Having problems with your Canon PowerShot A95 Digital Camera ?

Camera will not switch on/off properly, and "E18" appears on the screen

Answers :


"E18"indicates an error that involves the lens unit or lens cover in your camera .This error appears where the lens is prevented from properly extending or retracting .The error may also be displayed if the lens camera has been subjected to an external shock, or if a foreign substance (i.e. liquid, sand, dirt) enters the camera.Hold the camera so that your fingers do not touch the lens unit when you are shooting. Make sure the camera is off before the camera is placed back in the case. Exercise caution to ensure that the camera does not accidentally power on while the camera is stored inside the case.If you cannot clear the error code by turning the camera off and then on again, or if the error code is displayed frequently, a camera malfunction may have occurred and might require service from canon.Or else try pressing the power button on and held it down while extending the zoom lens. The lens will extend out and the camera will be freed from the error.

Thank you !!
Repair Help & Product Troubleshooting for Canon PowerShot A95 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Camera will not switch on/off properly, and "E18" appears on the screen

Hi,"E18" ... Canon PowerShot A95 Digital Camera

E18 error I have a Canon Ixus II which is four years old. Today I switched it on, took a couple of pictures which appeared blurred on the screen. Deleted these pictures. Camera lens stayed out. Switched camera on and E18 showed on bottom left of screen.

The following outlines some repair options for a lens error:\015\012\015\012http://camerarepair.blogspot.com/2007/ ... Canon PowerShot SD110 / IXUS IIs Digital Camera

Power shot SD20 digital camera When the on switch is depressed a short musical tone plays and then it stops after about 5 seconds and E18 appears on the screen momentarily before the camera turns off.

E18 is the standard Canon lens error. The lens gets stuck when extending. If you did not drop it and there are no signs of damage you can check with Canon and try to get the camera repaired under warranty.If it is not covered here are a ... Digital Cameras

I have a Canon XM3 camcorder. It has given me many years of good service. Recently it has developed a fault. When I switch it onto Camera mode, and then flip the switch to Standby, the small screen flickers blue for a short time, but it does not show the image from the lens. If I switch off, and sitch to Playback, the small screen works OK and all the Playback works fine. Sometimes when I switch to Camera, and Standby, the small screen flickers blue, and then an image from the lens appears, but

Its the problem of CCD assembly\015\012CCD (image sensor) failures, particularly in conditions of high heat and humidity, led to cameras capturing images with either no picture at all, or with extreme distortion and se ... Digital Cameras

My lens for my canon powershot SD550 is stuck open.when switching the camera power on E18 appears on the screen in the bottom left corner.

The E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. ... Canon PowerShot SD550 / IXUS 750 Digital Camera

Kodak V803 I think this is due to the camera being dropped: The camera switches on but all that appears on the viewscreen is a white light accompanied by black patches of distortion. The distortion suggests that the camera has suffered an impact as it has the appearance of a smashed window - with lines of distortion running across the screen. The view screen itself - is in tact - no evidence of impact - cracks or dents. I cannot get rid of this screen distortion no matter what button I press. Wh

It would appear you have a damaged LCD screen. The same problem happened to my daughter's V803. The camera will take pictures fine but you will only be able to see them if you download them onto a PC. A replacement screen can be easily ordered and ... Kodak V803 Digital Camera

Kodak V803 I think this is due to the camera being dropped: The camera switches on but all that appears on the viewscreen is a white light accompanied by black patches of distortion. The distortion suggests that the camera has suffered an impact as it has the appearance of a smashed window - with lines of distortion running across the screen. The view screen itself - is in tact - no evidence of impact - cracks or dents. I cannot get rid of this screen distortion no matter what button I press. Wh

There is no way except to replace with new screen.Sorry. ... Kodak EasyShare C513 Digital Camera

Err 02 When i switch on the camera the EOS appears on the lcd screen other than that it is blank. After a while an error 02 appears (CF card fault). I have tried previously working cards and they all do the same. The manual says re-format the card but as the lcd screen is blank, this is not possible. The battery is fully charged. Is this a problem with the camera or the card.. My gut feeling says it's the camera.. Please help, Thanks...

Hi,If we talk about Error 02 - This error occurs when image data cannot be written to the CF card.\015\012This error can occur when the CF card is not fully seated in the camera\015\012or if the 350Ddoes not detect a card-ready signal wit ... Canon Rebel XT / EOS 350D Digital Camera

Jammed lens My zoom lens is jammed, and when I switch on the camera the red light switches on but no picture appears on the screen. The zoom lenses remain as they are when the camera is both on or off. (they are jutting out as if the camera is switched on.) Can I repair my FE-210 and if yes how?

Would be best to send to repair center ... Olympus FE-210 Digital Camera

How do I download pictures from my Olympus camera to my PC? I have connected the camera to the computer using the USB cable, and this has been recognised by the camera. A box has lit up on the camera screen and I hake clicked "OK for PC". The camera screen then says "Please wait a moment" and then appears to switch off and nothing else happens. Help please.

