Having problems with your Canon PowerShot A75 Digital Camera ?

Func Button Not Functioning


\015 Hi,\015\012\015\012Recently I purchased CANON POWERSHOT A75 camera. All of Sudden FUNC button is not working. Can any one help me in this. I am not sure if I have selected some option which is not allowing the FUNC button to work.\015\012\015\012Thanks & Regards,\015

Answers :

Try rotating the selection knob from Auto to the P or Manual position. Then press the Function Button.\015\012\015\012Next would be to install fresh or recharged batteries.\015\012\015\012Next would be to try a different Compact Flash card.\015\012\015\012Check the Owners Manual and see if there is a reset function mentioned.\015\012\015\012I checked a Canon forum and found nothing about a problem with the Function Switch.\015\012\015\012Your camera is likely still under warranty, it may be time to check with Canon.
Repair Help & Product Troubleshooting for Canon PowerShot A75 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Func Button Not Functioning


Try rotating the selection knob from Auto to the P or Manual position. Then press the Function Button.\015\012\015\012Next would be to install fresh or recharged batteries.\015\012\015\012Next would be to try a different Compact Flash card.\015\012\0 ... Canon PowerShot A75 Digital Camera

I have the Canon Powershot SD1200 IS. the functions: Disp., Menu, Func. Set do not work. nothing happens when i press them. When I hit the play button it keeps going through all my photos very quickly. and the 2nd green light blinks quickly. Not one by one manually. It doesnt matter if the camera is on auto or camera. nothing works. On the digital screen on the botton left there is a symbol of a rounded triangle with an S and bottom right there is 9999 when i change it to manual on the upper lef


Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

Canon SD900 selection options not responsive. The selector wheel, Function Set button and menu selector only work from time to time. Even if pressing the ring brings up info to the LCD, nothing can be changed because the Function Button and the Menu button are not active. This is a random problem. Sometime, I can bring all functions back to life by removing and re-inserting the battery and restarting.


Sounds like the board has become damp and possibly corroded in certain parts this causing the random effect with the buttons their isnt much you can do unless you can remove the case yourself and give it a good clean but doing this is extremely diffi ... Digital Cameras

The function button on my d40x i think is sticking because when i turn my camera on the self timer keeps flashing and when i try to access the menu or any other functions like playback it wont allow me the only thing i can think is that the function button by the lens is sticking hints the reason it is flashing and wont stop is there a way to fix this?


Since you can't get into the menu, let's try a manual reset. Remove the card and the battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Nikon D40x Digital Camera

I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac


I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras

"function" button Can anyone tell me what the "function" button does? So far, it activates nothing. I am assuming that it works if hooked to computer via serial/parallel cable. (I do not have the cable or manual) Am I correct? Also, how does one move the pointer that is in the top window? How does this camera do in regard to battery usage?


The main thing I have found the function button to be used for is to be able to set the exposure compensation.\015\012Most of the rest of the controls are done with the ESC and SEL buttons.\015\012\015\012If after you look at the links for the manual ... Epson PhotoPC 750Z Digital Camera

Camera: Canon Power Shot A85 Problem: Menu Button, Function Button and Omni Selector are not functionning. Everything else is fine.


Check the battery life ,remove the battery for some then put it back check the battery life and see if u can change attime this affects the menu keys,if the problem contines let me knw ... Digital Cameras

Hi. I have a Koday EasyShare DX 7440--lens opens and most buttons function, but shutter appears stuck open. Shutter button will not depress and zoom will not function. All else is operable.


... Kodak EasyShare LS443 Digital Camera

In custom setting, assigned the front function button to display framing grid. function button does not respond when pressed. am i missing something here? thanks


Aha! While pressing the fn button, turn the main command dial (the one on the back) to toggle the grid display.Personally, I like having the grid, and used custom setting #D2 to turn it on the first day I had the D90. This frees the fn bu ... Nikon D90 Digital Camera with 18-200mm lens

My ViviCam T328 shutter function will not work properly. There are 2 functions to the shutter button: The pre-focus and the actual shutter function that takes the picture. Every time the pre-focus is pressed, the camera will take the picture immediately without focusing at all. And the other function does nothing at all when pressed.


