Having problems with your Canon PowerShot A85 Digital Camera ?
Works only on Stitch Mode
\015 My camera only works on stitch mode. I try to go to other modes, like auto and the only thing I see is a black screen. I turn the dial to other modes and nothing shows up. I only can view the screen when it is on the stitch mode. What can I do to solve the problem.\015
Most likely: A/V plug has become faulty: http://www.fixya.com/support/t980272-a85_lcd_stays_off_in_all_modes_except
Repair Help & Product Troubleshooting for Canon PowerShot A85 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Works only on Stitch Mode
Most likely: A/V plug has become faulty: http://www.fixya.com/support/t980272-a85_lcd_stays_off_in_all_modes_except ... Canon PowerShot A85 Digital Camera
LCD works only in the stitch mode, it is dark in all other modes. Any suggestions? Thank you
Most likely: A/V plug has become faulty: http://www.fixya.com/support/t980272-a85_lcd_stays_off_in_all_modes_except ... Canon PowerShot A520 Digital Camera
I have canon power shot A 720 IS. Its been fine for 2 years. suddenly it stopped displaying in the LCD screen. But i can take pictures by looking through the view finder. Also, the LCD display works when in the video mode and photo stitch mode. please let me know the solution. Thanks.
Maybe the display was turned OFF. Check it and turn it ON. If still in problems, look for a specialized service to check you camera. ... Canon Digital Cameras
Screen is not working, unless the dial rotated to stitching mode.
Press DISP. button, and repeat untill the display shows up ... Canon PowerShot A85 Digital Camera
This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.
You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera
I had purchased canon sx20is sevn days ago.it gives good services but one day a typical problems are arrised. zooming lever were not worked, menu optionn,set,display are not worked and also modes are not properly worked, in auto mode movie mode are activated. so i would like to get your sugession to solve these problem.
If this is a new camera and you are having so many problems in the first week, try to return it or, at least use the warranty to get the company to fix it. ... Canon PowerShot SX20 IS Digital Camera
My d80 with 18 - 135 mm lens often does not work in the automatic mode and the screen shows 'r07'. It works in all the other modes and sometimes even the automatic mode will work. Any suggestions? VM
What focus mode? In AF-S the shutter won't release until focus is acquired.The r07 isn't an error. It's simply telling you how many more pics you can take in burst mode before the buffer fills up. ... Nikon D80 Digital Camera with 18-135mm Lens
Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli
Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera
JVC GZ MG77aa problem: When i turn my video camera on it works in picture mode but as soon as i turn it over to video mode a screen pops up sayin "communicating" [with a picture of arrors pointing to a video camera logo and then to the battery logo,] i have checked the battery at a JVC store and it has been checked and everything is fine with that, its just weird it works in picture mode and not video mode anymore it just keeps showing that "commutating' logo and restarting and does the same thi
This sounds like the software that initiates the video is amiss, and the camera can't initialize the video function. If so, the main board has to be replaced to fix it.\015\012However, just to check, make sure the battery contacts inside the ... Digital Cameras
My panasonic lumix dmc-fx01 has stopped working, When I turn it on, the viewing screen comes on, I see screen and menus, but the scrolling button doesn't work to select, the zoom doesn't work and shoot button doesn't work. When I have camera in play mode and in video mode the screen displays this message: memory card error please check card This happened before, I took it to be repaired and it cost 90 euro to have a bit of dust removed
Navigate to this page ..>Panasonic Lumix Dmc-Fx01 service manual and go to page #20 Disassembly and Assembly ... Panasonic Digital Cameras
LCD Monitor remains black except in stitch assist mode
I think this is most likely: A/V plug has become faulty: http://www.fixya.com/support/t980272-a85_lcd_stays_off_in_all_modes_except ... Canon PowerShot A75 Digital Camera
Powershot s410 My s410 is "old" :( but I love it and has been working amazingly over 10,000 photos in the 4 years I've had it. All of a sudden this week-end when I am in auto or manual mode the screen is black - I can't see what I am shooting. What is odd is that if I am in the panoramic mode or video mode the screen works. Even odder is that if I actually take a picture blindly (since the screen is black) it shows up on the display! Help... :) Thanks
Since it is taking a picture, and showing it up afterwards on the display, it definitely sounds like you activated the DISP or DISPLAY button. Seeing that you've used this camera for years, you should know that this manually turns the screen on and ... Canon PowerShot S410 / IXUS 430 Digital Camera
On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.
