Having problems with your Canon PowerShot A95 Digital Camera ?

When power is turned on - E18 is displayed on the black screen of the LCD monitor - there also is a clicking sound


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\012 \012the advise is useful. please do not hesitate to let me know if you need \012any further assistance. Also, please be so kind to let me know if you \012found this helpful.

Regards
Andrea.
Repair Help & Product Troubleshooting for Canon PowerShot A95 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When power is turned on - E18 is displayed on the black screen of the LCD monitor - there also is a clicking sound


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon PowerShot A95 Digital Camera

My Pentax Optio M60 lens seems to be frozen half way out of the camera with the lens cover also partially open. When I turn in onn it sounds like the lens is trying to focus then turns intself off. Nothing is written on the screen unless I also press the menu button which displays VER 1.00 before bleeping three times and turning off or the green button which displays VER 0163A SBM -FIRM before beeping 3 times and swithcing off. Nothing else seem to do anything. I havn't dropped it or got the cam


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Pentax Optio M60 Digital Camera

Display problem Canon powershot Sd110 The amera is clicking the photos but we cannot see it on the screen. the screen just showa a horizontal line and doesn't give any picture or anything.It used to click photos very clearly and everything and I can see the previous photos as well which are already saved in it. It is not giving any view while clicking the photos and the screen remains dark in colour with the horizontal slim light going up and dowm.It also gives the sound on clicking the photo b


Contact Canon - dont say where purchased- could save a complication- but yes CCD problem- should be replaced FOC - a hefty discount on a new one ... Canon PowerShot SD110 / IXUS IIs Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


Could not believe it but it worked for me as well. First time I see that a good smack makes it work ... Sony Cyber-shot DSC-W70 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.\015\012\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre. ... Sony Cyber-shot DSC-W50 Digital Camera

My cibershot DSC-F717 does not have anything in the viewfinder and the LCD displays the settings and options.The screen is black with yellow words and numbers Also my zoom will not work. The LDC does not have an image on the viewfinder nor the LCD. I do have the LCD setting options displayed. The zoom will not show where the setting is on the LCD and I have checked all the settings (the focus on the zoom mode, conversion in the set up turned to off).


HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Sony Cyber-Shot DSC-F717 Digital Camera

Blank lcd I just got a new canon 600D. After playing with it for a while, i turned it off. Then after 5-10 mins i turned it on once again, and opened the lcd screen, but it shows blank(or say black). I can see that the lcd backlit is workeing, but nothing (no content) is displayed. Can this be an issue of low battery ? pressing the shutter button full also not capturing the picture. Flash works though, and optical view finder too, but it does not capture the photo.


Hi there:Some symptoms of a defective CCD include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. ... Canon EOS 600D Rebel T3i Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

My son dropped my Canon powershot SD450 while it was on, and the nose was out. I can still view photos, but the nose (or shutter... not sure what to call it) is stuck out and whenever I turn it on it beeps (the screen is black) and the screen displays "E18" in the bottom left corner. When turned on, right before the beep, the nose sounds like it is trying to extend, but almost like it is jammed. Is this fixable??


Definately fixable! The e18 error is just a lens error from when it was dropped. The site that specializes in the repairs on the Canon Powershots is: www.camerasandparts.com ... Canon Digital Cameras

Help me due to the misuse of my pansonic lumix DMC-FX7 it was fallen in the ground and it's lcd screen inside has been broken. It can be use for clicking photos but the lcd screen has beeen broken down and we can not see for the display so please sir can u help in giveing me tne suggesstion for repairing and i want a best place for the repairment for the cause and also price for the repairment i n banglore city . if u can help me then it could be very kind to me sir.hoping for the positive respo


If you need some good used parts you may want to contact a guy in South Carolina who has lots of parts for all the Panasonic Cameras at reasonable prices. I think his email is [email protected] ... Panasonic Lumix DMC-FX7 Digital Camera

Err 05 in readout display on Canon EOS Digital Rebel XT: When I turn on the camera, I get a bief read-out on the screen simultaneosly with three clicks that sound a bit like the shutter. Then the screen clears and a second or two later displays "Err 05". Can you help?


... Canon Rebel XT / EOS 350D Digital Camera

When I turn my 550 PowerShot on, I get a blank screen (black for the most part with white camera symbology around the screen, such as the flash symbol, etc). The screen works, as I can click a picture and see the photo momentarily. I can also view my saved pics. When I select the film mode, the screen looks normal.......meaning it displays a color image of what is in the lens. Have I inadvertently selected a mode which is causing this phenomenon?


Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on ... Canon PowerShot A550 Digital Camera

The lens doesn't open when we turn on the camera. The camera makes the sound of turning on and the LCD monitor lights up showing standard Optio display, but the lens don't open neither the zoom. After turning on, the Off button stops working and the only way to turn of the camera is by removing the battery.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Pentax Optio 550 Digital Camera

Lens malfunction when i turn on my camera on the display screen it's says to turn the power off and then back on again. and i do this several times and it never changes. also the lens will not open and it makes a constant buzzing sound.


Hello,\015\012you are right. Actually there is some problem with lens assy.. When you turn on the camera the processor of camera start to check whole camera including mechanism. when it find something abnormal,it will not let to turn on the camera. T ... Sony Cyber-Shot DSC-P92 Digital Camera

The LCD screen does not display when the camera is turned on. I have installed new batteries. The screen works to see pics in the memory but does not work when taking a new pic. Also when using the view finder to take a pic the results is just a black pic, the image is not shown on the pic.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A60 Digital Camera

When i open my camera (olympus sp800uz) it only display blank screen on the LCD but when i try to click the shutter button it works and also the zoom button. what is the problem of my LCD do i need to send it to the servicer center to be repaired?


Yes, your camera needs servicing. ... Olympus SP800UZ Digital Camera

Nchatta Hello, My Canon s45 was working perfectly until it was dropped from a very very small heigh in a soft leather case with protection. The camera works in the sense that it can read and display the images from the SD card perfectly, the lense extends but you cannot see anything on the LCD when wanting to take a picture bar a white box in the middle that usually turns green once focussed (but now doesn't.) The screen is just black. The shutter clicks, takes the picture, but just a black LCD


It seems like if u see icons on lcd then sorry to tell u i think ur CCD is gone it seems like , but to make it sure first get the lens checked but iam pretty sure abt the CCD bcoz it is risky in impacts and jerks ... Canon PowerShot S45 Digital Camera

Flash broken,lens stuck i turn it on and the camera clicks and it sounds like the lens is detached from what useed to move it. its says "acess" then black screen then "Turn power off and on." i think its forever broken.. :( flash broken,lens stuck i turn it on and the camera clicks and it sounds like the lens is detached from what useed to move it. its says "acess" then black screen then "Turn power off and on." i think its forever broken.. :(


I have the same problem...so do you think that it's so expencive to repair?? ... Sony Cyber-shot DSC-W55 Digital Camera

Canon A75 No startup sound & display on LCD, rest of things works fine


Think it might be your batteries. 700mah batteries are pretty weak by today's standards (most are at least 2,500 mah these days). I'm guessing your batteries are several years old? If so, they're really only meant to have a usable shelf life of a ... Canon PowerShot A75 Digital Camera

Canon eos rebel 2ti does not display picture in lcd screen after taking a picture. Also the picture is not saved to the memory card. So essentially, the camera sounds like it is taking pictures, but is not.


... Canon EOS 400D / Rebel XTi Digital Camera

Transfering Photos I'm using the USB cable provided to connect my XTi to my computer to transfer images. But the EOS Utility software is not allowing me to click on "Start to download images". Also, when I turn on my camera the LCD monitor says "busy" in the top left corner. What am I doing wrong?


Edmerk:\015\012In your case it seems like the software is the problem, try uninstalling it completly and reinstalling it back after a restart of your machine, also check this:\015\012 ... Canon EOS 400D / Rebel XTi Digital Camera

When I turn on the camera the lcd screen is black despite removing the lens. when i switch to viewfinder it is also black. camera will display images on card in playback mode


... Fuji FinePix S7000 Digital Camera

A95 Trouble My camera will not turn on. If i press the on/off button the little green light goes on, the lens starts to extend out, then a beeping noise sounds and it shuts off. On the screen, its black and a tiny code is displayed on the bottom that says "E18"


The E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. ... Canon PowerShot A95 Digital Camera

LCD Display I haven't used my canon for a while - I've just turned it on and though the LCD display works to show pictures I've taken and the settings screen - I can't see anything in it when I take a picture (it's just black) when I press the Disp button it just switches from a black screen to the settings screen - please tell me what I can do so that I can see the image in the LCD before I take the picure. Thanks for your help


As far as I am aware, the 400D doesn't have a live preview mode.What you are describing is perfectly normal and is how 99% of digital SLR cameras behave.Are you sure it used to do this?Matt ... Canon EOS 400D / Rebel XTi Digital Camera

My K7 will turn on but the LCD screen and monitor won't turn on. The only thing that shows up on the LCD screen is the battery button. When I try to take a picture it makes a funny noise. I didn't drop my camera or anything and it worked perfectly yesterday. The only thing is that I did charge my battery overnight. It still turned on normally earlier in the day but then I didn't take any pictures (as my daughter wouldn't look) so I turned it off until a little bit ago when I turned it on and dis


... Pentax K7 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3377 seconds