Does it act this way when you set the camera to other modes? ... Vivitar ViviCam T328 Digital Camera

Dv 5500 i have a dv5500 digital camera since new i have had a problem with the ok button when i try to advance picture display the button performs a different function only when i press the right sideof the button left side top and bottum work fine camera seems complicated to set features such as flash at night could not figure that out any help would be appreciated can i send the camera some where in newengland area usa for repair [email protected] jerry fasciano 94 nichols st everett,ma 02149


You need to replace the button board in your camera. Regards ... Mustek DV5500 Digital Camera

The right function button on the Omni Selector has ceased to function. All other i.e. up, down & left is functioning properly


Your best option is to have the camera repaired by an an authorized service center. You can start the repair process here: ... Canon PowerShot S3 IS Digital Camera

All functions of the camera do not work. The camera still takes still pictures. The four buttons near the screen, the four way switch, the telephoto lever and the two buttons near the on/off button do nothing at all.


... Kodak EasyShare Z950 Digital Camera

Lost functionality Camera is about a year old. Suddenly, zoom doesn't work, Set button doesn't work and Display button doesn't work. Other than that, it takes pics and displays them. But without the Set button, I can't change settings. Any ideas?


I have the same problem.. happened after leaving it uncharged for more then a year. I think its a software problem.\015\012someone know how to do hard reset/reboot? ... Casio Exilim EX-Z750 Digital Camera

Coolpix L5 was functioning perfectly until today. Now it boots normally, focuses normally when the shutter button is partially pressed, but does nothing when the button is pushed all the way down. It will not shoot stills or video or even self-time a still shot. It behaves exactly as if the actual shutter release button is broken and doesn't make contact at the full pressed position. New batteries, memory card, resetting default menu settings--none of these help. It's running firmware 1.0.


ARe you sure that it is not stuck in playback mode? \015\012Here is a list of firmware and yours is not listed:\015\012 ... Nikon COOLPIX L5 Digital Camera

Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.


Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera

Function buttons all pop flash


Sorry sounds like this is a hardware problem and you need to have your unit serviced. ... Nikon D80 Digital Camera with 18-200mm Lens

DSC-W90 GOT WET AND NOW POWER BUTTON DOES NOT FUNCTION BUT CAMERA TURNS ON WHEN YOU PUSH THE MENUE BUTTON!!


It got wet and you are asking for help to fix it? maybe go to a nearby swimming pool, dunk it there for five hours and see if it works. ... Sony Cyber-shot DSC-W90 Digital Camera

Canon Powershot SX110 IS Digital camera function button stopped working!


... Canon Powershot SX110 IS Digital Camera 9.0MP

Buttons do not function on my d80


Some of those buttins work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.\015\012\015\012If this is not the issue, please describe specifically which b ... Nikon D80 Body Only Digital Camera

I have a canon camara powershot A590 Is and the following functions do not work: 1. it will not zoom 2. the menu button will not activate 3. you can not review the pictures taken 4.none of the functions work the only thing you can do is take the pictures


Is this a new camera? If yes then you can avail the warranty by bringing it to an authorized service center to save repair cost. If its out of warranty, then for the zoom problem, make sure you installed fresh/new batteries. If the problem is still ... Digital Cameras

Panasonic NV-DS27EG problem: sudden degradation in function following (though could be coincidence) first ever use of DV-out socket on camera (to connect Dv-in on Panasonic DVD recorder). First symptom: no picture displayed when attempting to play back a tape in VCR mode. Second symptom: power light stayed on even when camera switch was at the off position. Third symptom: message in viewfinder asking for the reset button to be pressed. Found and pressed reset button then: Fourth symptom: "to ser


... Panasonic Digital Cameras

My present White Balance won't Work on my D80. When I press and hold the buttons, nothing happens. The buttons work independently on other functions, just not this one. Thanks!!


Note That you must keep the WB button pressed with your left thumb while you move the main front-right dial with your right thumb if you are trying to use the WB button. Pressing WB once will not change the WB settings.\015\012\015\012An ... Nikon D80 Digital Camera

KEY LOCKED??!! my canon A530 got this problem that seems like a key lock of somehow.. it tells me to reset the date and time, however none of the buttons are functioning at all. i can still take pictures, but i just can not view them at all. i can do any zooming or change mode as the buttons seems like it's "locked". can someone please help me out?


My cannon A530 the card said locked ... Canon PowerShot A530 Digital Camera

I have a Canon WP-DC16 underwater housing for my A-720IS. I keep having the same problem, at any depht, of the functions buttons not working. The housing is clean, buttons don't stick. All others work. Could the O-ring for the back door swell with use of silicon grease? I changed the O-ring; still does it... Please; HELP!!!!!!!!!!!!!!!!


... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0912 seconds