Having problems with your Canon PowerShot EOS D60 Digital Camera ?

Studio Paul Buff and Sunpack 622 strobes will not fire...

\015 Hi, I use this camera quite a bit in my studio and the other day noticed that some of the images were coming out dark. I had it hooked up to Paul Buff Ultra wired remote and the flashes kept going off repeatedly. I disconnected the D60. Quickly checked over and grabbed my D10 to finish session of 2 year old twins. I shoot on manual. After client left I put the camera in different modes and exposures were fine. I just noticed that the socket on the camera is a little loose. Could the socket have a short or need replaced and any idea on the cost? Any help would be greatly appreciated...\015

Answers :

Hi,

As you said the images are coming out black.

1). Bad or defective CCD. and/or

2). shutter not working.

in\015\012the first case the only solution is the replacement of the CCD.
Please click HERE

And in\015\012the later case sticking of shutter blade, non functioning of shutter\015\012blade will cause the problem. This can be rectified by sending it to\015\012some repairer.

Here are the contact details you can find the near service center located in your area:
1 800 828-4040

Goodluck..
Are you located in US?
Repair Help & Product Troubleshooting for Canon PowerShot EOS D60 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Studio Paul Buff and Sunpack 622 strobes will not fire...


Hi,As you said the images are coming out black.1). Bad or defective CCD. and/or2). shutter not working. in\015\012the first case the only solution is the replacement of the CCD. Please click ... Canon PowerShot EOS D60 Digital Camera

Studio Strobe not firing with Coolpix


The Coolpix line of cameras require a "tip positive" sync connection to an external strobe unit (when using the Nikon AS-15 Flash Sync Adapter). On some external Studio Strobe units the sync polarity is easy to change because of the type of plug: \01 ... Nikon Coolpix 5000 Digital Camera

Studio Strobe not firing with Coolpix


The Coolpix line of cameras require a "tip positive" sync connection to an external strobe unit (when using the Nikon AS-15 Flash Sync Adapter). On some external Studio Strobe units the sync polarity is easy to change because of the type of plug: \01 ... Nikon Coolpix 5700 Digital Camera

Pentax K110d flash trigger problem, I have 2 flash trigger strobes set up and a flash on the hot shoe of the camera, but with shutter release the trigger strobe lights fire but do not show in the pic, only the hot shoe flash is reaching the sensor. but if I slow down shutter to 0.5 sec the strobes show up.?


Your camera uses a PTTL flash system. That means the flash on the camera fires a "pre-flash" to set the exposure and then the main flash. Your flash trigger strobes are reacting to the pre-flash and firing before the shutter activates. This all happe ... Pentax K110D Digital Camera

Hotshoe and sync cable will not fire strobs. However, if I connect the sync cord via my SB800 the strobe will fire.... Help :D


What strobe are you using besides the SB800? Probably the best solution is to use a hotshoe extender for the mystery strobe (like an SC-15), and then set the SB800 in SU-4 mode (i.e. fire when any other strobe around it fires).Sounds like the ... Digital Cameras

Can i use studio strobes with a nikon D7000


... Nikon Digital Cameras

I use a Nikon D200 in my photo studio. In the past week, my issue has occured twice, both times very intermitently. I'm in the middle of a session, all it going well and camera is functinoing properly, and is also triggering my strobe lights as it's supposed to. But for some reason unknown to me, the camera will suddently quit recording the images to the disc. It is still functioning as though it is, but I cannot see the images on the LCD screen and there is no record of them on the disc. I swit


I use to have that camera and I had issues with the Microdrive,\015\012\015\012Do you have any problems when writing to flash media ?\015\012\015\012Look at the contacts etc, are they clean and does the drive fit tight?\ ... Nikon D200 Body Only Digital Camera

Shooting in studio in Manual Mode, Auto Focus & Shutter issues


This camera has a weak capacitor causing this. Eventually it will just quit working altogether sooner or later ... Canon EOS 40D Digital Camera

Remote Firing of Flash Units


The EOS 40D does not have a transmitter built in. The remote flash units must be set to "Slave" and the on-camera external flash unit (eg Speedlite 580EX) or transmitter (ST-E2) set to "Master". Note that the Speedlite 430EX doesn't have the function ... Canon EOS 40D Digital Camera

D50 onboard flash deploys but won't fire


Your flash head pivot has come unclipped and has slid back into its hole too far. The problem can be repaired by using an L-shaped paperclip to pull the flash pivot back out to its proper position. First, remove the battery from the camera and bend a ... Nikon D50 Digital Camera

FD-95, F-stops & Strobes?


