Having problems with your Canon PowerShot G9 Digital Camera ?

Gentlemen: This weekend my G9 shows my earlier photos on my memory card fine, but the screen now shows everything in shdes of pink and a little green. I have reset the menu settings with no improvement. Please advise, Don [email protected]


Answers :

Hi!
The CCD is faulty. Contact your local Canon service center to find out how much does a CCD replacement cost.

Tom
Repair Help & Product Troubleshooting for Canon PowerShot G9 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Gentlemen: This weekend my G9 shows my earlier photos on my memory card fine, but the screen now shows everything in shdes of pink and a little green. I have reset the menu settings with no improvement. Please advise, Don [email protected]


Hi!The CCD is faulty. Contact your local Canon service center to find out how much does a CCD replacement cost.Tom ... Canon PowerShot G9 Digital Camera

Why is my olympus e420 taking green tinted photos? I bought a new camera which I received yesterday, and it was until earlier, but has suddenly started taking yellowy/greeny tinted images. I've tried changing the settings, I've changed the camera modes, I reset the settings altogether and even changed lenses and yet the camera still takes tinted pictures, inside and outside. Also, when I switch the camera to live-view mode (shows exactly what the lens sees) it shows pretty much an entire green s


Im having this same problem. I have yet gotten it solved.. have you fixed it yet? ... Olympus E-420 Digital Camera

Over exposure The exposure settings on the camera have suddenly become fixed - I can't change them either through fixing shutter speed, OEV, or any other settings. Even tried a factory reset by selecting 'initialize' from the menu, but the problem persists. High or low exposure settings are visible on the viewfinder (i.e. changing the settings shows the picture getting darker or lighter on the screen), but once the picture is shot, it's fixed at an overexposed state.


... Sony Cyber-Shot DSC-HX7V Digital Camera

When shooting with the D70 I get bright pink, yellow, and green in the bright areas. So far I have: -changed CF Card -changed battery -presses reset camera button -reset custom menu -checked hue and saturation settings


There may be some dust particles on your low pass filter .To check this have a fully charged battery in your camera .switch on the mirror lock up to on from the menu exit menu and press the shutter now remove the lens and inspect and blow any dust on ... Nikon Digital Cameras

I CAN'T GET THE DATE TO TURN ON. IT WILL LET ME RESET IT, BUT IT WON'T LET ME TURN IT ON. When I go into the menu setting, it shows that the date is turned off and I can not access another menu that will allow me to turn it on. I need to date stamp pictures for work. Thanks for your help.


The date/time stamp only works in "Postcard" resolution. Press the "Func Set" button, then scroll down to the bottom to select postcard resolution. \015\012\015\012Then press the menu button. Select the "Camera" menu, then scroll down to the th ... Canon PowerShot SX100 IS Digital Camera

I have a Canon Power Shot S2-15 (5.0 mega pixels) My husband was taking pictures in the house and the image stopped showing up on the view finder or the screen. One minute it was working, the next it wasn't. I am hoping he changed a setting or something that can be reset. All of the menu items still appear, but there is no image. What happened? I really don't want to have to buy a new camera before we go on vacation. HELP!!!


Just take out the batteries from the camera take out the memory card too and keep the camera idle for 15 Min replace the battery and try to use it if it works it is a memory card probs if not try to insert the memory card and try it should work ... Digital Cameras

Hi there. I have an Olympus E-510 that is about 3 years old. It's been working fabulous until just until recently. I connected the camera to my computer and downloaded some photos just like I always do with no problems - disconnecting it as I always do (USB). The next time I went to use the camera, the USB storage screen shows up and I can't get it to go back to the original setting to take photos. I can still download any images from the camera but can't get off that menu. I've tried the reset


I'm not really sure what's going on, but it could also be a hardware problem, or maybe ribbon connector inside the camera from the usb port to the main board, or maybe a bent pin in the usb connector.\015\012Check it out carefully, and remove t ... Olympus EVOLT E-510 Body Only Digital Camera

I have a Canon XTi that I can't use because when I push the shutter button a 9 with a green blinking light shows up on the right hand side at the bottom of the viewing window. I've tried turning the camera off, changing the batteries, resetting the camera's settings, nothing has worked. Please help!


... Canon EOS 400D / Rebel XTi Digital Camera

Reset option and clean sensor option are not visible in set up menu. Canon D20 I had a two spots that kept appearing in the same area of the photo so I looked at the manual and did the clean sensor function a couple of times and the spots remain. I had also done a reset all functions since my stepson gave me the camera and I wanted to restore it to its original settings. Now I don't see either the clean sensor option or the reset in the set up menu. Help!


First of all - great camera! Check out http://www.dpreview.com/reviews/canoneos20d/ for a lot more information on the functionality. The sensor clean functio ... Canon Digital Cameras

All the Epson DC-10s shows is little green and purple lines. It does not matter if I move it to another room, what VGA or what power cord I use. I have hooked it up to numerous projectors that have their own document cameras that are working fine. When I plug this document camera in, all it shows is little horizontal green and purple lines.


... Epson DC-10s Digital Camera

How do I get the date stamp to show up on the picture DMC Lz2 ? I've already set the clock in the settings menu. But the date and time stamp doesn't show up on the photo taken.


