Having problems with your Canon PowerShot G5 Digital Camera ?
Canon G5 Menu and function do no work
\015 I mave a canon G5 powershot.It takes pictures and the LCD is working but but the menu ,Set buttons do not work. The setup screen comes on and freezes. set or menu buttons will not change it. I switch to camera mode and press shutter release to clear the screen\015
Repair Help & Product Troubleshooting for Canon PowerShot G5 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Canon EOS 350D LCD Does't show Pictures, and can not take pictures. It does not work with CF card or without. all other camera functions work and the lcdd works for all menu functions. Things I tried I tried removing battery. Updating the firmware.
Sounds like a faulty CF card, or it's not been placed in the camera correctly. ... Canon Rebel XT / EOS 350D Digital Camera
Canon SD900 selection options not responsive. The selector wheel, Function Set button and menu selector only work from time to time. Even if pressing the ring brings up info to the LCD, nothing can be changed because the Function Button and the Menu button are not active. This is a random problem. Sometime, I can bring all functions back to life by removing and re-inserting the battery and restarting.
Sounds like the board has become damp and possibly corroded in certain parts this causing the random effect with the buttons their isnt much you can do unless you can remove the case yourself and give it a good clean but doing this is extremely diffi ... Digital Cameras
I have a canon camara powershot A590 Is and the following functions do not work: 1. it will not zoom 2. the menu button will not activate 3. you can not review the pictures taken 4.none of the functions work the only thing you can do is take the pictures
Is this a new camera? If yes then you can avail the warranty by bringing it to an authorized service center to save repair cost. If its out of warranty, then for the zoom problem, make sure you installed fresh/new batteries. If the problem is still ... Digital Cameras
My Canon 40D locks up when I click the shutter and the blue printer light next to the menu button is flashing. All the LCDs go blank and all functions stop working . Originally I was using a vertical grip and it still would not come on when I took the batteries out but after I detached the grip the camera did come back on . Now I'm not useing the grip and I still have take out the batteries and re-insert and turn back on camera to make function work again. Everything looks normal but the same th
... Canon EOS 40D Digital Camera
Canon G5 Menu and function do no work
... Canon PowerShot G5 Digital Camera
How to format an SD card on a Canon SD600 camera when the menu says "memory card locked." The memory card is in the unlocked position. When we put the SD card in another Canon camera (SD780 IS), it works fine, and will store a photo. It appears that something in the SD 600 camera itself is preventing the card from functioning. Can you offer a solution to this problem?
Could be that you have the wrong memory card.\012SD600 will only work with the old SD cards, but the SD780 will take the SDHC cards.SDHC was intended to give 4gb or more of storage, while the old SD started as 16 mb. Different camer ... Canon PowerShot SD600 Digital Camera
My Canon Powershot will take pictures like normal, but in view mode none of the functions work including: flipping through the pictures, deleting pictures, the menu button, etc. I powered the device on and off and i also removed the battery, but it still isnt working properly.
There are ribbon connectors on the inside of the camera, connecting button pads and switches to the main board. When they become sightly loose, they can cause this problem. You will have to service the problem, and find that loose ribbon connecto ... Canon Digital Cameras
Canon rebel xsi dropped screen is black photos don't register on card camera functions seem to work...menu shows up buttons work lcd shows settings when camera is turned on but when I depress the shutter a screen comes up black with 1/60 10 100/1898 any suggestions? Thank you.
You may have to send that to a repair centre as dropping digital camera's often shake electronic parts out of place inside. you should try removing the digital card and reinstalling it to see if that helps at all. ... Canon EOS Rebel XSi Digital Camera
Canon Powershot S1 IS has blurred image on both flip display and internal display (identical); menu graphics display fine, menu functionality (changing options) diplays and works fine.
Your Canon S1 IS has problem of CCD Imager Sensor and need to be replaced.Canon has announced free of cost repair scheme for such problem in S1 IS model.Click ... Digital Cameras
I have the Canon Powershot SD1200 IS. the functions: Disp., Menu, Func. Set do not work. nothing happens when i press them. When I hit the play button it keeps going through all my photos very quickly. and the 2nd green light blinks quickly. Not one by one manually. It doesnt matter if the camera is on auto or camera. nothing works. On the digital screen on the botton left there is a symbol of a rounded triangle with an S and bottom right there is 9999 when i change it to manual on the upper lef
Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera
I have a canon powershot SD200 digital elph camera. The metal piece on the back of the camera which moves the camera between functions (view photos to shoot video to take photo) no longer works properly all the time. Also, the clicker wheel that moves through different menu options or moves through photos being viewed doesn't always work. Are these problems repairable, and if so, where/how/at what approximate cost?
Hi,\012You will have to refer the servicing to a Canon Authorised service center near you. They will provide you with an estimate of the total repairing charges which depends on the extent of damage to the internal parts and the number of ... Digital Cameras
I have a 3 yr. old S2 IS Canon PowerShot(PC1130). I no longer get an image through the view finder nor the LCD panel. Recalled images from the memory card also are not displayed. Menu items are displayed and other camera functions seem to work. Batteries are fresh. Please suggest approaches to repair the problem? LB
Problems optical zoom canon PC1130 ... Digital Cameras
Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do
The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera
My new canon 7D is 2 months old. Today all the menu buttons stopped working. MENU not working AF DRIVE not working ISO not working....all of them....nothing. No access to anything. Changed lenses and still nothing????Can't view photos either ???
