Having problems with your Canon PowerShot A95 Digital Camera ?

A95 Trouble My camera will not turn on. If i press the on/off button the little green light goes on, the lens starts to extend out, then a beeping noise sounds and it shuts off. On the screen, its black and a tiny code is displayed on the bottom that says "E18"


Answers :

The E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension.
\015\012Here's some things that you can do to try to correct it. Have already fixed several cameras with this problem by using these methods:
\015\012http://www.e18error.com/repair.html
Repair Help & Product Troubleshooting for Canon PowerShot A95 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

A95 Trouble My camera will not turn on. If i press the on/off button the little green light goes on, the lens starts to extend out, then a beeping noise sounds and it shuts off. On the screen, its black and a tiny code is displayed on the bottom that says "E18"


The E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. ... Canon PowerShot A95 Digital Camera

Black Screen The camera was never dropped. And, it worked perfectly just 1/2 hour before the problem occurred. Turn it on, Canon logo shows up, then black screen with 2 beeping noises, the screen says E18 and the camera shuts off by itself. Please let me know what the problem is. I am very frustrated about this!!! Many thanks.


Cannon will repair it free of charge,its a problem with ixus 400. ... Canon PowerShot S400 / IXUS 400 Digital Camera

My polaroid i1237 camera shuts off immediately when I power it on. It says the usual "Polaroid" on the screen and then sound 4 beeps and says "Goodbye" on the screen and shut itself off. I've taken out the batteries and replaced them, and the same with the SD card. Any clue if this is fixable?


I had the same problem with my camera it came on, it clicked, it said goodbye and that was it. what i did and it has worked since is apply gentle pressure to the lens and it's parameters. it took a few times of doing this between attempts at gettin ... Polaroid i1237 Digital Camera

My son dropped my Canon powershot SD450 while it was on, and the nose was out. I can still view photos, but the nose (or shutter... not sure what to call it) is stuck out and whenever I turn it on it beeps (the screen is black) and the screen displays "E18" in the bottom left corner. When turned on, right before the beep, the nose sounds like it is trying to extend, but almost like it is jammed. Is this fixable??


Definately fixable! The e18 error is just a lens error from when it was dropped. The site that specializes in the repairs on the Canon Powershots is: www.camerasandparts.com ... Canon Digital Cameras

When turning on the camera it makes strange noises (autofocus motor is trying to adjust) and the LCD-screen stays black. When turning off the camera the same noise sounds and ths LCD-screen says "lens error" I have tried taking out the battery for more than 24 hours, didn't work!


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Casio Exilim EX-Z77 Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

Digital camera I have a cannnon power shota510 digital camera when i turn the power on the screen shows the cannon screen then goes black then it makes a beeping noise then proceeds to shut off i've changed da battery but still cont. to do it


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try:\015\012\015\012 ... Digital Cameras

Camera will turn on. It will show stored pics, but the screen is black when trying to take pic (tho it has info on it- like how many pics I have left on memory card). If I take a pic, then it's all black. Sometimes it makes funny noises and often it will say "camera has detected an error and is shutting down. Please restart." And then the number 32. Just bought camera less than two weeks ago. Now out of country. Trying to take pics of trip. Help!


Hi there,Try to reset the camera to its Default Settings.Please let me know how this goes. ... Canon PowerShot A3100 IS Digital Camera

Focus Error When i turn on my camera, it makes a loud beeping noise, and the screen is black. When it finally shows the regular screen, when i take a picture it says I have a focus error. Is this fixable?


It's a message given when the internal lenses get jammed, possibly due to debris within the gears that move the focus. The "Focus Error" message can involve many FujiFilm models. ... Fuji FinePix Z100fd Digital Camera

E18 First the LCD screen showed a blur of colors. Now when in the review mode, it only goes to black, with a buzzing sound followed about 5 beeps then an E18 message. Haven't dropped it, immersed in water or anything unordinary.


The following blog outlines some repair options for an E18 lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot A70 Digital Camera

When I turn my camera on, the screen remains black and says turn power off and on. Upon doing so, when i turn it on again, it begins beeping and says turn power off and on. But if I go to the view pictures screen and back to the "take" picture screen the screen just stays black and says turn power off and on


Hi, \012 \012 Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolv ... Sony Cyber-shot DSC-M2 Digital Camera

My camera was dropped and now when i turn it on it beeps and then the screen goes black and says e18. i would like to take it apart since i have nothing to lose. do you have anything that shows how to do that?


