Having problems with your Canon PowerShot A85 Digital Camera ?

No image on LCD of Canon A520

\015 When the camera is on, everything is on the display window, except any image view. When taking pictures, can hear the shutter sound, but the picture is just blank.\015

Answers :

2 possibilities,
Either CCD Imager is defective and does not produce image signal Or IRIS / Aperture is stuck in lens assembly. In both cases qualified camera tech can fix it.

Repair Help & Product Troubleshooting for Canon PowerShot A85 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No image on LCD of Canon A520


2 possibilities,Either CCD Imager is defective and does not produce image signal Or IRIS / Aperture is stuck in lens assembly. In both cases qualified camera tech can fix it. ... Canon PowerShot A85 Digital Camera

Is there anything I can do to the LCD monitor to show an image (like it used to) on a Canon Powershot A520?


Moove the slide on your memory card ... Canon PowerShot A520 Digital Camera

Lcd blurred I have a canon power shot a80 and when i turn it on and try to take a picture, on the LCD display i see a mixture of colour which is not even letting me see the image of the picture i would like to take. If i look through the lens and take the image, i am still able to view the picture I had taken if i set the camera on the view pictures. The mixture of colours on the LCD only shows when the camera is set on take the picture... and it doesn't even do it always. Thanks.


Canon will fix this camera if it is in the list of ccd defect. Contact canon.com for the Americas, or where you are. Call Service on the web page with the 800 number.http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&am ... Canon PowerShot A80 Digital Camera

Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.


Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera

I have a canon sd 750 have been using it for 4 months now, but yesterday the screen went black i can see the old picturs i took but cant take any new pictures all the new pictures i take are black the LCD is gone black the lense is moving but no image on the LCD i can see the menu and settings but no image from the lense


OK, SORRY I DIDN'T KNOW WHAT KIND OF MEMORY YOU HAD IN THE CAMERA. I WAS HOPING THAT WE MIGHT HAVE A SIMPLE PROBLEM FOR YOUR SAKE AND WE COULD GET YOUR CAMERA UP AND RUNNING FOR YOU AGAIN. NOW, IT SOUNDS LIKE YOU NEED A PROFESSIONAL TO TAKE A LOOK AT ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I own a canon powershot S3 is and I am getting this strange E24 error where in the camera lense would comes out and just goes in . Another interesting thing I observed is when the LCD is on and I am in the image display mode (That is browsing the existing images) then there is no problem if the LCD panel is open or closed the camera just seem to respond normally, only when I change to the shooting mode the camera lense would come out and go in with the camera shutting down. what is problem with


It sounds like it needs to be serviced. If you're out of warranty, then go to this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they ... Canon PowerShot S3 IS Digital Camera

Image quality Hi. When I'm taking photos and set my exposure manually on my Canon 20D, the image looks right exposed on my LCD screen, but when I download all the photos on my PC, all the photos are VERY DARK. This takes lots of time for me to edit it and then after I've got the right brightness on my PC I discovered that the image quality is VERY BAD!!! There is lots of noise on the image. Can someone help me to find a solution to correct the exposure on my camera, so that I can save time on my


Hello there,\015\012\015\012If you are correctly metering the exposure of your photos, and you suspect it may be the camera, try resetting the camera to its default settings using the menu. Clearing all the custom functions as well can sometime ... Canon EOS-20D Digital Camera

Canon ixus i7. LCD screen is cracked, and thus does not sdisplay any image, however the camera still zooms, takes pictures, etc Obviously now viewfinder so only way to see what your taking pic of is through the cracked LCD.(whic you can;t as it is pure white with black leak lines of the crack. I assume its a simple replace of the LCD screen which i would assume connects like any standard LCD screen using a ribbon cable?


I know some canon LCDs can be replaced by the user. Canon will sell you the specific part or you can find them on ebay. The LCD ribbon cable can be easily pulled out and with a little fiddling a new one can be put in. I have not personally done it wi ... Digital Cameras

Flickering image on LCD lens of my Canon S410


By the sounds of it you have a bad chip on your camera system board. If the image records okay and displays okay after the image is recorded. Other than having your camera repaired you may have to use your camera as is. ... Canon PowerShot S410 / IXUS 430 Digital Camera

Lcd panel I've just bought a new canon eos 350d and the lcd panel will not show the image of what I am taking a picture of. I can take a picture, and display it back on the lcd panel but just not display what is in the viewfinder when I want to take a photo. Have I got a setting wrong somewhere or is the camera faulty? thank you!


SLR's don't show what your seeing through the view finder on the LCD. That is a function on point and shoot cameras, not on SLR's. ... Canon EOS 30D Body Only Digital Camera

NO IMAGE WHEN I TAKE A PICTURE WITH BRAND NEW CANON EOS 400D CAMERA NO IMAGE APPEARS AND IT SAYS ON THE LCD SCREEN NO IMAGE - WHAT MIGHT THE PROBLEM BE - FAULTY CF CARD?