You might try adding an external view finder that is close to the FD-95 picture size.\015\012\015\012A lot of old cameras have them and it could also be used for sports as well, it could\015\012\015\012be added with Velcro or some other type of mount ... Sony Mavica MVC-FD95 Digital Camera

2nd certain sync doesn't fire on the 2nd certain


... Canon EOS-1Ds Mark II Digital Camera

When i turn my camera on it says Lens Error 114,1,0,0, or 114,0,0,114 or 223,0,0,114, then shuts off, what can i do?


Please also try to upload new firmware: I doubt that it will solve the issue, but the alternative is a repair.\015\012\015\012Connect the camera with the computer.\015\012Turn the camera on.\015\012Click onto the link and foll ... Kodak Easyshare M753 Digital Camera

My camera kodak easyshare c813 say lens error when i turn it on and it dont let me take a picture it say lens error 111,0,0,0 then it changes to lens error 221,0,0,0


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Kodak Easyshare C813 Digital Camera

I ha a Kodak EasyShare C633. When I try to turn it on, it display the message ....Lens Error 111,0,0,0 then as it is shuting down it displays another message.....Lens Error 221,0,0,0. Can it be fixed?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare C633 Digital Camera

When i switch on my kodak easy share c613 camera, it displays lens error:111,0,0,0 followed by lens error :221,0,0,0 and then goes off.please help.


Good\012 day,This is a common problem and sometimes can be fixed.Please\012 see details on my tip on how to fix this error here: ... Kodak EasyShare C613 Digital Camera

When I turn it on it has a lens error 111,0,0,0, then it goes off showing lens error 221,0,0,0. I can't get it to come on.


Try these procedures. ... Kodak EasyShare C613 Digital Camera

Lens problems my camera keeps saying "lens error 111,0,0,0" then "lens error 221,0,0,0". the camera is a kodak easyshare c813


There is a problem wit your lens section, get it repaired with your company professionals. Your camera may be fallen or being pressed from front side by someone. The new ZOOM will give the same best result and no further problems. ... Kodak Easyshare C813 Digital Camera

Lens Error my camera is giving error: 111,0,0,0 lens and then 221,0,0,0 My camera is Kodak EasyShare c633 please help me


Your camera is just stuck u have to bang it on something wood but not 2 hard or u will mess it up mtt camera was doing dat but when i did that it came back to working ... Kodak EasyShare C633 Digital Camera

When i turn my camera on it goes to a white screen and says lens error 111,0,0,0 then turns to black screen and says lens error 221,0,0,0...wuts wrong? i have a kodak easyshare c813, 8.2 mega pixels, 3x optical zoom if that helps at all


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Kodak Easyshare C813 Digital Camera

When I turn on the camera it says lens error 111,0,0,0 then it says lens error 221,0,0,0 then it turns off..can you please help resolve this problem?


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Kodak Easyshare C813 Digital Camera

Lens error No.111,0,0,0 and 221,0,0,0


Try these procedures. ... Kodak EasyShare C613 Digital Camera

I have kodak easyshare c613 camera wont work, it showing a code lens error 111,0,0,0 and lens error 221,0,0,0. what can i do to get it to work?


Maybe change a new lens will be ok ... Kodak EasyShare M1033 Digital Camera

My kodak easyshare c813 will not turn on. it says on the screen lens error 111,1,0,0 and 221,0,0,0. how do i solve this problem? please help


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Kodak Easyshare C813 Digital Camera

Lens error code 111,0,0,0,


This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Kodak EasyShare C633 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0177 seconds