Having problems with your Canon PowerShot A85 Digital Camera ?

Screen is not working, unless the dial rotated to stitching mode.


Answers :

Press DISP. button, and repeat untill the display shows up
Repair Help & Product Troubleshooting for Canon PowerShot A85 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Screen is not working, unless the dial rotated to stitching mode.


Press DISP. button, and repeat untill the display shows up ... Canon PowerShot A85 Digital Camera

I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac


I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do


The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

I am new to the video world and just purchased a Canon HF S200 from a guy here locally it is used but looked to be in great condition and working properly. But less than 15 minutes after the purchase and only transporting the camera in my car, when I powered the camera on everthing seemed to work properly except the rotating LCD screen would not come on unless you turn it 180 degrees counter clockwise it comes on and works properly. If you start to turn it back it goes off again. When I turn the


Have you got the user manual? If not, you can download it from www.iusermanual.com.I am not familiar with you videocam but the mannual shows all of the buttons and functio ... Digital Cameras

Help! I've dropped my Kodak dx6490. All modes on the mode dial flash. None of the modes work and camera won't turn off unless I take out the battery. BGS


Sounds like you will need to send it in for service. Get an estimate as it might be a better spend of your money to just buy a newer camera. ... Kodak EasyShare DX6490 Digital Camera

Works only on Stitch Mode


Most likely: A/V plug has become faulty: http://www.fixya.com/support/t980272-a85_lcd_stays_off_in_all_modes_except ... Canon PowerShot A85 Digital Camera

Lcd screen The lcd screen went black and the only way I can get it to come on is with the mode dial on stitch assist


This seems more likely: A/V plug has become faulty: http://www.fixya.com/support/t980272-a85_lcd_stays_off_in_all_modes_except ... Canon PowerShot A75 Digital Camera

I have canon power shot A 720 IS. Its been fine for 2 years. suddenly it stopped displaying in the LCD screen. But i can take pictures by looking through the view finder. Also, the LCD display works when in the video mode and photo stitch mode. please let me know the solution. Thanks.


Maybe the display was turned OFF. Check it and turn it ON. If still in problems, look for a specialized service to check you camera. ... Canon Digital Cameras

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again


I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

Wont work 20 is flashing in the lcd and mode but doesnt affect it? i have the d60 but it wont turn off, i tried swsitching it off **** it doesent work, it doesent take pics either i rotate the command dial and nothing happens,, whats worng help me , 5 months old


Hi...The transmission system that moves the lens in and out has a problem with it's gears. There is most likely a gear or an actuator that has fallen out of alignment and is getting stuck at a certain point as the lens comes in/out.There is some dist ... Nikon D60 Digital Camera with 18-55mm + 55-200mm lens

My panasonic lumix dmc-fx01 has stopped working, When I turn it on, the viewing screen comes on, I see screen and menus, but the scrolling button doesn't work to select, the zoom doesn't work and shoot button doesn't work. When I have camera in play mode and in video mode the screen displays this message: memory card error please check card This happened before, I took it to be repaired and it cost 90 euro to have a bit of dust removed


Navigate to this page ..>Panasonic Lumix Dmc-Fx01 service manual and go to page #20 Disassembly and Assembly ... Panasonic Digital Cameras

Continuous shooting I'm new to this so bare with me. I just got my Nikon D60 and I want to shoot pictures in continuous mode. I set it on manual, go into the menu and change it to continuous. I rotate the dial so it changes the shutter speed but when I take pictures it's just a black screen. As a matter of fact any time I try to take a picture in M it's just black. I'm hoping that there is just a setting I need to change and there's not something wrong with my camera. Thanks.


Hey man. Im not sure how new you are but basically i think your problem is you need to decrease the shutter speed to around 1/200-1/250 of a second and increase the apeture to around f10/12 and see if that works. If your operating at a high shutter s ... Nikon D60 Digital Camera with 18-55mm lens

Powershot s410 My s410 is "old" :( but I love it and has been working amazingly over 10,000 photos in the 4 years I've had it. All of a sudden this week-end when I am in auto or manual mode the screen is black - I can't see what I am shooting. What is odd is that if I am in the panoramic mode or video mode the screen works. Even odder is that if I actually take a picture blindly (since the screen is black) it shows up on the display! Help... :) Thanks


Since it is taking a picture, and showing it up afterwards on the display, it definitely sounds like you activated the DISP or DISPLAY button. Seeing that you've used this camera for years, you should know that this manually turns the screen on and ... Canon PowerShot S410 / IXUS 430 Digital Camera

Mode dial is no working properly


... Panasonic Lumix DMC-FZ18K Digital Camera

The mode dial doesn't seem to work. The camera is stuck on the high speed sequential setting. When we select iauto, it takes one picture and then freezes. When we select the camera option on the mode dial, it takes 13-15 pictures in succession and then freezes. The pictures are taken without the button being pressed. We need to power off to change modes. The camera did work for a little while.


