Having problems with your Canon PowerShot G6 Digital Camera ?

Purchased a PowerShot G6 in 2005, and use it almost daily for product shots. The other day I accidentally hit the menu and changed something; I don't know what I did. Went back to default settings, now everything is 'grainy' and when I click the shutter, it sounds different than it used to... 'slower' is best way to describe.

Answers :

If u did a reset to factory setting then u have a hard fault in the electronics of the camera, most likely the CCD circuit, Canon doesn't sell parts to the public so the only way to get the camera repaired is to send it to a Canon approved repair center, they may also offer an exchange program for a reduced cost, they send u either another camera for a flat rate or offer a discounted rate on a new version of the camera. Consult your user manual for a customer service phone number.
Repair Help & Product Troubleshooting for Canon PowerShot G6 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Purchased a PowerShot G6 in 2005, and use it almost daily for product shots. The other day I accidentally hit the menu and changed something; I don't know what I did. Went back to default settings, now everything is 'grainy' and when I click the shutter, it sounds different than it used to... 'slower' is best way to describe.

If u did a reset to factory setting then u have a hard fault in the electronics of the camera, most likely the CCD circuit, Canon doesn't sell parts to the public so the only way to get the camera repaired is to ... Canon PowerShot G6 Digital Camera

My maxxum 7d will not release the shutter. I have set my af priority to release and have an empty 2g memory card so it's not those things. Everything else works well. There is an odd sound upon turning it on however, sort of a motor-clicking sound. Any suggestions?

... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b

... Canon EOS 40D Digital Camera

Nikon fm10 shutter will not click down to advance film. taking lens off camera and looking at inside of camera I can click down to lever to set mirror for next picture but pressing shutter button will only mover the mirror a fraction of and inch and it does not go back into position.

Have not worked on the camera since posting. Considering taking it apart just because I am annoyed. ... Digital Cameras

When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.

Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera

I just got a newer s3 pro my old 1 is s1 pro...I'm setting it up but the f (function) key and the p (play) key are not working ??? Everything is set to default as far as I can see. The camera is a pretty well taken care of model. The lcd image on the back instead of being a regular pic it is in colors of red/purple????? I'm lost !!! FPSTACK

Hi,Initially this could be a problem on the CCD part of the camera, it is better to take the camera out for repair. ... Canon PowerShot S3 IS Digital Camera

Error 99 I have a Canon 10D that worked fine for a little over a year, than I started getting Error 99's. You click the shutter button and nothing happens except an odd sounding click, and the "error 99" blinking in the LCD. At this point the camara is usless until you turn it off and than back on. This became more and more frequent until now I just can't depend on my camara any more. The problem, with my camara seems to have nothing to do with lens contacts or the memory card. I have search

1. Turn off the camera.\015\0122. Remove the lens, battery, and CF card.\015\0123. Allow the camera to sit without power for approximately 20 minutes.\015\0124. Insert a fully charged battery, and turn on the camera.\015\0125. ... Canon EOS-10D Digital Camera

My cameram each time it starts makes me have to chooose where i live the time and the month again, i just bought the camera a few months ago brand new. i did all the settings and click ok but when i power up it does th whole start up setting again, why is this happening. i tried seting to default but still nothing. i took the battery out and put it back in. still. any help would be great to ge tit to keeop the date and not start the setup again. its a casio exilim 7.2 megapixel ex-z75

The same thing is happening to me with my ex-z75. i don't know what caused it and i'm also having trouble getting it to stay. ... Casio Digital Cameras

Shutter When I press the shutter button and it takes the camera the screen goes black and stays then you hear a click and it will pop back up. Is there a setting I need to change?

Hi:\015\012Try this:\015\012Go to the menu and or setup menu. RESET ALL.\015\012See if the camera works right,\015\012If not, set the menu like you may choose, then test.\015\012\015\012If all fails, then there may ... Vivitar ViviCam 5100 Digital Camera

I have a Bushnell Trailscout 5.0MP night vision model #11-9935C. I go thru the set-up mode and everything appears to be OK, but as soon as I set it to the on position it defaults back to password. Sometimes instantly are after two are three pictures.

... Digital Cameras

My Canon 40D locks up when I click the shutter and the blue printer light next to the menu button is flashing. All the LCDs go blank and all functions stop working . Originally I was using a vertical grip and it still would not come on when I took the batteries out but after I detached the grip the camera did come back on . Now I'm not useing the grip and I still have take out the batteries and re-insert and turn back on camera to make function work again. Everything looks normal but the same th

... Canon EOS 40D Digital Camera

When turning off my D90 I have on the control panel showing ISO 1.0 in parenthesis and the letter K to the upper right of the 1.0 this remains on when the camera is turned off. I have tried everything that has to do with this setting and cannot get it to go away when turned off. Pulling the battery is the only option so far even going back to default settings has no effect....help

I'm assuming it's actually on the lower right corner. It's supposed to stay on, even with the camera turned off. All it's doing is telling you that the memory card still has room for a thousand more pictures.The power drain is so minimal ... Nikon DSLR D90 Digital Camera

My Pentax K100D has suddenly stopped working. It hasn?t been bumped or dropped or anything. A few days ago I was still taking pictures, and then a day or two later when I tried it, it wouldn?t work. When you press the shutter release button, nothing happens. No autofocus, no picture is taken, nothing. The only thing is that you hear a fairly rapid clicking sound, perhaps like a gear wheel turning or something. I tried various settings, new batteries, a different lens, autofocus, manual focus, ev

Hi there as per your mentioned sound or noise is says that the problem create by your camera lens guide pin. Its damaged or dislocate. So i also suggest you to visit the service center. Thanks.\015\012 ... Pentax K100D Digital Camera

K10d- not able to focus using half press on the release. The autofocus works on the back of the camera but not on the release, the shutter just fires. Tried exhanging lens and have reset camera to default settings, but good.

