Having problems with your Canon PowerShot A95 Digital Camera ?

Display Image after shooting

\015 Images have horizantal lines and cant be seen clearly. There is a heavy tinge as well. I tried downloading it to a computer to see but no improvemnet. The images on the LCD display before the shoot is fine but recorded images have many lines across them.\015

Answers :

I believe this may be an example of a recognised fault in the CCD sensor in some Canon cameras. To their credit, Canon will repair this for free, regardless of warranty status, (with free shipping in the US only).


for details on what to do, and the camera models to which it applies. This applies worldwide (except the free shipping), for non US countries simply look up your local service centre contact details and explain the problem.

Good luck 
It sounds like your CCD imager is broke, but it sounds like your saying that the images look fine as your taking them, but only show up bad after stored.... If that's the case, then I will need more info, but if they DON'T look clear on the screen BEFORE you press the shutter, it's the CCD, which is usually an expensive repair.
Repair Help & Product Troubleshooting for Canon PowerShot A95 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No image on LCD screen, only irregular lines of varied coloring. When picture is snapped, it is of these lines--no image. Help. Details: I turned the camera to shooting mode but it does not display the image of what I want to shoot, but just a series of horizontal lines. If I take the shot, it shows the lines which were displayed on the LCD screen. If switched to playback mode, previously shot images show up fine. I checked the batteries; they were fine. I replaced them anyway, to no avai

I have the same problem and after doing research, I found this website. ... Canon PowerShot S1 IS Digital Camera

Black display when placed in shooting mode, display is black. and when i take pictures, the recorded image is also black. but in playback mode, i can see the previous recorded images, and it's okay. but the recently recorded images taken when that 'black display problem' occur, the image is just really black. what could be the problem?

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot A80 Digital Camera

NIKON D70 I have a Nikon D70 Whilst taking a series of photographs I get through to about 40 images then the camera stops shooting and the format card display comes up on the display. If the CF card is removed the images taken are ok and can be down loaded. If the card is then replaced without deleating the images then further images can be taken until the problem re-ocurs. I have tested the camera by taking a full card of images all at once and there is no problem. The issue seems to ocur if th

Problem in card holder repair or replace ... Nikon D70 Digital Camera with 18-50mm Lens

Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.

Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera

I HAVE A GR2 DIGITAL CAMERA. I usually shoot in manual mode and and set white balance manually using a digital callabration target. Yesterday afternoon, after shooting most of theday without problems, my images started appearing completely washed out with an orange cast. This cast also was all over my calibration target image. The image was unclear with stripes running horizontally across my display. This problem is present in all modes. Itried everything I could think of to resolve the matter

I doubt that formatting the card will do anything but, if you choose to do that, download any pics first since formatting will completely erase the card. Have you tried going back to "Auto WB" to see if your camera works properly that way? How about ... Ricoh GR Digital Camera

Screen damage? no problems in two years until today after shooting several "best shot" in monochrome, then returning to regular shooting position in color. no drops ever and only gentle usage. I turned it off and put camera away, then on turning it back on, the LED screen displays one-third solid white, one-third grey and only one third (bottom) of actual image. it also has an odd black "lips" image across the middle of top half. various colored lines across the bright part. I took battery out f

This problem can be sent to the manufacturer if you still have your warranty...this cameras strength is its weakness the LCD is virtually unprotected. cost of repair is more than cost of used replacement. ... Casio EXILIM ZOOM EX-Z850 Digital Camera

No image The LCD screen flickers, nothing is visible, no shooting of image. However, on shutter click in Auto mode the flash operates but does not record any image. In view mode, the already recorded images are displayed.

No image in shooting mode on Canon S500. Flash operates and shutter clicks. Whats wrong? ... Canon PowerShot S500 IXUS 500 Digital Camera

Display Image after shooting

I believe this may be an example of a recognised fault in the CCD sensor in some Canon cameras. To their credit, Canon will repair this for free, regardless of warranty status, (with free shipping in the US only).Seehttp://www.usa.c ... Canon PowerShot A95 Digital Camera

Inverted image When powering on my Konica Dimage E50 the LCD image is reversed and inverted and all the icons around the screen are upside down and reversed, in the opposite corner to where they should be. When trying to shoot the image is displayed upside down, when viewing pictures store on the card, they are also upside down. Hoping you can assist or is it too late?