Follow the link.\015\012http://www.dpreview.com/previews/canoneos7d/page8.asp\015\012Make sure you unlock that key mention below.\01 ... Canon EOS 7D Digital Camera
Sd110 lcd My LCD did not work, canon repaired it....GREAT! but 2 weeks later it died. It was blank so I send it back and canon says they want money to fix. Damn.. It still takes photos with no problem. I cannot access any functions because the LCD won't work. I've tried the Display button and got the black and white screen of death. I have to take the card out to transfer photos. Canon says"UNIT HAS IMPACT/PRESSURE TO LCD". Do I need a new LCD or what. thanks, steve stokes
I have had my LCD screen go out in my small point and shoot as well, though i did not even bother with my company for the warranty was far expired. You could do a couple things. You could buy an LCD screen off ebay, or anywhere you can find it ... Canon PowerShot SD110 / IXUS IIs Digital Camera
Canon Powershot A75 problems ________________________________________ I have a Canon powershot A75 Digital camera its about a 11 months old and has a few problems now. 1. zoom doesn't work any more 2. any buttons like "menu" "func" "up/down/left/right" don't work anymore 3. unable to view pictures I've taken except the last one 4.Orange AF light on the front of the camera keeps blinking. I am able to still take pictures and download them to my computer but thats all. Has anyone else
Having read on a few sites about loose ribbon wires causing problems and having this same problem.\015\012I decide to take the camera apart. Taking all the screws out and fidling with the "wires" connecting the zoom control and the photo type selecto ... Canon PowerShot A75 Digital Camera
When I switch on my camera I get 'Err CF' on the display. According to the handbook I have to format the compact flash card - when it is formatted the menu will reappear - the menu does Not reappear bu 'Err 99' does. I have been on the internet and tried remedies suggested but nothing seems to work I am just being sent round and round in circles. My camera is a Canon EOS 20D, lens is a Canon Ultrasonic 75-300mm and my card is Sandisk Ultra ll 4GB
Things you can try:\015\012\015\012clean the gold contacts of the memory card;\015\012format the memory card through a computer using a memory card reader;\015\012rep ... Canon Digital Cameras
Daate Stamp We recently lost our Canon A95 camera and replaced it with a Canon A640. We cannot get the "Date Stamp" to work on the menu. We see it listed last on the menu. However the lettering is black (not white like the others) and we cannot get on it to turn "Date Stamp" on. You Camera User Guide is useless. Please advise how to turn the Date Stamp feature on. Franklin L. Finley at [email protected]
Some functions are not available in all modes.\015\012\015\012You have to select Postcard mode to be able to enable the feature (about Page 35). Postcard ratio is 3:2.\015\012If any other ratio is selected (e.g. 3:4) then if it were ... Canon PowerShot A640 Digital Camera
Reset option and clean sensor option are not visible in set up menu. Canon D20 I had a two spots that kept appearing in the same area of the photo so I looked at the manual and did the clean sensor function a couple of times and the spots remain. I had also done a reset all functions since my stepson gave me the camera and I wanted to restore it to its original settings. Now I don't see either the clean sensor option or the reset in the set up menu. Help!
First of all - great camera! Check out http://www.dpreview.com/reviews/canoneos20d/ for a lot more information on the functionality. The sensor clean functio ... Canon Digital Cameras
I used to be able to view a picture within the 10 second review timeset immediately after shooting with the 'zoom lever', however, this function is not working now. Any suggestions as to what i need to go to in the menu to get this function working again.... or is it a malfunction with the camera?
Sounds like the settings just got changed - to change the Review time setting do the following:\015\012\015\012-Press the MENU button on the camera\015\012-Under the camera settings menu (the tab with the camera icon), use the down ... Canon IXUS 80 IS Digital Camera
I have a problem with the Canon Powershot 850 IS. Most of the functions on the camera (Zoom, menu, display, menu and function set) are frozen and all I can use is the image capture button and the scroll wheel on the upper right hand side. Can you please provide me with a solution to this problem? Thanks, Robert
The issue here is the micro circuit board inside the camera overheats, from what i read canon is aware of this flaw and has repaired free of charge. But you do need to ether take it to a authorized canon shop or return it t ... Canon PowerShot SD850 IS Digital Camera
I have a Canon 85-15 with underwater housing. It flooded today while I was working SCUBA diving. . As soon as it got wet it stopped working. I am drying it now but it is not working. Is there any chance of getting it functional again? My work depends on it and I am far away from any regional centre. I am in a remote location in Western Australia.
Hi and welcome to FixYa,I think we both know where the Canon ixus 85 is stands as it is right now. Still, you may want to consider:\015\012\015\012ensure that the battery is removed and check ... Canon PowerShot S410 / IXUS 430 Digital Camera
Menu function not working
Take the battery out for while and replace it, to see if it 'resets'.\015\012If it does not then there is something you are missing- check the software Cd- there is usually a more detailed manual in PDF format.\015\012Failing that perhaps it is sick- ... Samsung Digimax A7 Digital Camera
Canon 400D Menu ,ISO,Preview Buttons not working
... Digital Cameras
I had purchased canon sx20is sevn days ago.it gives good services but one day a typical problems are arrised. zooming lever were not worked, menu optionn,set,display are not worked and also modes are not properly worked, in auto mode movie mode are activated. so i would like to get your sugession to solve these problem.
If this is a new camera and you are having so many problems in the first week, try to return it or, at least use the warranty to get the company to fix it. ... Canon PowerShot SX20 IS Digital Camera