Base from the description of your problem what we can do here first to correct the problem is to reset or restore the camera settings to its default from the camera MENU. Then once you done that check if its working fine now. ... Olympus Digital Cameras

On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.


I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera

This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.


You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera

My d80 with 18 - 135 mm lens often does not work in the automatic mode and the screen shows 'r07'. It works in all the other modes and sometimes even the automatic mode will work. Any suggestions? VM


What focus mode? In AF-S the shutter won't release until focus is acquired.The r07 isn't an error. It's simply telling you how many more pics you can take in burst mode before the buffer fills up. ... Nikon D80 Digital Camera with 18-135mm Lens

Blank screen My Canon Powershot SD600, when in picture taking mode, does not show any images on the screen -- it is dark. However, in video mode and play mode, it is just fine so I know the screen still works. And it can take pictures, I just can't see anything!


Sounds like you accidentally pressed the DISP (Display) button on the back of your camera. This manually turns the screen on and off in picture taking mode to save battery power. You could then use the optical viewfinder in its place. To turn it b ... Canon PowerShot SD600 Digital Camera

JVC GZ MG77aa problem: When i turn my video camera on it works in picture mode but as soon as i turn it over to video mode a screen pops up sayin "communicating" [with a picture of arrors pointing to a video camera logo and then to the battery logo,] i have checked the battery at a JVC store and it has been checked and everything is fine with that, its just weird it works in picture mode and not video mode anymore it just keeps showing that "commutating' logo and restarting and does the same thi


This sounds like the software that initiates the video is amiss, and the camera can't initialize the video function. If so, the main board has to be replaced to fix it.\015\012However, just to check, make sure the battery contacts inside the ... Digital Cameras

The dial on top that switches from portrait mode to action and other modes turns, but it seems to be "stuck" in portrait mode. The portrait icon shows on the lcd screen, and doesn't change when I turn the dial to other modes. And my pictures look terrible.


... Olympus Camedia C-5060 Wide Zoom Digital Camera

When I turn my 550 PowerShot on, I get a blank screen (black for the most part with white camera symbology around the screen, such as the flash symbol, etc). The screen works, as I can click a picture and see the photo momentarily. I can also view my saved pics. When I select the film mode, the screen looks normal.......meaning it displays a color image of what is in the lens. Have I inadvertently selected a mode which is causing this phenomenon?


Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on ... Canon PowerShot A550 Digital Camera

Canon S2is Hello evreone, I have bouth camera and after one year when i swich it on getting black screen but seems that camera is working(play mode is normal) same times when camera becomes "warm" after 20 black shuting it works normally, also when i'm opening chip cover and closing works normally but one or two shuts later black screen cold you help me sameone with this.. Tim


This is a common problem with the Canon camera. Please go to the following links and see what is going on. http://www.digitalcamera-hq.com/digital-cameras/category-question.html?qid=3894 and http://www.usa.canon.com/consumer/controller?act=PgComSmMod ... Canon PowerShot S2 IS Digital Camera

My Sony A700 works ok in the P,A,S and M modes. However when set in Auto mode the lcd shows Portrait. When in Portrait it shows Portrait. When in Landscape the lcd shows Portrait. When in Macro it shows Manual.When in Sports action it show Manual. In Sunset it shows Nightime. It also shows Nightime in both the Nightime and Memory Recall modes. The +/- button calls up the ISO screen instead of the ev screen. What's the solution?


Has it been serviced before? I remember one A200 with a very similar problem. There was a flex cable broken inside - the owner had given it to another technician before me and he managed to brake it. I think it could be a bad connection or some liqui ... Sony Alpha DSLR-A700

Blank LCD screen on shooting mode, but does show settings. Will not take pictures. Replaying mode works, shows pictures taken before screen went blank. New batteries. What is going on??? Is it fixable? I bought the Canon PowerShot A570 IS. I don't know if it is me or the camera but my LCD screen doesn't stay on. I can take a phote, the photo will then display on the LCD for 2 seconds BUT then the LCD goes blank, all i can see are the menu options. If I take a pic while LCD is blank my pic's


The Display button manually turns the LCD display on or off to save batteries. If you accidentally had turned the LCD off, It should only take one press of the button to turn it back on and leave it that way. As such, it's not you but the camera. ... Canon PowerShot A570 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2620 seconds