I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera
Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t
I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens
The mode dial doesn't seem to work. The camera is stuck on the high speed sequential setting. When we select iauto, it takes one picture and then freezes. When we select the camera option on the mode dial, it takes 13-15 pictures in succession and then freezes. The pictures are taken without the button being pressed. We need to power off to change modes. The camera did work for a little while.
Base from the description of your problem what we can do here first to correct the problem is to reset or restore the camera settings to its default from the camera MENU. Then once you done that check if its working fine now. ... Olympus Digital Cameras
I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac
I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras
Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do
The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera
Problem with the Canon PowerShot A630 Digital Camera Turning on camera in picture taking mode has lens going full zoom. In picture review mode no controls work. Out of a sudden I can't preview anymore, and in camera mode the zoom goes to 16X and I can't take pictures. Just doesn't work. I did not drop it or harm it in anyway.....please help.
This is going to be an internal problem. It sounds like you might have two problems going on. The zoom switch might be broken, and jammed in the on position. As for previewing your pictures, this could be a slightly loose ribbon connector from ... Canon PowerShot A630 Digital Camera
Hi, I have a Canon Powershot A700 digital camera and I am facing a problem with it. The 'Mode Switch' button, which changes the mode from Shoot/Record mode to Play/View mode is not working. Irrespective of whether the button is up or down it is in Shoot mode only. I am not able to download pictures to my PC as I cannot switch the mode to Play/View mode. Seems like a hardware problem. Can you please advise and help? Regards, Rohit Bajaj
If you have the manual for this camera turn to page 15.This tells you how to switch between Shooting Mode and Playback Mode.This is achieved simply by pressing the DISP button.This button is located below and to the left of the FUNC ... Canon PowerShot A700 Digital Camera
I have a Konica Minolta Dimage Z6. The camera worked fine for a year. Got a System Error and now the Mode Button does not work. Can not shoot using the viewfinder and can not place the mode Button to look at photo's. Also am not able to format disk in camera.
I fixed my problem by removing the BATTERY then the MEMORY CARD which I replaced with an empty formatted memory card and replaced battery then connected Camera to my LAPTOP and on the LCD it was saying setting USB connection then with mode switch s ... Konica Minolta DiMAGE Z6 Digital Camera
Will the Nikon SB600 speedlight work with the Nikon D60 Camera. All the instructions mention all the other Nikon camera's but not the D60. Will the auto flsh modes work with the auto modes of the camera
Yes. The SB-600 instructions don't mention the D60 because the SB-600 came out before the D60 existed. Bear in mind that the D60 does not have a commander mode so you can't use the SB-600 as a slave.Basically, as far as the SB-600 instruc ... Nikon Digital Cameras
Burst Mode The 'Burst mode' on my Kodak v803 camera does not work, er I think it don't work. Is it suppose to take 4 frame and automatically choose which is best, or can the user pick which one, or keep them all?
Turn the red eye pre-flash ON.... press the self-timer/burst mode button ... Kodak EasyShare V803 Digital Camera
I have bought this camera about one and half years ago. The camera worked for about alittle more than a year and it did work well. I have charged the battery to full a charge. The camera turns on but when you try and change anything with the camera it stays in this one mode. I try and cancel pictures from memory and it will not let me go there. I have tried all different modes and it will not move.
... Digital Cameras
My moultrie camera works fine in setup mode, laser and infrared work fine, but when i switch it to auto mode, it turns off 10-30 seconds later, sometimes it take a picture or two before it turns off, the status light never comes on either, batteries are brand new, whats the deal??
Hi,If the setting are Fine and you have already checked the batteries, It sound like this is an electrical problem. Make sure all connections are secured and tight. Take out the Battery and again put it back ON after few minutes. This wou ... Moultrie GameSpy 4.0 Digital Camera Deluxe
Hi there, I have a nikon D50 camera and the inbuilt flash unit does not work any more.... it pops up in dark conditions bu tthen fails to fire. The camera will adjust the shutter speed as if the flash was turned off, and the flash doesn't work in any flash mode or any function mode. Could it be the bulb perhaps? I have reset the camera as well to no avail. please help! thanks :)
Hello, and welcome to Fixya.. This is a very common and known issue with the D50 camera by Nikon. Some buyers flash only works once and then quits. Its due to the speed of which the flash pops up, it literally breaks ... Digital Cameras