Having problems with your Canon PowerShot A80 Digital Camera ?
Blurness of the LCD of my Canon A80 Camera
\015 The LCD of my digital camera suddenly goes blurred. I do not see any image on the LCD when trying to shoot a photograph. I only see some funny pinkish colors with a bar-chart kind of graph on and when the picture is taken and I took it to the laboratory for processing, I do not see anything except the colors. What could be wrong? I heard this could be due to climatic changes but I doubt it. Does anyone have a clue what could have gone wrong and how I can fix it?\015
This is a defective CCD known to Canon. They will repair it FREE of charge. Go here for more detail: http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=223&modelid=8044&keycode=2112&id=29819
Repair Help & Product Troubleshooting for Canon PowerShot A80 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Lcd blurred I have a canon power shot a80 and when i turn it on and try to take a picture, on the LCD display i see a mixture of colour which is not even letting me see the image of the picture i would like to take. If i look through the lens and take the image, i am still able to view the picture I had taken if i set the camera on the view pictures. The mixture of colours on the LCD only shows when the camera is set on take the picture... and it doesn't even do it always. Thanks.
Canon will fix this camera if it is in the list of ccd defect. Contact canon.com for the Americas, or where you are. Call Service on the web page with the 800 number.http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&am ... Canon PowerShot A80 Digital Camera
Blurness of the LCD of my Canon A80 Camera
This is a defective CCD known to Canon. They will repair it FREE of charge. Go here for more detail: http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=223&modelid=8044&keycode=2112&id=29819 ... Canon PowerShot A80 Digital Camera
Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.
Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera
Canon SD1000 blurred pictures and blurred LCD, Camera wont focus! please help ive had it for 2 weeks
The best chance to use your SD1000 is to set to picture, push ISO (on top of the func. set ring) and set to hi. This works pretty well. Do not bother sending any camera to Canon, they charge the "standard charge" plus for all their manufacturing pr ... Canon PowerShot SD1000 Digital Camera
Canon powershot sd110 lcd is blurred - Canon PowerShot A75 Digital Camera
Please see the following comment: ... Canon PowerShot A75 Digital Camera
LCD PICTURE IS PINK AND WHITE LINES (BLURRED ) IMMAIGE.Please give detail postal address of service station of Canon camera Powershot A95 model,purchased in June 2006 Pune,Maharashtra,India SUNIL SAPKAL [email protected]
Hi Sunil. The problem with your Canon A95 is quite common on cameras of 4 or 5 years ago. The repair is quite expensive, as the main imaging chip (CCD) has absorbed some moisture over time. There is more in-depth information here: ... Canon PowerShot A95 Digital Camera
All of a sudden i can't see anything through my viewfinder on my canon 5d (not Mark II) even when I look at a bright light (then it is only a dim blur). It does take photos which appear on the LCD, but I cannot see what I am shooting. Does anyone know if I hit something by mistake or a solution to this problem? Please advise as I am traveling and need my camera to operate correctly. Many thanks, Mia
Do you find that if you slightly loosen your lens you hear a click or something releasing. Then when you lock the lens back into place u can see through the view finder, but only for 1 photo. Then it stays black again? ... Canon EOS-5D 12.8 Megapixel SLR Digital Camera w/ EF 24-70mm Zoom Telephoto EF 70-200mm f/ Autofocus L
Canon Ixus v2- LCD screen all blurred and streaky-predominately blue? What causes this? Is the camera stuffed? cheers
If you can see an image, then maybe the ribbon that connects the lcd to the camera came loose some how. If you see nothing them maybe the lcd is damaged. If it is still under warranty then contact canon, if it is no longer under warranty, you can t ... Canon IXUS V2 Digital Camera
Blurry pictures My canon Powershot A95 digital camera is taking very blurry shots. At first i thought it was the LCD but the old pics taken are viewing fine, the ones I take now are all blurred. I think maybe it has something to do with the lense.
Wipe off the lense with a clothe or something, that might be the problem. Or if you move the cam too much when you are trying to take a pic, that also mighht be the problem. If not, I have no idea. ... Canon IXUS V2 Digital Camera
When using camera Canon Powershot A85 once pic is taken the lcd screen just shows blurs of what may have been taken.
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A85 Digital Camera
Hallo, my canon powershot A420 camera shows horizontal white lines in LCD screen mostly in night shots and the day light shots appear blurred as if more light is entering and the image is not clear.
