for Christmas. Unfortunately, my apartment caught fire three weeks ago. My Camera was in its case. the case is burnt on the outside and the camera looked dirty on the outside. It seems to be working but I am just worried that there might be some more damage in the inside. Shall I send it to Canon for an overhaul? What do you suggest? I cleaned the outside but I am still not sure. Please help!

Hi,If it is not under warranty and the camera is working good and your not facing any problems then i believe that you don't need to send it for a service.If it is still under warranty then please go ahead.The service will be free o ... Digital Cameras

As I was putting my beautiful camera back into the case, the camera switched on and I think there may be a problem with the zoom as it seems to do a little dance. I believe the lens slid out and pressed against the case before I was able to get the camera turned off.

Oh that sounds like you may have striped the drive gear that moves the lens back and forth if it jumped a tooth then its now out of focas and will keep trying to fine it by moving in and out by its self i would say the only way is drop it into the sh ... Panasonic Lumix DMC-ZS3 Digital Camera

Lens Jam My G6 turned on accidentally in its case and the lens tried to extend but was forced to stop. Now, when I turn the camera on, the lens makes a ratcheting sound and gets halfway before stopping. It beeps and says "LENS" on the top LCD screen, before powering off. I've been quoted £160 just to have it looked at which is half the value of the camera! Does any one know how to open one of these up (safely) and what to do when you get inside to fix the problem?! Many thanks

Did u ever get this problem sorted, as I am having the same issue now. But mine just did it one day after turning it on ... Canon PowerShot G6 Digital Camera

LENS ERROR I have a Lens Error which indicates it will turn the power off. I took the camera apart and found a stripped gear. My problem is getting it back together as i dont have a service manual or diagram and cant remember how to get it back together.

It is difficult to put back the lens assembly if you don't have any experience....you may damage the gear and the flexwire if you not properly align the lens...since you already open the lens try to not damage the gear and flexwire...dont' apply some ... Canon PowerShot A530 Digital Camera

I dropped my son's camara under my car and it was in the camara case, But it rain all night. When Iwent to get it the case was wet and the camara less is foggie but the camara turn on and off what do I need to doto take off the fogg and aslo I'am affarid to plug it and charge it. Please help me what to so. The amamar is a Sony Digital Camara.

Leave it in a dry environment for a few days until everything dries. I'm afraid the camera is permanently damaged if the rain has salt or chemical content. Hopefully it doesn't and it's just a matter of drying out. ... Digital Cameras

What's your problem?hello how do I get my vivicam vivitar camera out of macro mode it says my card is full but this is not the case. I can't take any pictures can you help

There's a switch on the end of the camera near the USB slot. Slide it away from the flower position to take it out of macro mode.As for the memory card, what size is it? Have you formatted it? ... Vivitar ViviCam 8025 Digital Camera

Won't work Have a C875 for a year now, and it has been working just fine. The other day I decided to try a AC adapter on it. Well, the AC adapter I used is one of those variable voltage ones. I set the voltage for 3 volts, plugged it in, it doesn't work. O.K. I put the batteries back in, still don't work. And, to top it off, the batteries get hot. Took the camera apart and I don't see anything burned up. Lost. Any help on what the solution could be and how to fix it would be greatly appreciated.

Oh no maybe you used different adaptor some adaptor have reverse polarity. check the adaptor before plugging it..if you using variable voltage set to 3v then adjust also the polarity. the polarity should match the polarity of your camera. ... Kodak EasyShare C875 Digital Camera

Lense Issue When I turn on the camera the lense started to move out and then got stuck. How when you turn it on it just trys to adjust the lense but again it is stuck. I am required to remove the batteries to get it to shut off. I was going ot open the case but three of the screws requires a nice special allen wrench, but guess what, they did not provide it. Any ideas where I can score one?

Does the screw you need to remove look like a triangle with 3 points? if it does i had the same problem! went to all kinds of repair stores looking for one, turns out that is a manufacturer only tool so that we cant repair them and we have to have th ... Fuji FinePix S3000 Digital Camera

Hey guys I keep getting the error; remove lens cap and push I> button I dropped the camera after tripping over the tripod. (The lens housing hit the concrete and its been no go since then) Ive read your recommendations that the lens will have to come off and as my warranty doesnt cover accidental damage Im thinking of takin it apart tonite, what do you think?

If you don't want to pay for the (expensive) repair, then stripping it down and checking that the lens motor, cogs and housing and moving correctly. It's not for the faint-hearted, but it's not really complicated… the Instructable for the FZ5 ... Panasonic Lumix DMC-FZ8 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1237 seconds