Having problems with your Canon PowerShot A95 Digital Camera ?
A95 Start Problem
\015 Hi and thank you, my A95 just stop working well a few days ago, when I press the on/off botton it flash one time and then nothing, this is in playback mode, in shoting mode, it tries to open the lens but don\302\264t do it completly, one time did it, I even took a picture and then stop working, I had change batteries, CF, review the pins of the CF, and the battery and CF covers, nothing. I had read about the CCD problem, but I am not sure if that is my case? \015\012It is out of warrranty and I am not even in the us,in my country there isn\302\264t a canon service for digital cameras, so I really need some help.\015
I'd suspect a broken ribbon cable connector latch where the keypad matrix ribbon connects to the main board.
Repair Help & Product Troubleshooting for Canon PowerShot A95 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
A95 Start Problem
I'd suspect a broken ribbon cable connector latch where the keypad matrix ribbon connects to the main board. ... Canon PowerShot A95 Digital Camera
My Canon A95 has horizontal grid lines on the LCD screen AFTER a photo is taken. The view on the screen is normal when you are framing the photo, but AFTER you take the shot, the playback of that scene has these grayish horizontal lines and the image color is washed out. Changing the batteries and the CF card makes no difference, and loading the photos on Adobe Photoshop shows the same problem on the computer screen. This just started yesterday after we downloaded a bunch of photos from the came
If the menus and icons look normal, but images are distorted or discolored, you may have an image sensor (CCD) problem. See Canon's service notice regarding this issue ... Canon PowerShot A95 Digital Camera
My Canon A95 has horizontal grid lines on the lcd screen after a photo is taken. The view on the screen is normal when you are framing the photo but after you take the shot the playback of that scene has these grayish horizontal lines and the image color is washed out. Changing the batteries and the cf card makes no difference and loading the photos on Adobe Photoshop shows the same problem on the computer screen. This just started yesterday after we downloaded a bunch of photos from the camera
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera
Camera stalling The problems started after using my camera on a windy day at the beach 3weeks ago. After a few days, the lens started getting stuck, and wouldn't come out, or if it did, didn't focus properly. This problem was intermittent. Then, in the past several days, the camera systems stall when I switch it on. The lens comes out and zooms fully. but It will not respond to any of the control buttons. Which part of the camera is the problem? is it fixable? How much is the estimated cost of r
This problem is related to your lens , because even if the lens extend fully and for the past things that happened on the camera there's a big chance that some dirt get in to the camera that causes the problem. What you can try first is to take the b ... Panasonic Lumix DMC-FX7 Digital Camera
Color problem The same issue as the one who asked about the color problem. We bought this Olympus FE-280 Digital Camera March 2008 i think. It started to have this color problem last month which is April. The problem is whenever I turn on the camera the screen has this red violet color and it doesn't capture good photos. What do you think is the problem? How can I solve this? I already tried removing the battery and the memory card and tried changing the settings but still it never changes. Help
Try to see if a filter is activated like magenta ...look in the menu if there is a reset settings feature...Usually it is in the main menu..one that reset it to the factory settings ..there can not be any other thing but something from the settings a ... Olympus FE-280 Digital Camera
Focus problems Hello, I just got the new A95 after enjoying the A80 for a few months. I'm experiencing two major problems, occurring especially when shooting in low-light conditions: a. The image displayed on the LCD screen is very dark, while in the A80 it would automatically become lighter after pressing half way. b. The auto focus won't work lower indicator blinks yellow). I have experienced these problems so intensely with my A80. What might be the problem?