I am afraid this seems to be a hardware error in the sensor. If the image is purplish in color when blurred it is similar to my and another user's problem. He/she contacted the manufacturer and they said they can fix it for $250. I am not a repair s ... Canon PowerShot A420 Digital Camera
Canon Powershot A75 blurred LCD display
It sounds like the focus element in your lens is not functioning properly. Does the lens retract completely when you turn off the camera?\015\012\015\012When you push the button does the camera attempt to focus the image? If you do not see any change ... Canon PowerShot A75 Digital Camera
Canon a80 camera
It seems that either the image sensor or the connection between the image sensor and the processing board has been damaged or was improperly installed. If you sent it in because the lens was jammed it is highly likely that this is what has happened. ... Canon PowerShot A80 Digital Camera
Canon Powershot A80 LCD problem
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot A80 Digital Camera
I own a canon powershot S3 is and I am getting this strange E24 error where in the camera lense would comes out and just goes in . Another interesting thing I observed is when the LCD is on and I am in the image display mode (That is browsing the existing images) then there is no problem if the LCD panel is open or closed the camera just seem to respond normally, only when I change to the shooting mode the camera lense would come out and go in with the camera shutting down. what is problem with
It sounds like it needs to be serviced. If you're out of warranty, then go to this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they ... Canon PowerShot S3 IS Digital Camera
I have verified my Canon A95 drains batteries by doing an amperage test. Starting with new batteries I install them in the camera and then layer a thin copper wire then piece of paper then copper wire and close the battery door. Touching the wires together closes the circuit and the camera functions. With the wires appart I measure the camera amps. The camera measures 0.6 amps when on and 0.14 amps when off. Doing the same test with my A80 Canon yeilds 0.45 amos when on and zero amps when off. T
I assume you're using a CF type 1 card. Some CF cards have been known to drain batteries. As an experiment, remove the card and see if the batteries drain at the same rate. ... Canon PowerShot A95 Digital Camera
Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.
Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera
Cracked LCD on Canon PowerShot A510. A few weeks back, I noticed that my LCD view screen was cracked on my camera. The camera still functions since I use the other view finder anyway. However, I obviously cannot read any type of menu without a function LCD screen. What next?
Your best option is buy a junk one off ebay and replace LCD. LCD replacement is very straight forward, just remove the screws, pry the case apart and the rest will be easy. Use the one you buy off ebay and practice getting it apart. ... Canon PowerShot A510 Digital Camera
My Canon SX210 IS is brand new. Just bought it on yesterday. The problem I'm having is that the LCD screen does not look sharp and clear when focusing on a subject. It looks grainy. Can you tell me if I need to adjust the settings on the camera? I was indoors in low lighting, but I've never seen the LCD look this way on a camera. The LCD is always clear and sharp when focusing.
Some cameras display a grainy picture in low light. Do you have the camera set to the highest number of megapixels and fine image or do you have it set to a lower resolution to get more pictures on the card? ... Canon PowerShot SX210 IS Digital Camera
My LCD screen on my Canon Power shot G3 is blank (just white). There are no icons; no viewing of things I wish to photograph. I called customer support they said there was no problem with the CCD image sensor on G series cameras per the Canon service letter of 10/6/05.I would have to pay about $135 plus shipping to get it fixed or trade for another camera which would cost me money also. I'm not happy with this because I assumed that Canon would fix the problem if it appeared on the G series. Ple
If the CCD were bad and everything else OK, you would see all the icons on the LCD (viewing screen), and you would be able to see images on the memory card that had been taken in the past while in Replay mode. The service letter you refer to covers r ... Canon Digital Cameras
Canon Power Shot A80 LCD screen not working.
\015\012\015\012 \015\012\015\012http://www.fixya.com/support/r1237608-canon_powers ... Canon PowerShot A80 Digital Camera
Have canon Powershot A75 3.2 Mega pixel camera .. Now it is having display issue. Once i open my camera lens come out power come but unable to see the image in lcd to shoot.. Can you assist
First try pressing the DISPLAY button. If that doesn't fix it then this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty st ... Canon PowerShot A75 Digital Camera
How can I fix this issue with the camera, on the canon powershot sd750 digital elph 7.1..lcd reads lens error restart camera
Try these procedures. ... Canon PowerShot SD550 / IXUS 750 Digital Camera
Memory Card Locked The card works fine in my other Canon Camera, but not in my A620. I've switched out the cards and nothing works in my A620, but they all work in my other Canon. Memory Card Locked is all I get in the 620 and nothing works on camera. Lens comes out and the LCD screen lights up, but that is it. Any help would be appreciated. Jeff
I'm assuming the slide switch on the side of the card is in the correct position. In order for a card to work in a particular camera, it must first be formatted in that camera. This completely erases it so download any pictures still on it to your co ... Digital Cameras
Canon Powershot A610 digital camera--LCD screen shows icons, but otherwise is blank--there is no visible movement in the lens when I take a picture without flash--have tried setting it on TV setting and taking a picture, then opening the battery cover for a few seconds after waiting 7 seconds or so, but no images on the LCD except the camera's icons--ideas? probably a stuck shutter, or is it still possibly the CCD sensor even though there's no visible movement in the lens? Ideas? Thanks!
Much more likely that it's a stuck shutter, especially for your model camera. How many tries did you give the fix? Some people stated that it took at least 15 repeated tries before the shutter opened:\015\012\015\012\015\012 ... Canon PowerShot A610 Digital Camera