Check the card with your PC and see if you can write to it. Also format the card with your PC, then see if it works. I've had the same problem before and it was the C/.F card. ... Canon EOS 400D / Rebel XTi Digital Camera

LCD Display I haven't used my canon for a while - I've just turned it on and though the LCD display works to show pictures I've taken and the settings screen - I can't see anything in it when I take a picture (it's just black) when I press the Disp button it just switches from a black screen to the settings screen - please tell me what I can do so that I can see the image in the LCD before I take the picure. Thanks for your help


As far as I am aware, the 400D doesn't have a live preview mode.What you are describing is perfectly normal and is how 99% of digital SLR cameras behave.Are you sure it used to do this?Matt ... Canon EOS 400D / Rebel XTi Digital Camera

Recently, my Canon Powershot A95 has had an intermittent LCD display problem. While beginning to frame and focus a shot, the image streaks from edge to edge of the screen. If the shutter is snapped, that is the image recorded. The image looks like the subject is rapidly moving, or as though it is a time-lapse photo. Could this be a CCD (chip)issue?


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera

I have a Canon Powershot 5S IS. The image on the LCD screen is not rotating when I rotate the screen, and when I snap the screen into place with the LCD side out it goes from displaying on the LCD to displaying on the viewfinder. It was working properly before, but I can't figure out how to get it back to those settings.


On camera menu, turn on Reverse Disp. ... Digital Cameras

My LCD screen on my Canon Power shot G3 is blank (just white). There are no icons; no viewing of things I wish to photograph. I called customer support they said there was no problem with the CCD image sensor on G series cameras per the Canon service letter of 10/6/05.I would have to pay about $135 plus shipping to get it fixed or trade for another camera which would cost me money also. I'm not happy with this because I assumed that Canon would fix the problem if it appeared on the G series. Ple


If the CCD were bad and everything else OK, you would see all the icons on the LCD (viewing screen), and you would be able to see images on the memory card that had been taken in the past while in Replay mode. The service letter you refer to covers r ... Canon Digital Cameras

Canon s45 no image to lcd from lense


I have the same problem I went to the canon service department and they told me that its a common problem and the image sensor has to be change it will cost me 160.00 depending on the area where I'm getting it done so for me it's better to buy a new ... Canon PowerShot S45 Digital Camera

Canon A75 no images on LCD when shooting


Possibly the same problem I just had with my A75 (and shared with another post here).Below\015\012 the LCD are two buttons (versus four on the A70). The button\015\012 on the left is the Print/Share button, w ... Canon PowerShot A75 Digital Camera

Canon A60: Grainy pictures, jumpy lcd screen image


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot A60 Digital Camera

Canon A430, no display at LCD & black image only


... Digital Cameras

Have canon Powershot A75 3.2 Mega pixel camera .. Now it is having display issue. Once i open my camera lens come out power come but unable to see the image in lcd to shoot.. Can you assist


First try pressing the DISPLAY button. If that doesn't fix it then this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty st ... Canon PowerShot A75 Digital Camera

Distorted image on LCD is what I get in the photo. I got a Canon IXUS400 and the LCD display is blurry and the picture is also blurry. I got of the plane and turned on my camera and saw this. Not sue of the exact cause?


Canon has recognized that the IXUS400\\S400 camera had two manufacturing defects. One is a memory card error and the other is the CCD image sensor which can cause the LCD screen to act dysfunctional. Contact Canon. They will fix these issues for free ... Canon PowerShot S400 / IXUS 400 Digital Camera

Canon Powershot A610 digital camera--LCD screen shows icons, but otherwise is blank--there is no visible movement in the lens when I take a picture without flash--have tried setting it on TV setting and taking a picture, then opening the battery cover for a few seconds after waiting 7 seconds or so, but no images on the LCD except the camera's icons--ideas? probably a stuck shutter, or is it still possibly the CCD sensor even though there's no visible movement in the lens? Ideas? Thanks!


Much more likely that it's a stuck shutter, especially for your model camera. How many tries did you give the fix? Some people stated that it took at least 15 repeated tries before the shutter opened:\015\012\015\012\015\012 ... Canon PowerShot A610 Digital Camera

Nchatta Hello, My Canon s45 was working perfectly until it was dropped from a very very small heigh in a soft leather case with protection. The camera works in the sense that it can read and display the images from the SD card perfectly, the lense extends but you cannot see anything on the LCD when wanting to take a picture bar a white box in the middle that usually turns green once focussed (but now doesn't.) The screen is just black. The shutter clicks, takes the picture, but just a black LCD


It seems like if u see icons on lcd then sorry to tell u i think ur CCD is gone it seems like , but to make it sure first get the lens checked but iam pretty sure abt the CCD bcoz it is risky in impacts and jerks ... Canon PowerShot S45 Digital Camera

Canon 350d just bought 2nd hand canon 350d. should the lcd screen be showing the subject of photograph while focusing. as it is i only see image during 2second display after photo has been taken. i need to know and if so,how to set it right. Thanks Alan C


No, the so called 'live view' ( seeing pictures in real time on your LCD monitor ) is available only on the latest models that are coming out now ( Canon D40 and Nikon D3 and D300 have this feature ). ... Canon Rebel XT / EOS 350D Digital Camera

Lcd screen the screen illuminates,but it doesn't display anything. I have a canon powershot SD110 digital elph.  When I turn the camera on the lcd lens illuminates but does not display images.  I cannot take new pictures but can view previous one.  Menu options occurs on the screen and can be changed.  I have misplaced my information booklet and do not know what to do to troubleshoot this problem and if it can be fixed.


Cannot get images deleted  ... HP PhotoSmart M437 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1651 seconds