Having problems with your Canon PowerShot G6 Digital Camera ?

My Canon G6 screen just shut off. When I turn it

\015 My Canon G6 screen just shut off. When I turn it toward the front it comes on again. However, it will not work in the regular postion. Can it be cleaned? Or serviced? Or do I have to get another screen?\015

Answers :

\012\012try these:-\012\012
  • connect it to pc and on it
  • \012
  • vaccum the barrel of lens
  • \012
  • changing mem. card and batt. for 2min.
  • \012
  • shake it.
  • \012
  • on and off in different positions
  • \012
Repair Help & Product Troubleshooting for Canon PowerShot G6 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon A510 Powershot camera will not stay powered on when I turn it on in picture-review mode. It comes on for a second --> Canon screen flashes on -- and then shuts off. In picture-taking mode, it seems to be fine. It stays on. But if I switch to review mode, it turns off. I've changed the batteries. It was fine last time I used it, last week. I left it plugged into the PC for a few days, if that makes any difference.

These cameras have capacitors built into the circuitry. A capacitor holds a higher voltage so the camera will operate when in use. Some modes in these cameras do need a higher voltage to work. The capacitor for the review mode is weak and will need t ... Digital Cameras

My Canon G6 screen just shut off. When I turn it

\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot G6 Digital Camera

Canon SD4000 camera, when hitting the power button, the screen remains black screen, the green light blinks twice, lens zooms out, shutter opens. Screen remains black, and I do not seem to have any control at all; pressing the zoom button doesn't move lens, no notable reaction to anything. Hit the power button again, the lens zooms back into it's original position, shutter closes (occasionally does not shut completely), green light blinks twice, screen remains black. Tried turning on w/o SD card

... Canon SD4000 IS IXUS 300 HS Digital Camera

Black Screen The camera was never dropped. And, it worked perfectly just 1/2 hour before the problem occurred. Turn it on, Canon logo shows up, then black screen with 2 beeping noises, the screen says E18 and the camera shuts off by itself. Please let me know what the problem is. I am very frustrated about this!!! Many thanks.

Cannon will repair it free of charge,its a problem with ixus 400. ... Canon PowerShot S400 / IXUS 400 Digital Camera

My canon digital IXUS 60 is not working. It was going fine and then I turned it around to take a self portrait and clicked the button when i lokked back at the screen it was blank and i haven't been able to turn it on again using the on/off button, how do i start it again. it is like it has shut itself down and frozen.. help, its my dads and i dont want it to be broken....

Sounds like you accidentally pressed the display button which turns your LCD display on and off (to save batteries). Turn on your camera, and press the DISP button once in the lower left corner. ... Canon Digital Cameras

I was Importing some pictures to my computer from my Canon sd 1300 is powershot digital camera , When the Battery died , I was not in the room at the time , So I came back in and attempted to turn the camera on and it said "Please change the battery pack" which means I need to charge the battery , and When the camera shut off , The lens did not close . SO I charged my battery , and the next day , I put the battery back in the camera like normal and I turned it on , and on the screen it said "Len

Since your camera is new the priviledge of your warranty claims must not be lost. So do not tamper to lose this benefit but call up the call centre of Canon for registeration/advice. What you can do is to remove the battery and keep if off . Since th ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

I have a canon ixus 900Ti. I turned it on yesterday and the lens came out as normal. when i went to take a pic the camera shut off but the lense never retracted. when i turned the camera back on the splash screen came on, followed by a series of beeps and then and error message saying "lens error, restart camera". restarting has not solved the problem. its like the lens is stuck out. hope you can help Regards Liam

Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Digital Cameras

Canon power shut A520 - When I turn on my camara it stays on for only 30 seconds, the blue screen stays on and the lens part wont open ,its stuck,, then the camara just turns back off with ti ti ti noise , when i shake the camera i hear a tiny something loose inside ??? thank you very much for your help

Did you get it serviced lately ... Canon PowerShot A520 Digital Camera

Canon ixus 09is Turn camera on - yellow light appears - camera makes noises like its ready to go - screen doesnt work and it takes a few goes to turn it off. Even when the lens eventually retracted and stayed shut the yellow light stays on and the camera got very hot

... Canon IXUS 90IS Digital Camera

I was taking photos when suddenly my Canon PowerShot SD 1300 IS IXUS 105 read "Lens error. Will shut down automatically. Restart camera." Then the screen went blank. The lens will not retract. I cannot do anything other than turn the camera back on and get the same message. I've never had this problem before.

There is something wrong with your lens barrel. It can be anything from some sand/dirt that got inside in which you try using some canned air to blow out the particles while continually turning it on and off. Usually what it is from is the camera bei ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Broken zoom my daughter dropped my canon power shot s400 broke the zoom. it won't retract or come out. when i turned it on the screen shows E8 message then it shuts off after 2 or 3 seconds. Any way to fix this myself?? thanx.