There are settings in the menu to turn on the AIAF did you buy it used? maybe the settings need to be reset. If you have the manual there is a sequence you have to do to reset the camera to default settings.\015\012\015\012One thing to note this may ... Canon PowerShot A95 Digital Camera
The shutter speed priority setting on my Canon 40D keeps jumping to a different speed that I haven't set. E.g - set at 200, jumps to 25 when I go to take a photo. I have spoken to Canon regarding the problem and they have suggested that I clear the user settings. This initially solved the problem for all of an hour, but the problem has now started up again. I'll probably be sending it in, as I think it might be a problem with the hardware, just thought I'd check here first. Any suggestio
Maybe you also can check the auto bracketing is turned off. ... Canon Digital Cameras
Hi Guys, I am hoping that someone can offer some explaination for the following. I bought a Nikon D7000 in November and it has suddenly started displaying 3 small doughnut shaped marks on my images. I have not removed my Nikon 16-85 lens from the body so I would not have thought that sensor dust was the problem. To eliminate that the problem is on the lens I have now swapped the lens with my telephoto and the problem is still there! I have just sent an email to the company that I purchased from
Don't kid yourself....most cameras come with factory dust already installed!!! Yours just took awhile to deposit on the sensor. Google the words "cleaning a DSLR sensor" and you will find sites showing you in pictures how to clean the sensor and wher ... Digital Cameras
My touch screen of samsung ST550 camera isn't working. I cant switch on the dual screen because the button on the bottom left isn't working. I was just taking some pictures of water and a very little bit of water splashed into my camera. I wiped the water off and that's when the problem started. How should i fix the problem? I dont think the water created the problem because the amount of water which splashed into my camera was very small. Thank you.
... Samsung DualView TL225 / ST550 Digital Camera
Put a new fully charged battery in - the camera would lasted for a couple of minutes and then would not switch on. The battery works fine in an identical camera. Put in a second battery - that worked for a bit then started flashing battery problem and wouldn't switch on. 5 minutes later - it did switch on - lasted for a short time and then started flashing ERR 99, and then wouldn't switch on again. Battery works fine in an identical camera. 10 minutes later - started working again, but the Sigma
It is due to some kind of electrical contact failure. For more \015\012details and common causes of Err 99 read the following article:http://www.lensrentals.com/news/2008.12.31/canon-err99 ... Canon Digital Rebel XT / EOS 350D Digital Camera with EF-S 17-85mm IS Lens
My webcam i go to use my webcam and it come up error and says "this application has failed to start because kdu_v32r.dll was not found. reinstaling the application may fix this problem I cannot open my id on yahoo messenger so i did was re install the messenger but before it was completly finish it says that kdu_v32R.dll was missing and by reinstalling it again, it will fix the problem. I did as the command says but i end up with the same problem. I cannot open my webcam when im using the messe
Try posting problem in the correct area, this one is for Canon Digital Cameras. You may get the response you are looking for. ... Canon Rebel XT / EOS 350D Digital Camera
Slider Prob I've had my S30 for quite a while and lately i've had some problem with the slider opening up. Dont know if something got in between the slider and the cam or something. Anyway with some trouble i could still open up the slider and thus start up my cam but then one day when i was trying to close my cam i started to slide it to close. Finally it closed and i slided the slider onto the lens but then the lens started to open up again. But the slider was in the way so the lens opened up
Dang, what a weird design. The lens needs to go threw a cycle before it can reach the idle position where it waits for a comand from the user. If its in the closed position and you turn it on it extends to its full range then stops at the idle positi ... Canon PowerShot S30 Digital Camera
I have a ccd problem with my canon powershot a95 digital camera sir i want to know that if i repair my camera to solve this problem and changed its ccd then would u guarantee that this problem will not exist again and my camera will work properly for a long time.
... Canon PowerShot A95 Digital Camera
Zoom problem I bought my SP350 Olympus in Dubai. My friend dreeped champagne in the lens, so I guess it glued the inner mechanisms. The problem is that sometimes it opens just fine, but when I start zooming it get stuck and beeps and the screen shows ZOOM PROBLEM or something like that, does anyone have a solution to that? Thanks in advance
Well you could bite the bullet and strip the camera down and douse the lens parts in alcohol (the real stuff from a chemist) but the lenses are really hard to put back together again. If you contact a guy named John at [email protected] He is a ... Olympus SP-350 Digital Camera
My Pentax Optio M4 suddenly started to shut down and power off after starting up. It starts up normally, then gives 3 short beeps, then shuts down as if I had just switched it off. I have recharged the battery but the problem still remains. I cannot reset the camera to factory defaults as it doesn't stay on long enough for me to access the memu options.