No solution I know and I have the same problem!!! Did you find a solution yet??? ... Konica Minolta DiMAGE E50 Digital Camera

In shooting mode lcd displays no image. Happened

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A75 Digital Camera

No display to see image to shoot

Check near the screen for a button that looks like a TV screen. Press it to toggle from screen to viewfinder. ... Fuji Digital Cameras

Have canon Powershot A75 3.2 Mega pixel camera .. Now it is having display issue. Once i open my camera lens come out power come but unable to see the image in lcd to shoot.. Can you assist

First try pressing the DISPLAY button. If that doesn't fix it then this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty st ... Canon PowerShot A75 Digital Camera

Lcd does not show image when camera is in shooting mode, but does show image when displaying the storage card and menu screens

HI,\015\012\015\012THis is the problem with the CCD device,\015\012\015\012Your CCD is worn and you need to replace your CCD..\015\012\015\012Please rate this solution\015\012RNJ VINODKUMAR ... Canon PowerShot S2 IS Digital Camera

I have an Olympus E300 and I don't know what I did but when I turn on to take photos now the display shows "0" photos available to shoot even though I've essentially cleared all images off; and when I press the button to shoot it will not snap. I have tried the factory reset ( P setting, w/ open FC door holding playback and ok etc etc ..) and this has not helped. Help! Thanks....Sandra

Hi Sandra,\015\012\015\012I would suggest that you format the card in the camera.\015\012You will need to insert the card in the camera and then go into the camera's menu system and choose format.\015\012\015\012In case ... Olympus EVOLT E-300 Digital Camera

I own a canon powershot S3 is and I am getting this strange E24 error where in the camera lense would comes out and just goes in . Another interesting thing I observed is when the LCD is on and I am in the image display mode (That is browsing the existing images) then there is no problem if the LCD panel is open or closed the camera just seem to respond normally, only when I change to the shooting mode the camera lense would come out and go in with the camera shutting down. what is problem with

It sounds like it needs to be serviced. If you're out of warranty, then go to this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they ... Canon PowerShot S3 IS Digital Camera

My olympus e volt 500 will not display image when in shoot mode

There is a little button on the back, marked 'info'. Press it to switch from picture view to settings view. It also operates the viewfinder.Olympus also has a good photo editing program that is free and it allows you to edit photos and stit ... Olympus EVOLT E-500 Digital Camera

S5000 - camera does not display images in 'review' mode - still stays in photo shoot mode

Defective ccd imager!! company will replace this ccd imager free of charge. Year 2002 up to 2005 released unit has a factry defect ccd imager. the company recalled these unit and replaced with a stronger version of ccd imager( they are still doing it ... Fuji FinePix S5000 Digital Camera

My cam can't display any image before and after shooting

Having gone over a month with no response, I assume this is no longer a problem. ... Digital Cameras

My new finepix z37 always seems to have a blur image warning symbol on the display when in shoot mode.. why is this? and can i get rid of it? plus all the manual says is may need to use a tripod??

... Fuji Digital Cameras

The image I see in the display before shooting is verticaly distorted and when I take a picture it also comes distorted

You'll have to get it repaired it'll be a little expensive... godluck... ;) ... Canon PowerShot A85 Digital Camera

There is no image showing up on the display. There are function icons on the screen and you can go through the menu but when you point to shoot a picture the screen is black with the icons.

A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot S2 IS Digital Camera

In shooting mode LCD displays No image

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot A75 Digital Camera

THe image display window won't show the subject when I am trying to focus and shoot. It only shows data.

This DSLR does not have live view, hence you cannot see what the lens sees while composing the shot, you can only see the picture after the shot. ... Nikon D60 Digital Camera

Focus problems Hello, I just got the new A95 after enjoying the A80 for a few months. I'm experiencing two major problems, occurring especially when shooting in low-light conditions: a. The image displayed on the LCD screen is very dark, while in the A80 it would automatically become lighter after pressing half way. b. The auto focus won't work lower indicator blinks yellow). I have experienced these problems so intensely with my A80. What might be the problem?

There are settings in the menu to turn on the AIAF did you buy it used? maybe the settings need to be reset. If you have the manual there is a sequence you have to do to reset the camera to default settings.\015\012\015\012One thing to note this may ... Canon PowerShot A95 Digital Camera

File error After shooting a number of pictures on two different memory cards, the display begins to show "file error" and the images after that time can not be recovered. If the card is moved to another camera it still show "file error". A new card will work until the same problem crops up. After that point the card seems to be permanently damaged.

I take a picture and go back to view it and file error shoews up. Can those phtos be retrieved? ... Sony Cyber-shot DSC-H2 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1072 seconds