Having problems with your Canon PowerShot A95 Digital Camera ?

Will not power on. new batteries installed.

\015 Will not power on. new batteries installed.no response at all.had used rechargable batteries until a 3 day hiking trip when used regular Duracell AAs.worked well... downloaded all pics perfectly.3 more episodes of picture taking went well.went to take new pics a few days back & camera powered up then abruptly shut down.went to restart, lens came 1/2 way out & camera again shut down.new batteries then installed - camera now completly dead.\015

Answers :

\015\012Hello

Thank you for using FixYa for your problem

Always check the batteries first but if is it still giving the same fault, your camera is faulty.
It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras have any user-serviceable parts.

Please rate our solutions and if you still have problems please call back for more ideas to help you

Thanks
Richard Scott
Technical Support
New Zealand

Repair Help & Product Troubleshooting for Canon PowerShot A95 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Sony DSC-H2 will not power up. New batteries installed. No lights. little red light near battery does not light up when batteries installed. Is there a power fuse installed on this unit and if so how do I access this fuse to check if it is working?


... Sony Cybershot DSC-H3 Digital Camera

I have a samsung digimax A402 camera. I have never had a problem with it powering on until now. I have placed brand new double A batteries and when I press the power button on the camera the screen tells me my battery is low and the camera powers off. I have tried different brands of batteries as well. What is the reason my camera will no longer turn on and stay on with new batteries installed?


My camera did exactly the same thing. I found that there was a minute trace of corrosion on one of the battery conections inside the body of the camera. After cleaning up the contacts to remove the corrosion the camera powered up without fault. It di ... Samsung Digimax A402 Digital Camera

Lens stuck out No display No link to computer but will charge battery. Only way to power off is remove battery. Numerous key holds when power on result in no change. View lott's on FixYa. Try gentle but firm exercise of barrel, left right with success when some inward movement felt. Insert battery, power on, screen display yes, take picture yes [onboard memory as no SD installed for tests]. Will update if problem comes back. Gentle but firm is the key, good luck.


... Samsung HZ35W WB650 Digital Camera

My Cannon Power Shot A520 Camera will not power the lens up when I turn it on. I get the message "No Image" on the viewing screen, but nothing else happens. Back Switch is set on camera symbol, but camera acts like it is set on view. I have installed new batteries and battery terminals are clean.


The camera may need a software update which can be done through manufacture for $50 or you can downlaod an update from their website and follow the directionsOr the zoom may be dirty or debris is stuck in the zoom lens and needs to be blow out ... Digital Cameras

I have a model c-700 camera that will not power on. The camera sat in a drawer for several years and the batteries went dead. Installed new lithium batteries and will not power on.


Clean the battery terminal/connector inside the camera's battery compartment using a cotton buds with alcohol or metal cleaner ... Digital Cameras

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f


Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

Digital rebel operates shutter at battery installation and fails to power up


Take the lense off and put in on again. ... Canon Rebel XT / EOS 350D Digital Camera

Will not power on. new batteries installed.


\015\012HelloThank you for using FixYa for your problemAlways check the batteries first but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repair centr ... Canon PowerShot A95 Digital Camera

Hello, I have a Kodak easy share z1275 and has worked well for me for almost 3 years. Used it last week with no problems, has never given me any problems. Suddenly on Saturday, I turn it on to take a picture, lens begins to retract and the camera shuts off, it appears that there is a power supply probelm. I changed batteries, even though the ones I had in it were recently installed, but went ahead and put in new ones, and it will not power on. The blue power indicator light begins to come on


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare Z1275 Digital Camera

No power the camera stopped operating, and when freshly charged battery was installed it still had did not turn on. When putting the battery in, noticed that the battery & charger have 4 contact slots/posts - but the camera has only 3 contact posts. Is that normal, or could 1 of them broken off? If normal, what else could be the problem? Absolutely love the camera & want to have it fixed. Please help. Phil


They only have three connectors in the camera, unfortunately, you may be looking at a repair bill or replacement, as the minimum cost to repair may be more than replacement cost. i have an FZ 15 and love it, but the newer ones do much better especial ... Panasonic Lumix DMC-FZ20 Digital Camera

I have just purchased the samsung memory cam smx-c20 and the power will not turn on. The memory card and battery are correctly installed. I plugged the camcorder in to charge it over night. When the camcorder is plugged into the wall the power works but as soon as I unplug the camcorder the power turns off and will not turn back on until I plug it in again. Please help me. Lana


You have got a camcorder with faulty batteries Lana. Thats why its turning off immediately as soon as you unplug. DId you buy it new or used? Camcorders do not use the usual batteries they use Li/Ni cells that are pretty expensive. If its new you may ... Digital Cameras

Power button My power button will not power on. I have a new battery installed.