E18 error refers to a lens error .Try checking if any dust got on the lens barrel if not check with the Canon dealer for a replacement as this is might be a factory fault ... Canon PowerShot A400 Digital Camera

Hi, i have a canon digital IXUS55. 5.0 mega pixels. last night at a wedding the camera (fully charged) stopped working. it would show me the pitures on the memory card but wouldnt allow me to take any (memory card was only half full). The screen was black with E18 in the bottom left corner, it also beeped 6 times and the lense made a horrid noise as it came out. any ideas? it wasnt dropped or didnt get wet. help


... Digital Cameras

My camera is on and working. I plug in the usb adapter to upload pictures and the screen goes black and nothing happens on my computer other than a beep acknowledging something has been plugged in - it doesn't say what just a sound. What is wrong?


Reinstall the driver ...for the camera ..if it doesn't need one ...after recognizing it ( beep) ...take a look into my computer ...and probably will find the card ..like a removable device ..and can copy paste picks from it ..if it is not locked from ... Digital Cameras

WHAT DOES IT MEAN WHEN THE SCREEN IS BLACK AND SAYS E18 AND MAKES A VERY STRANGE NOISE AND i CAN'T TAKE A PICTURE.USUALLY IF I TURN IT ON AND OFF SEVERAL TIMES THIS WILL GO AWAY


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A95 Digital Camera

When i turn on my camera. it loads and than it makes a beeping noise and than a black screen comes up and says lens problem. restart camera!


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\ ... Canon PowerShot D10 Digital Camera

Flash broken,lens stuck i turn it on and the camera clicks and it sounds like the lens is detached from what useed to move it. its says "acess" then black screen then "Turn power off and on." i think its forever broken.. :( flash broken,lens stuck i turn it on and the camera clicks and it sounds like the lens is detached from what useed to move it. its says "acess" then black screen then "Turn power off and on." i think its forever broken.. :(


I have the same problem...so do you think that it's so expencive to repair?? ... Sony Cyber-shot DSC-W55 Digital Camera

My Olympus SP-550UZ 18x optical zoom has a problem. I turn it on, and the lens starts coming out, but it get stuck, and the sounds is this clicking noise. Then on the screen it says ZOOM ERROR and red text. After the lens goes back in and the camera shuts off. I've had this problem for a while and I searched everywhere to fix it. Help!


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Olympus SP-550 UZ Digital Camera

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18


E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

Lens stuck Please help me, I tried to turn on my camera today (it had been working fine before) and when I tried to switch it on the lens would not fully it open and my camera was making a whirling noise. The screen is black and will not take photos. The lens won't open fully and when it does eventually close has difficulty doing so. The camera then makes a beep beep beep noise and displays "Please turn the power on and off again". Please help I can't live without my camera and can't afford


If the lens is not coming out, its stuck, or it wont completely open or close, that is the lens assembly, that needs to be repaired. You need to take it to somebody, that can either repair it or replace it for you. There is nothing that can be done, ... Sony Cyber-Shot DSC-P8 Digital Camera

I have a sony cybershot mpegmovieVX DSC-W55 I was turn it on & it say access on a black screen then it starts making a noise and another screen pops out and says to turn the power off and on again. SO I tried that & it does the same thing all over again..HELPP! I dnt know whats wrong with it.


Hello and welcome to FixyaThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a pr ... Sony Cyber-shot W110 Digital Camera

Blank Screen My camera was working fine and then I shut it off and tried to use it about an hour later...the camera turns on but the screen is blank and black. It makes all the sounds of taking a picture but only black pictures are taken.


... Casio Exilim EX-S600 Digital Camera

The camera was taking pictures a few days ago. The yesterday I went to take a picture and a blank screen came up but when I hit the shutter button in the view finder it would say "busy" and it would make a shutter noise the beep and not take a picture. Now it won't do anything. no screen picture. no beep. no shutter. no "busy". dead as a door nail.


Hi there, the lens detector in your camera circuit board is damaged or short. That's why its fully dead now. Try these for a luck. Remove the lens & power on the camera. Is any movement? if not then I suggest you please visit nearest Canon servic ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

My Friend dropped my DSC-W30 camerashot on brick floor (it was nocked off a not very high table) and now when I try to turn it on.. the lense just comes out then half way in then out.. (it looks liek a confused robot) like no joke. and all the screen says while it is doing this is '' Access '' and after a min or two.. it makes this beeping sound and the screen says '' Turn the power off, and on again '' ? i tryed it.. it continues the same rutine. Please help? my father gave this to me as a gift


Try Power Resetting the Camera.First, please turn OFF the Camera.Then, remove the battery pack from the Camera.Then, press and hold the POWER button on the Camera for 30 seconds.Then, reinsert the battery pack and check whethe ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2760 seconds