Having problems with your Canon PowerShot A80 Digital Camera ?

Canon Poweshot A80

\015 Hello, I seem to have a prob with my camera, When camera is turnen on it all works fine, i try to take a picture but cannot see the view from the Lcd. When i have taken a picture, i can view it through the lcd and display all previous pics through the lcd, and on one setting the lcd works when you want to take a picture, but on all the other modes it doesn't. Any suggestions?? Hope it make sense\015

Answers :

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:
\015\012
\015\012http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
\015\012
\015\012http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
\015\012
\015\012Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500
Repair Help & Product Troubleshooting for Canon PowerShot A80 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon Poweshot A80


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot A80 Digital Camera

Canon a80 dear hi,      hope u all r well. please help me to solve the problem for the canon powershot a80 which suddenly got dead.when i press the power switch it takes around 150 ma of current till i keep power button pressed.no light comes on.After releasing thepower button the current goes down to zero.      please help me.i m an electronic technician.this is my personal camera.thanks my email  [email protected]


Here are some simple things to try first for a camera that won't power on:\015\012http://camerarepair.blogspot.com/200 ... Canon PowerShot A80 Digital Camera

Canon A80 My computer isn't recognizing my Canon A80 all of a sudden. What exact site do I need to download so that it will recognize again?


Reinstall your camera software or check you system information tool. The driver maybe on your system and just needs to be reinstalled. If you don;t have your camera software, you can probably download it from the manufacturer's website. ... Canon PowerShot SD1000 Digital Camera

Battery Problems CANON A80 Battery Problems Have had a CANON A80 for nearly three years. The first two years were great. The batteries would last for ages between charges, and with a new baby we took lots of photos. Then the batteries started playing up. Fully charged batteries would only last a few days, or if left would not power up at all. Have replaced the batteries, and the chargers with no improvement. Here in NZ there is a huge wait for repairs, so if it is beyond repair I?ll just re


Buying new set of batteries wont help.This problem is often in A80. ... Canon PowerShot A80 Digital Camera

Naming error, Canon poweshot A460 - Canon PowerShot A530 Digital Camera


I had the same problem to my camera, this is what I did.\015\012go to menu, set up, format, format memory card?, yes ... Canon PowerShot A530 Digital Camera

I have verified my Canon A95 drains batteries by doing an amperage test. Starting with new batteries I install them in the camera and then layer a thin copper wire then piece of paper then copper wire and close the battery door. Touching the wires together closes the circuit and the camera functions. With the wires appart I measure the camera amps. The camera measures 0.6 amps when on and 0.14 amps when off. Doing the same test with my A80 Canon yeilds 0.45 amos when on and zero amps when off. T


I assume you're using a CF type 1 card. Some CF cards have been known to drain batteries. As an experiment, remove the card and see if the batteries drain at the same rate. ... Canon PowerShot A95 Digital Camera

Powershot a80 does not turn on - Canon PowerShot A80 Digital Camera


Things to check first are battery contact points, and micro switches that are located on the battery and memory card doors. Details on what needs to be checked ... Canon PowerShot A80 Digital Camera

Card locked error on Canon PoweShot SD 300 - Canon PowerShot SD300 / IXUS 40 Digital Camera


There are several possible causes for "memory card locked", "memory card error", or "no memory card". Some include trying to use of a 4GB SDHC card with an older camera made before SDHC format came out. Others include problems with the switch on the ... Canon PowerShot SD300 / IXUS 40 Digital Camera

Canon powershot sd400 error code E18 - Canon PowerShot A80 Digital Camera


Yes !! I wacked it a couple of times on a hard surface and it started working again after I dropped it and got the dreaded E18 error mesage in the middle of a Jewelry shoot. wm ... Canon PowerShot A80 Digital Camera

My Canon Power Shot A80 Digital camera goes ON but only shows the screen name Canon then the lens goes back into off - some sounds come on and then E18 shows in the lower left of a black screen. Help.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A80 Digital Camera

Canon A80 CCD problem or something else?


Open the camera, look at the Flat-cable going from the CCD to the 'camera HW', there is a small connector where the latch mecanism is open,-meaning it does not put pressure on the commenctors and if you touch the flat-cable you can see the flicker/li ... Canon PowerShot A80 Digital Camera

Windows Vista does not recognize Canon PowerShot A80


Vista requires updated drivers for most of the older cameras. Unfortunately, Canon chose not to update the drivers for many of these cameras, including the A80. BUT please see the following blog article, as it describes the use of a card reader as ... Canon PowerShot A80 Digital Camera

Canon A80 camera-red tint and horozontlal lines on pictures


I had the same thing happen to me last November. Canon has a recall of sorts on a wide range of older cameras. Apparently there is an issue with the sensor. Canon will fix the camera free under this recall program.\015\012\015\012Here is ... Canon PowerShot A80 Digital Camera

Canon PowerShot A80 - no display through the lens


See this link. The symptoms indicate that your CCD (image sensor) f ... Canon PowerShot A80 Digital Camera

My Canon powershot a80 will not come on.


Take a look inside your camera's CF card slot. I suspect that you may have a bent pin in there. If so, don't fret. Although professional repair would be more costly than the value of the camera, there is a very good chance that you can repair this yo ... Canon PowerShot A80 Digital Camera

Canon Powershot A80 NO CAMERA FOUND message when downloading.


I know this issue occurred with me when I had a service not running for WinXP OS. If you are using WinXP, check for this service, start it before connecting the camera and switching it on.\015\012\015\012Canon Camera Access Library 8 ... Canon PowerShot A80 Digital Camera

Canon Poweshot A300


This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: ... Canon PowerShot A300 Digital Camera

Canon Powershot A80 LCD problem


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot A80 Digital Camera

Blurry picture on Canon A80


I don't know what you told that technician, but try this. Download some of your pictures and videos to your computer. If the downloaded pictures look fine on your computer, then the technician was right, and it's probably just a loose LCD ribbon ca ... Canon PowerShot A80 Digital Camera

Canon a80 camera


It seems that either the image sensor or the connection between the image sensor and the processing board has been damaged or was improperly installed. If you sent it in because the lens was jammed it is highly likely that this is what has happened. ... Canon PowerShot A80 Digital Camera

CANON pOWESHOT S1 : BLACK SCREEN WITH PURPLE LINES ( BOTH SCREEN)


Yes they will. If you are still living in Canada, or in USA, call 1-800-OK-CANON to arrange free repair. ... Canon PowerShot S2 IS Digital Camera

Canon A80 Autofocus


This might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\012\015\0 ... Canon PowerShot A80 Digital Camera

Service manual needed for canon PoweShot S30


This isn't exactly a service manual, but something I had prepared for a friend who had a similar problem as you. Would recommend instead of fitting a new switch to replace the entier assembly. You can get broken S30's from ebay relatively cheap. A ... Canon PowerShot S30 Digital Camera

Canon Power Shot A80 LCD screen not working.


\015\012\015\012 \015\012\015\012http://www.fixya.com/support/r1237608-canon_powers ... Canon PowerShot A80 Digital Camera

Lcd the lcd of my canon poweshot s100 digital isnt working, i dont know what happen, all of a sudden when i push the camera button , no image can be seen


Did you accidentally hit the "DISPLAY" or "DISP" button on the back? ... Canon PowerShot S100 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0774 seconds