... Pentax Optio M40 Digital Camera
Hi my kodak camera has a problem. When I start the camera the screen turns all blue and some letters that says, "ERROR L03" and I can't do anything at all. I already change the battery, I charged it, and I put a new memory card and still the same problem. Do you thing that there is a solution for my problem? Thank you
L03 means that the firmware does not have the correct checksum.\015\012Firmware has to be reinstalled. I can help you do this, but as firmware\015\012files and the way they are updated are considered confidential, I can't\015\012help you here in publ ... Kodak EasyShare V1073 Digital Camera
DISPLAY PROBLEM Hi, I have Nikon Coolpix L10. Recently this cam got display problem. Some dark circle got on display. It started at corner and passed slowly to centre. Now the display completely disappeared. Now no images are showing. please suggest me to solve this problem immediately. thank you ravi
Chances are the LCD screen has failed and would have to be replaced. (ive seen this screen problem when it goes to white or black marks when cracked)you basically would have 3 options, 1: send it out for repairs to Nikon? ( se ... Nikon COOLPIX L10 Digital Camera
Canon powershot a300 camera, I am having a problem with he start up of this camera, when starting the camera the start up sounds,but the screen view is blank, therfore is unable to capture the image, can anyone help?
So the pics u take are also black and blank but power of camera is there u can see signs on lcd and all info but lcd is blank CCD failure !!Dont worry u can get it repaired free of charge from Canon see the link and call them ... Canon PowerShot A300 Digital Camera
My fujifilm E550 digital camera has a problem where the cilyndrical piece in front that usually moves in/out is stuck half way (won't go back inside) and the camera will not take pictures. The camera is giving me a "zoom error" message. This problem started when the batteries where running out of charge. The problem is not resolving even when I put in fully charged batteries.
You may need to use some light "force" to manipulate the lens barrel into its proper orientation. Try a combination of turning it on and helping the barrel to rotate one way or the other. Also try a little manipulation when the camera is shut off, to ... Digital Cameras
I cant start the flip. i can recharge it (lamp is blinking) but it wont start. even the restart doesnt work... it worked pretty well but then the problem started. im in germany and no one can fix it cos they dont know it over here
Did you get it fixed i have same problem ... Pure Digital Flip Mino Digital Camera
Starting error hi i m nilesh patel from india in my camera starting problem when i start it i see access error and say that turn off camera and on again 15 times i do it but it is not solved
Are the batteries fresh? Can you start it with the charger plugged in?\015\012what error code do you get?\015\012\015\012errors and messages support:\015\012\015\012 ... Sony Cyber-shot DSC-W30 Digital Camera
I have a Canon A720is (about 5 years old) that recently has started to show problems.
I think you immersed camera in water. This might have damaged corroded contact of LCD supply line and PCB. ... Canon PowerShot A720 IS Digital Camera
PANASONIC dmcfz8 Problem: When I turn on the camera and remove the lens cap I get a message on the lens that says "remove lens cap & press button". It seems like the zoom is stuck. We were using the camera for a inside night graduation & was at a distance from the subject that we wanted to shoot. After a few zoom shots we shut the camera off and when we tried to take more pictures the above problem started. Please Help!
Try to help the lens go out by pulling it very very lightly... ... Panasonic Lumix DMC-FZ20 Digital Camera
PROBLEM CONNECTING A jvc gz-mg334hek hard disc camcorder to my computer, Software is installed ok. When camcorder is connected and powered up my compter says 'NEW HARDWARE DECTECTED'and starts the 'FOUND NEW HARWARE WIZZARD' after a brief attempt at connection the wizzard stops and says 'There was a problem installing your hardware , The Data is invalid' This means i cannot transfer any data from the camcorder to the pc or vice versa - Is there a solution to this.!!!
Hi sixthpistolI would try deinstall the software for the camera, then reinstall it, reboot then try the camcorder again. Be sure to install the software BEFORE plugging in the gear. I am more than happy to answer any other question ... JVC Digital Cameras
Camera problem The problem with our camera started after our baby was dragging it in the sand. Now, it only says lens error, restart camera. I took the battery out for a minute but it didn't help.
There is sand inside the lens, this is quite normal if camera had been in contact with sand, you won't fix it by taking battery out, try blowing on lens gear, in attempt to remove sand particle, you can also use a compressor, like the ones at the pet ... Canon PowerShot SD750 / IXUS 75 Digital Camera