Use a separate card reader to download your pictures. ... Olympus Stylus 710 Digital Camera

I swapped memory cards with my daughter as mine had a bigger memory. However it didn't seem to work properly in her camera. Her camera now freezes on the opening screen when its switched on and does nothing else, the lens also refuses to go back in. I put the card back in my camera and now mine just switches off when you turn it on after making 3 blip noises! Now both cameras don't work with or without the memory card. I've checked the manual for mine which has no explainations. Also checked bat

The first mistake happened when your card was tried in your daughter's camera. She should have immediately formatted it first since the card was optimized for your camera's operating system. Since she didn't do that and tried to use it in her camera, ... Agfa DC-1030S Digital Camera

I have a sony cyper-shot digital camera and have been experiencing a blurred screen as soon as the camera has been switched on and this has remained blurred whilst taking photographs. There is also a code that keeps appearing on the screen at random times. The camera has not been dropped or near any liquids of any kind. If you can offer any solutions as to why the camera may be doing this that would be greatly appreciated. Regards Tammy Mitchell

Focal lens is out alignment inside lens module, requires manually resetting. If you are in the U.K i can help you out with an inexpensive repair . p.m me at [email protected] ... Sony Cyber-shot DSC-W55 Digital Camera

Camera lens movement mechanism seems to be damaged, as when switched on, the camera lens does not extend out completely and the object appears blurred on the screen. Similarly when switched off, the lens does not retract back completely and it needs a manual push to put it in a little more. But even then it does not go in fully. Rest of the functions are working well. The damage is the result of an accidental body weight going on the camera, when it was in on condition.

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras

The screen on my camera will not display anything at all. The camera appears to turn on, but the screen is blank. Even when I switch it from one mode to another, there is nothing displayed on the screen

Have you tried taking pictures with it? Do the pictures show up when taken? If so, then it's likely that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to sa ... Canon PowerShot SD600 Digital Camera

My Finepix s5700 will not turn on even with new batteries. I slide the turn on button and the green led lights, but then nothing else happens. If I push the preview button, the pictures appear and I can see them all, but if I try to start shooting, the camera turns off again and the screen remains black. If I try to switch between the shooting programs, nothing happens again. I have the camera for about 3 years and such problem appeared just a few weeks ago. Thank you in advance for your cooper

... Fuji FinePix S700 Digital Camera

The screen on my camera says 'Memory Card Locked'. The solution is to take out the memory card and flick the switch on the side. But I can't take the memory card out- it appears to be stuck. At the same time as the screen starting to say 'Memory Card Locked' the memory card only comes out half way so I can't flick the switch. How do I solve this problem??

... Panasonic Lumix DMC-ZS3 Digital Camera

When i switch my samsung S830 camera on the green light comes on but nothing appears on screen. the camera then makes a beeping noise before switching itself off.

Hi I am Vortash this happens to my camera when the batteries are low .. if you have the batteries ( re chargeable ) that where supplied with the camera you may find that they are not accepting a charge any longer and require replacement .. try a new ... Digital Cameras

Having dropped the camera, the lense will not retract and the code 911 appears on the screen each time an attempt is made to switch on and camera immediately switches itself off (leaving the lense out)

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Samsung Digimax S600 Digital Camera

I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f

Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera

Digimaster Happycam 5010 Problem: The shutter that protects the lens is stuck fully open. The camera is stuck with lens fully extended. ERROR 2 appears on the screen. The LED near the top left of the display flashes red. The camera will not take pictures. Before the camera got stuck the movement was getting more and more difficult to achieve. I needed to switch the camera off and on. This camera seems to be identical to the Premier Camera SL-8.

Camera lens mechanism is broken, need new lens assembly. Cost would be more then camera worth. Better to get new camera. ... Digital Cameras

Hi, I purchased a replacement LCD screen for my SD3500 from Rongstar DigitalInc. Since I've learned they do not have a good reputation and to make matters worse the LCD screen will not function properly. It seems to light a bit and the "touch" seems to cause camera to beep as if the touch screen were working, but no images or "scene to take" is viualized ion the screen. As I said only a faint lighting ( appears to be black as if no light coming off it) . Help! I am sure it is connected corr

I had a similar problem with a Canon camcorder. I replaced it with a new LCD screen from Rongstar Digital, and it works! Saved a $350 camera for $20! However, installing the new LCD was very difficult, and is not meant to be done by amateurs. Yo ... Canon PowerShot SD3500 IS / IXUS 210 Digital Camera

Kodak v610 camera (easy share) My 10 year son was using our v610 camera and the following error message E45 (please see user manual) appeared on the screen. We were unable to switch the camera off and therefore the shutter remained open. The shutter will only close if I remove and replace the battery and when I turn the camera back on the shutter remains open and the same error message returns. I have checked the manual and it doesn't mention this problem. thank you jane

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Kodak EasyShare V610 Digital Camera

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.

The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

The camera switches on fine - will take a pictur/ review - but then requests that the camera bes witched off/ on- do that - screen message appears system error [o.i.s]. Happened to try the camera with out memory card [ SanDisk ultra 8GB] - works fine! - tried another cars [same model] from another camera - same problem! any ideas gratefully received

The problem is isolated when there's a memory card in the camera, is it right? Are you using a brand new memory card? What type of card is it (SD, MicroSD, MiniSD)? If it's brand new, you need to verify with the manual if the camera could ... Digital Cameras

The lens on my Canon digital camera will not close... i am unable to take a pciture and do not know the reason for this....when the camera is put on i am able to see my old pictures but when i click to take a new picture the screen is blank..i dont know what to do...please help...i have the canon power shot sd 500 camera and the problem that appears is the E18...... please help me

OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Canon PowerShot SD500 / IXUS 700 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4518 seconds