Having problems with your Canon PowerShot A95 Digital Camera ?

The image have white blurred images in all modes

\015 Whenever i take photos the images have white blurred images on them and they were dull in all modes\015

Answers :

CCD Failure !

u are lucky it will be repaired free of charge from Canon even if u are out of warranty bcoz it is a known problem in CCD chips pls see the link call canon in ur region and go rate me FIXYA for help

Repair Help & Product Troubleshooting for Canon PowerShot A95 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The image have white blurred images in all modes

CCD Failure !u are lucky it will be repaired free of charge from Canon even if u are out of warranty bcoz it is a known problem in CCD chips pls see the link call canon in ur region and go rate me FIXYA for helphttp://www.usa. ... Canon PowerShot A95 Digital Camera

Digital cameras Hi, i am a digital camera technician with the following problems:-FINEPIX- s5000 it has a blurred image when on camera mode,CANON-no image on camera mode,NIKON-no image on camera mode,please tell me where the problems could be either in the motherboard or the lens;waiting to hear from you Eric. Thanks

For the Canon, see this. Canon may repair it for free if it's on the advisory list:\015\012\015\012http://camerar ... Canon PowerShot A75 Digital Camera

I was taking pictures outside using a tripod mounting and had my Fujifilm FinePix S5000 on in photography mode - Auto mode. Upon placing the tripod for a new photo, I observed that the LCD monitor had turned white with intermittent horizontal flashing black lines. The view through the viewfinder is also white but without the black lines. When a photograph is taken the image is white. I should point out that in Playback mode I can view previously taken photographs perfectly on both the moni

Hi,It seems ccd imager chip problem, ccd imager chip is electronics device that converts an image into electronics signal. It is located at end of lens assembly in camera.CCD imager chip will be replaced to get correct view in camera mode ... Fuji Digital Cameras

White out Every photo I take seems to white out, as if it is letting in to much light. But it is more than this, as it is possible to see white streaking on the image as well. I have also tried taking photos in various manual settings, resulting in the same problem. It seems to be a little better in doors. However when I use video mode the image is normal. This problem first occured on holiday in Singapore - when I took it into a shop out there they said it was probably the heat. But the problem

There was a known problem with a batch of early F710s that came out of Japan - I managed to get mine sent back for a free repair... but that was four years ago. Unless it's still under warranty not sure what you can do. ... Fuji FinePix F710 Digital Camera

Canon Powershot G10 image quality problems... I have had my Canon Powershot G10 for 2 years and have had the same problem from the start... it is now driving me mad! When viewing photos in anything other than the supplied Canon Zoom Browser or Photo Professional the quality is poor. The images are noticeably blurred and appear grainy. I normally shot in manual mode with ISO80 and record images in RAW+JPEG. Processing the RAW photos seems to slightly improve the blur (though it is still there)

... Canon PowerShot G10 Digital Camera

I HAVE A GR2 DIGITAL CAMERA. I usually shoot in manual mode and and set white balance manually using a digital callabration target. Yesterday afternoon, after shooting most of theday without problems, my images started appearing completely washed out with an orange cast. This cast also was all over my calibration target image. The image was unclear with stripes running horizontally across my display. This problem is present in all modes. Itried everything I could think of to resolve the matter

I doubt that formatting the card will do anything but, if you choose to do that, download any pics first since formatting will completely erase the card. Have you tried going back to "Auto WB" to see if your camera works properly that way? How about ... Ricoh GR Digital Camera

Hi, the photos i take are getting blurred and the image is not at all clear no matter how shot the distance may be i click the image.the only new icon i see on the screen is vibration warning symbol along with steady shot symbol.i have reset to the default modes but still the blurring of the image persists.Can you pls suggest the possible solution for this. i have a W90 Sony ciber shot camera Thanks in advnace..

If you are shooting in Auto mode with flash, this should solve your problem. Make sure you are not dictating any of the settings, i.e. choosing a longer shutter speed, a very small aperture setting, or a very low ISO (sensitivity) setting. ... Digital Cameras

In camera mode, screen shows a blend of image and digital spectrum analyzer bars blurring the image

The ony way is to get the CCD replaced with a new one. Contact NIKON for free replacement as this comes under manufacturing defect. ... Nikon Coolpix 5700 Digital Camera

HI All of a sudden, there is lets say no more image on the display or the image is purple and full of weird lines. No image at all and when I click to take a picture everything works out well: the flash the mechanism but no picture appears as taken Thanks. My fine pix has a similar problem . In movie mode it is fine but when I take snaps all images are found to have bright white horizontal lines , looks like a light sensor problem , no solution found so far . :(

BUT NOW U HAVE FOUND SOLUTIONCCD FAILURE !but u will get it repaired Free of Charge as Fuji has taken notice as all manufac and i got my S5000 repaired Free from Fuji just call them tell them about BAD CCD it is a known manufa ... Fuji FinePix S5000 Digital Camera

Sony DSC-T1 Still shots are washedout...almost completely white. But video recording works ok. I have checked every setting (0EV, Multi AF Focus, Multi Metering, Auto WB,OFF PFX, and default camera setup). Viewfinder/display is good, resulting image is nearly completely white....like the white balance is whacked.... I set camera in video and recorded ok....no distortion or other problems. Problem Only seems to be in still shot mode.

Its's problem of ccd imager in your DSC-T1 camera and that part will be replaced.Sony announced free of cost repair for subject problem. Click ... Sony Cyber-Shot DSC-T1 Digital Camera

Blured images I used my cam few days ago images were great, but now when I trying take pictures images becomes completely blur, in sunlight photos becomes completely white. but I can take video as good as earliar. What can i do to overcome from this problem..