The E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. ... Canon PowerShot A520 Digital Camera

Canon powershot A60. When the camera is turned on there is no image won't take shots, has a number on screen E18 and shuts down after a few seconds. Mike

E18 is an error code from self diagnostic system of the camera.if there is a malfunction in the lense assembly or the focus assembly then this error code appears. You have t show it at a repair shop. ... Digital Cameras

Canon 20d ,error code 99,shutter keeps firing rapidly, shut it off, removed batteries, but when you reinsert batteries it firea and when you turn it back on it continues to fire also I don't have a menu screen no more

... Digital Cameras

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18

E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

Error-C1 I was on holiday in dusty hot conditions when my second hand camara became unusable. I turned the camara on to take a photo and the zoom lens and shutter became stuck. The screen went blue and 'error-C1' appeared on the screen. Every time I turned it on thereafter the same blue screen came up and it makes a strange mechanical noise when I turn it on. It also turns itself off after a few seconds but the zoom still doesn't shut. The battery symbol still appeared but it appeared to be out

Dirt /dust in the lens and lens gear box ( this drives zooming only ) preventing optimum functioning. Lens cannot properly come on line ( shutter and diaphragh mechanism then do not come on line ) and the camera switches off. Solution : is ether repl ... Kyocera Finecam S4 Digital Camera

FLASHES C:13:01 When I turned the camera on, I looked at monitor to take picture and was flashing C:13:01-wouldn't take a picture. Shut camera off, turned on and got two pictures off. That was it. By shutting camera off and on was able to get to the review setting and viewed the 80 pics. stored; that was yesterday. Today I get the c:13:01 code on each camera mode and review setting only shows the 2 pics from yesterday, then blue screen, though as I push the review button the on screen picture nu

OMG!!! If you still have the camera, try this. I read in one of these forums to spray a burst of brake cleaner in there and blow dry for a few seconds and believe it or not, it worked! That's after me taking it apart to make sure the connectors weren ... Sony Cyber-Shot DSC-P200 Digital Camera

I have a Kodak ZD 710. Using rechargeable NiMH. Was taking a photo of a shiny surface towards the sun in 86 degree weather. Took 2 good shots when suddenly camera shut off. I turned it back on but it shut off again. Turned it on again and screen wanted me to change date format and then immediately shut off again. Next it would not turn on at all, no power. I changed batteries. Still no power. Removed batteries and 4 Gb memory card for several hours. reinstalled but still no power. Today is

Is the lens still sticking out? It usually retracts when it turns off. let me know ... Digital Cameras

Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five

Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera

My canon powershot a1000 when turned on, displays a black screen with icons. its not like this before. normaly when i turn it on, i can see the view from the lcd but now no more. but everything seems to work as normal except for the black screen after turning it on. my trick is to press DISP in order for me to see the lcd display.pls help. thanks

... Canon Powershot A1000IS Digital Camera

I have a Canon SD500 Powershot Elph camera that is about 2 years old. Recently on vacation the LCD screen stopped working properly. The screen is white with an asymmetrical black configuration on it. It's sort of like a piece of an umbrella--pointed edges and lines running through it. The camera will still turn on and off but nothing is available on the screen. Even though I paid $350 for it, I'm ready to just ditch it as Canon wants over $100 just to look at it.

Ditch it- They will want $100 just to tell you to get a new one. ... Canon Digital Cameras

I have an olympus stylus tough 6000, when I turn it on, I see the olympus name on the lcd screen. It then beeps several short spurts and it shuts itself down. I have charged different batteries and still on a fully charged battery, it does it still. When I turn the knob to view pictures, I am able to do this, but if I turn to take a picture or video it shuts down.

... Digital Cameras

Black screen i own a canon digital IXUS 800 IS and when i turn it on to auto or manual the screen is black with the icons white as normal and photos turn out black-tried pressing disp. button which worked for a while but now it just turns the icons off - tried resetting to factory settings and no change i help - please - dennis mannina - london

If your camera is still under warranty, the best thing you can dois to take it to the nearest official repair shop and Canon Digital Cameras shouldfix it for free.If your camera is out of warranty, or if Canon refuses to rep ... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

Hi, all of a sudden, my Canon Rebet XT gave me a faint flashing error 99 message. It won't turn off and the red light at the bottom right of the screen stays on even when I turn my camera off. I have to take the battery out in order for it to turn off. The led screen is blank and shows only the battery icon. HELP, my son is graduating from H.S. and I need to take lots of photos. Thank you.

To isolate the cause of the issue, we suggest that you do the following:\015\0121. Turn off the camera.\015\0122. Remove the lens, battery, and CF card.\015\0123. Allow the camera to sit without power for approximately 20 minutes. ... Canon Rebel XT / EOS 350D Digital Camera

Lens error I have an ixus 230 HS - I turned it on the other day & I must have bumped the lens or something, as it shut down. The lens stayed out though & wont close, when i turn it on it starts beeping at me & "Lens error, Will shut down automatically. Restart camera" comes up on the screen, it then shuts down again. I have removed the battery & the memory card, but to no avail.

... Canon Digital Cameras

Canon SD400 I dropped my SD400 and it will turn on, but the shutter will not retract. However, the screen comes on in color and then goes black and says no image. I can access the menu screen while on the picture taking mode. If I move to anything else the camera beeps three times and turns off. What should I do? Can it be fixed? Should I take it somewhere to get it fixed... and where can I take it?

Its very eas to fix this one.. \015\012\015\012just use a small screw driver and open it up.. \015\012\015\012its possible that the gears were just misaligned. \015\012\015\012got mine fixed..  ... Canon PowerShot SD400 / IXUS 50 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2968 seconds