Hi There should be a reset pin hole on the camera somewhere. Check the manual for the location. Then press the on button and use a paper clip to insert into the pin hole right after. This should rset the internal computer. Hope this helps.G.Eva ... Fuji FinePix F480 Digital Camera

My Canon S2IS has served me perfectly for over five years. All of a sudden it is going through a set of new batteries in half an hour. A few pictures and short video clips after installing brand new Duracells I was getting the low battery warning and then a few more minutes of same it was dead, showing the change batteries message. Any ideas or is it time to retire this baby? Also, when I power up the camera, the lens makes a grinding noise while it is extending. What's up with that? Could it


Are you new batteries are NI-MH ones?\015\012Canon canon's low vote detection setting is low, and you'd better use Li-ion Canon Camera batteries. ... Canon PowerShot S2 IS Digital Camera

Camera will not power up. New batteries installed,all doors and ports triple checked for closure.


Take your camera in to like Best Buy and try it out with their battery to see if it will work.This is like a free check like I provides free [email protected] ... Canon Rebel XT / EOS 350D Digital Camera

WILL NOT POWER ON BATTERY IS CHARGED ALSO INSTALLED OPTIONAL AA BATTERIES


In this case you have a problem, like you did not know.If the camera is current or less than one year old, has not had any damaging impacts, has not had water or liquid exposure, and you have taken good care of it, then you may want to in ... Mitsuba Digital Cameras

Camera problems I installed new batteries but after pressing the power button the lense came out but the camera won't operate and now the power button doesn't even work in order to shut the camera off and the lense is still out.


Turns out the brand new batteries I installed were dead. ... Samsung Digimax S500 Digital Camera

EOS 40D ERR 99 Shooting is not possible turn power switch to off then on again or re-install battery. I have tried this and it does not help I have taken everything off and out of camera and started over I have reformatted cf card, I have purchased a new battery I have tried different lenses nothing has worked.Hope you can help, Thanks Cheryl


... Canon EOS 40D Digital Camera

FUJI S3000 CAMERA WILL NOT POWER ON, NEW BATTERYS INSTALL NO RESPONSE FROM CAMERA Camera will not power up. It just up and died on me. I am hoping there is some sort of hard reboot or reset option.


My camera now works!!! Found a suggestion to clean the battery compartment on opposite side of switch with lighter fluid. Only had pressurized fluid for lighter so used rubbing alcohol instead. Put a few drops of 70% Isopropyl alcohol in chamber and ... Fuji FinePix S3100 Digital Camera

I lose power when I install the lithium batteries in the camera Fujifilm S2 Pro Digital)....if the batteries are left out , the camera functions fine albeit more slowly....I can also turn off the camera manually by tripping the switch in the compartment where the lithium batterries go ....What's up?


Inspect the tangs on the battery compartment lid. They may be askew from improper battery insertion.Thanks!!2 ... Fuji FinePix S2 Pro Digital Camera

I have a friend's Canon SD1200 IS,I bought a new battery for it.I charged it overnight and installed battery.The camera will not power up.When I was given the camera it also had the lense in the "extended" position.Battery contacts look good,I also pressed the battery in a bit to ensure good contact while trying the on/off button.Any suggestions?


Sounds like there may have been some water damage to the internal parts. If you can, see if the is an adapter available to use with it. This may bypass an affected area and power it up that way. Hope this helps. :) ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

My canon power shot A95 has a black screen when in shooting mode, like the lens is totally blind, all the other functions look normal. Camera was OK until I installed by mistake ni-metal hydride batteries, but the problem continues after replacing with alcaline batteries.


Sounds to me like your CCD was damaged. The CCD is the "chip" or "brain" of your camera, so to speak. The only way to fix this is to have the CCD replaced. But first you should find out about the cost, which may be similar to buying a new camera. ... Canon PowerShot A95 Digital Camera

I have a Canon EOS 40D When I switch it on all appears fine. When I take a photo the shutter remains open & all power is lost. I then need to remove & re-install the battery to recover power. I can view existing photos on the memory card but as soon as I switch to take a photo & click the shutter, the above happens again. Before I decide next steps I was hoping someone out there could help.


See if the problem is related to the memory card. Start by ejecting the memory card and after saving to disk via card reader, format the card. If there is a problem writing to the card, it will probably show up during the format process. Or, inser ... Canon EOS 40D Digital Camera

My new mega pixel digital camera: Phototags express software has been installed. when I press power on the LCD screen diid light up or sound a beep. It supose to light up & beep. Held the power as told to,nothing happen-I check the batteries twice to make sure it there were in correctly.


Your batteries could be dead even though you have check them. ... Digital Cameras

I have a Kodak Easyshare CX7430 model digital camera. Even after installing new batteries, the low battery light lights up and the power only lasts for about 2 minutes or less. Is there anything I can do to remedy this?


Hi,Please check the contacts inside the camera and clean them if the problem persist then there must be something short inside the camera and that's why the battery is discharging so fast. ... Digital Cameras

I recently bought a SanDisk 4GB SDHC card for my DXG-572V. I put it in the camera, and I turned the power on. A screen comes up saying "Format Card?". I have tried selecting both "Yes" and "No", but each time I select either one, the camera powers off automatically. I just installed brand new batteries, also. How can I get past this screen?


Your problem is that you are trying to use an incompatible memory card. The DXG-572V is not SDHC compliant and will only work with regular SD cards. In theory it's compatible up to 4GB but in practice there are few standard SD devices whi ... DXG Technology DXG-572V Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2008 seconds