It means that your auto focus mechanism had damaged from inside. i will prefer you not to try to repair it your self as you may damage the lens also. please go to service personnel and let they do this for you & if it is under warranty it will b ... Digital Cameras

I have a new (3 weeks) D700 and while taking photos yesterday with camera and a 16-35mm lens, the exposure meter went ape. Pictures taken ok but ERR started to flash where shutter speed reading should be displayed in viewfinder. Tried everything, including resetting to factory settings, detaching and reattaching lens, checking switches, and then went home in despair. At home I switched to a 50mm lens and the problem disappeared. I put the 16-35mm lens back and problem seemed to have disappeared.

... Nikon Digital Cameras

I inserted a 4GB SDHC card, clicked ok when prompted. clicked "yes" when asked to set SD card as default. took the SD card out and put it into my own camera. my camera said there were no images on the SD card. the photo machine at my local Boots store also said there were no images on the SD card.Tried NOT setting the SD card as default and it still didn't save any images. What am I doing wrong??? vtech internal memory works fine. I just want a bigger memory capacity for the camera!!! From Hel

I assume that the camera is not compatible with SDHC cards and will only work with normal SD (upto 2GB) cards. ... Vtech Kidizoom Digital Camera

I was at a game shooting pictures with my Canon rebel EOS xsi a friend picked up the camera... started shooting pictures and when he handed the camera back the autofocus wasn't working and the shutter would only occasionally close. How do I get back to the original manufacturers settings... I think he may have played with the buttons when he was trying to get the shot... so th setting may be off... I'd like go back to the original setting and try it from there

Restoring the default settings is pretty easy.Please refer to page 100 of this manual(right-click here and click save target as to download) ... Canon EOS 400D / Rebel XTi Digital Camera

I have a bushnell 119512B digital land camera. i cannot set the date, i have set the other 4 but it keeps going back to default on the date

... Bushnell 119455c Digital Camera

I bought a second hand d70s. it seems to have a problem. the shutter release button does not seem to do anything when pressed half way (like auto focus). I can only get autofocus to work if i program AE-L/AF-L button to AF-ON. I press the AE-L/AF-L button on the back, then press the shutter to take the shot. And if i set the AE Lock On, pressing the shutter button half way does not lock the exposure setting. so there seems to be an issue with the shutter button itself...is there an easy fi

You need to press the button half-way first to allow an exposure reading to lock on to. ... Nikon D70s Digital Camera

Shutter When I turn on the camera everything is fine but the shutter wont open. Instead i have to use my fingers to keep the shutter open just to take a picture. I dont know how this happend. I use the camera for an hour and everything is fine then I leave it in its case for like 10 minutes and when i turn it back on the shutter wouldnt open! Please help! :(

You mean the lens protector doors, not the camera shutter. This seems to be a problem on this camera. Aparently you bumped it against something or dropped it. The only way I know of to fix this is to take it apart and set the arm of the spring again ... Panasonic Lumix DMC-LZ5 Digital Camera

My camera will not play back the sound with the image when it is playing back my videos. What is wrong? It makes the initial sounds for set up - but just will not play sound for video. When the video is sent to the computer, the sound is there - so I know it is recording. Thanks!

On the camera, go into the menu and select the setup. That's where you should find the option to turn on/off the video sound during camera playback. ... Digital Cameras

I need to know how to reset the resolution setting on my Fujifilm Digital Camera FinePix S5700/FinePix S700? Can you help me get the best quality? It isn't blurry, but I think it could be better. Maybe, I can't get any better than the settings I have already. What should my settings be to get the best quality pictures from this camera? Can anyone tell me, Please? Thank You, Vickie My pictures look perfect in the view finder, but come out on the computer as grainy.....also, my S setting does not

You can try checking the user manual for those settings this is the link for that http://www.fujifilm.com/products/digital_ ... Fuji FinePix S5700 Digital Camera

F-stop issues when i set the camera to the M setting on the dial, the only thing its letting me adjust is my shutter speed and ISO. I can't find a way to also adjust the aperture setting. I can do everything else, but not that. And if I switch to Av, I can't set my shutter speed.... help!

See pages 36&37 of the manual.If you haven't got one, you can download it here.In M mode...Turn the sel ... Canon EOS Rebel T2 with 28-90 lens 35mm Film Camera

Clicking sound My camera makes a clicking sound when I move it around...like it's a zoom issue. I took one back and got another one, but it has the same issue. The people at the store said it sounded like there was a screw loose inside the camera.

If you go to the Menu and click on the AF setting, change it to single AF and the sound should go away. It explains online that when it is on Continuous AF the camera is always trying to focus, which is what is making the noises. The sound does go aw ... Kodak EasyShare M380 Digital Camera

I'd like to set my Stylus 790SW back to default settings in hopes that my video feature will work. Right now the video doesn't record. It's just a picture. I've been messing with this camera for 4 hours and cant get this thing back to original settings. Is there a magic trick? If I send this to Olympus to be looked at, it will be it's 3rd trip since to the New York repair shope since I bought it 2 years ago.

Roll the dial to picture mode, press the menu button and you will see "reset" on the left. Select "Reset" and say "Yes" - this will reset your camera to default settings. \015\012\015\012Here's a link to the manual if you need more help:\015\01 ... Olympus Stylus 790SW Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2020 seconds