... Nikon Coolpix S3200 16 MP Digital Camera Red

Only Red When I turn the camera on the screen shows only a blur and not of the image of what I am taking, but just a color blur or a white blur, depending on the lighting. when I take the picture I get what shows on the screen. When I turn off the display and take a picutre the picture comes out like what is on the screen. Please help

This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot S500 IXUS 500 Digital Camera

Image looks with white verital striped lines in playback mode

Mine had the same problem (except the stripes are horizontal).  I sent it to Canon and sure enough it is the CCD problem that many of these have.  The good news is that it is covered under a recall and Canon will fix it free, including the ... Canon PowerShot S1 IS Digital Camera

Canon Powershot SD500--LCD--No image in all modes. White Screen

Hit the DISP button to turn display on.If trying to show XXX image, this will become a problemMake sure you are pointing the camera at something you want to look at versus a white wall.If all these fails, the camera needs to b ... Canon PowerShot SD500 / IXUS 700 Digital Camera

My Canon Powershot A470 picture output is blurred horizontally by a white stripe and when in the outdoor you cant see any image but a white

I have the same problem here. had it first in 2009 just about 8 months after purchase but had it fixed under warranty. It took them about 4 months to return my cam. they still have to send it to malaysia( im from philippines).Now, 2 years lat ... Canon PowerShot A470 Digital Camera

White lines My camera now records whie lines across the image, like scan lines on a TV and is prone to overexpose. Recording on video mode is no problem so I assume the sensor is OK. It seems like the post processing software has gone funny. Is there a way to reset it or even take pictures in raw mode . My old casio had hidden keystrokes to do this

I read somewhere else that it is a shutter problem ... Panasonic Lumix DMC-LC70 Digital Camera

RCA AutoShot 200X Digital Zoom Video Camera - the only thing that shows up in the lense looks like a white sheet... it will not show any image, even on the "VCR" mode it will not play back anything. It just shows a kind of bright white. Thank you! Rebecca

... Digital Cameras

I have recently had the screen replaced after the images developed a magenta tone and became blurred. Now the camera works fine above water but when mounted in the underwater housing the underwater images revert back to the dark magenta tones and are blured. It is the same regardless of wheterh the camera is set to U/W, auto or video mode.

You have a great camera but after repairs, you can't expect it to be 100% functional. Did you replace the screen by yourself?Sound that the display was not correctly installed. The difference between 'above the water' and 'underwa ... Canon PowerShot A75 Digital Camera

My LCD Monitor displays only black w/ fuzzy white bands or blocks as I move it around. No images come on at all. This was an intermittent problem, but now that's all I get. All 14 modes affected - none work. Cannot take pictures at all, however, images on the CF Card are still viewable.

Is this Canon A95 camera or some other model?Let me know exact model number please as symptom shows its defective ccd imager IC problem.Awaiting your reply to proceed.Thanks. ... Canon PowerShot A95 Digital Camera

I have a Canon Camcorder MV750i purchased april 2004 It was not used for a few weeks when it was turned on it was able to playback but no image appeared on the screen when it was turned on. The various modes were displayed and in the middle of the screen were white marks indicating the corner of the image.

Here is a thread with solution to same problem.regards ... Digital Cameras

I purchased a d80 recently and took about 2,000 shots at an outdoor music festival virtually 90% of them came out with poor image quality, i was shooting in "fine" mode and alternated my settings primarily from portrait, auto, P, settings- example i was taking a picture of a trombone player wearing a white shirt and black pants, when you look at the black, it looks like scatter multicolored pixels, like an image taken with a 2 megapixel camera from 500ft away and then enlarged. I was taking the

Hey mcgeedds,\015\012 What you’re seeing is probably what is called digital noise. At low levels of light the sensor in the camera that records the image shares data from one pixel to the ones adjacent to it whi ... Digital Cameras

Blank Screen I have a Sony Cyber-shot model #DSC-S40. The screen is bright white with an occational blur of the image I am aiming at. I have taken the batteries out several times and that cleared it up one time but has since went back to the white screen. I can still take pictures using the veiw finder but I can not see them on the screen nor can I access any menu functions. The camera still takes awsome pictures so I don't want to just throw it away. Please help! Thank You, Tim

I have been facing the same problem with same model and this is permanent problem it seems with this model (Sony Cybershot DSC S40). It causes because of the following:SYMPTOMSLCD display is either blank or WHITE. When the cabine ... Sony Cyber-Shot DSC-S40 Digital Camera

When I turn my 550 PowerShot on, I get a blank screen (black for the most part with white camera symbology around the screen, such as the flash symbol, etc). The screen works, as I can click a picture and see the photo momentarily. I can also view my saved pics. When I select the film mode, the screen looks normal.......meaning it displays a color image of what is in the lens. Have I inadvertently selected a mode which is causing this phenomenon?

Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on ... Canon PowerShot A550 Digital Camera

Kodak v705 - Auto-focus will not focus when in zoom mode. Image on lcd screen oscillates from focus to blur. Picture image not focused.

Hi,This\015\012 is a common problem on this set. This is either due to faulty CCD \015\012sensor or faulty LCD screen. Look at the previous recorded images or \015\012videos. If you see the same white lines i ... Kodak EasyShare V705 Digital Camera

My minolta dimage X20 whern turned on is all ready to take a picture but is only showin blackness, i can preview pictures etc and do every thing else My Minolta DiMAGE X20 is doing the same thing and has been for a year. I've just been too lazy to go buy a new one. When I turn it on the screen is completely black, but sometimes when you point it at the light it will get a couple white streaks across it. When you take a picture this is the only image that comes up. When in playback mode, I can s

Thats called "vigneting" and is caused by misalignment of the lens.... has it been dropped or mishandled? if so, it needs re calibrating and setting up by a pro camera technician. ... Konica Minolta DiMAGE Z6 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1014 seconds