The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to pr ... Panasonic Lumix DMC-LZ2 Digital Camera

Date in camera menu resets to 00/00/0000 every time I remove battery to recharge it and meta data for each shot shows 01/01/1980 until I reset date in menu.


The back battery is faulty and it is important that to keep your date in order the battery needs to be replaced. You will need to open the camera to check the back up cell. ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Dark exposure I have a Nkon D40x. Setting the selector to Auto, Shutter or Appature(SP) the image comes out dark. The historgram shows a spike that is totally contained in the first quarter of the screen. When I use the manual setting the image improve as the shutter speed was slowed down (1/80sec and ~7f the image improves). Any guess as to what is happening?


Check your ISO setting...should be between 100 to 400 for normal pictures.Did you change your exposure compensation setting to something other than "0"? Is the aperture ring on the lens set to the "A" position? ... Nikon D40x Digital Camera

How do I set the start image? I've tried following the menu commands, but when I select "Start Image," my options are the logo, "off," and then a black box with a question mark. I've selected it, and it shows the option set for "user image," but no start image shows up when I turn the camera on.


After going through the menu and choosing user image, view the picture you would like to set as your start image. Press the button with the E on it that is underneath the zoom button. The screen should then show four images across the top, say the wo ... Samsung L200 Digital Camera

Dead Nikon D50 in mint condition... Changed lenses with the power off. Powered back on and no LCD, or any actions at all. Flash will not pop up, no shutter noise, no auto focus. No top menu, no back menu. Did the double green button reset and the hard (hole in the bottom of the camera) resets while both on and off, with and without batteries, with and without SD card and every combination. Tried different lenses, also without a lens. Tried with two additional Nikon brand, fully charged batteries


Sounds like a power problem. Try checking voltage of battery and cleaning contacts with a cotton bud and electrical contact cleaner $8 at repco. Had a similar problem with a pentax mini slr. Verdigris (****) on battery terminals is dynamite in low cu ... Nikon D50 Digital Camera

The camera is 2 years old, when turning on the power it goes to the date set,you can change the year, then it slides over to the month, but seems froze up, then the camera resets itself, if you skip the date set up, it shows a view on the lcd, but can't take a picture, and the camera resets again. My son borrowed it and took pictures snorkeling, so it may have gotten wet, but the lcd screen is not distorted as it was a year ago when I got water in it.


... Olympus Stylus 770 SW Digital Camera

Dead Nikon D50 in mint condition... Changed lenses with the power off. Powered back on and no LCD, or any actions at all. Flash will not pop up, no shutter noise, no auto focus. No top menu, no back menu. Did the double green button reset and the hard (hole in the bottom of the camera) resets while both on and off, with and without batteries, with and without SD card and every combination. Tried different lenses, also without a lens. Tried with two additional Nikon brand, fully charged batteries


Have you tried leveing it on with the battery in for a while ... Nikon D50 Digital Camera

Trying to connect my dimage z1 to Acer computer, won't open automatically like it does on my other computer. Can you help. When in control panel of programs it is showing as working but I can't see it. On camera showing usb connection and also when usb connected to computer little green usb sign showing at bottome of compter


HI,The autoplay feature is turned off.So to enable it please do the following.FOR WINXP:\015\012\015\012Double click on the My Computer icon on your Desktop until it opens.\015\012\015\012 ... Digital Cameras

Settings Is there a way to set my camera back to the original settings. My kids were playing around with it and now when I go to take a picture it is all fuzzy and distorted. I have tried in the menu but wonder if there is a reset button to do this. Thanks for the help


First check to make sure the kids fingerprints are not all over the lens. If the lens is clean, then your kids are probably not at fault. This really sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, incl ... Canon PowerShot A300 Digital Camera

When I turn on the camera the LCD screen no longer shows the settings. I can still take pictures and it shows the image on the LCD screen, and if I hit menu screen shows. Did I push something I wasn't supposed to?


That is just a setting. It turns off the lcd to save battery or when you want to just use the optics for sightiing/focus etc. Should be one of the menus that show up when you hit the menu button. You should be able to set it off as it is now or have ... Sony Alpha DSLR-A100 Digital Camera

The camera when switched on displays in the top lcd display 'Err' yet shows battery as fully charged. ive reformatted my memory card via pc. changed the lithium cr 123a batteries for new ones. fully charged the 4 x AA batteries. the aperture ring lock is set to 22 on the 28mm-80mm af nikkor d lens. i have it set to af and auto but have tried all other camera setting i can access. it will focus no problem yet will not allow me to do anything else. i cannot access the menu eg func, play, in


Hi.Err means that the camera is in fault mode. There is no code, so that the fault is generic. This kind of error is often associated with shutter problems or other loens error. If you have a spare lens, remove battery and test the spare ... Fuji FinePix S1 Pro Digital Camera

Blurry Pictures I have had this camera less than a year. I took it to the beach 2 weeks ago and the camera was fine. Crystal clear pictures. Then, on the last day of vacation, the pictures started coming out blurry. Even when I am preparing to take a picture the view finder is blurry. The camera is on auto focus and it is set to the shoot and click setting (little green camera). It didn't get wet at all. Anyone know if there is a setting that I may have touched or is this an internal problem.


You probably got some condensation on the lens from going in and outside. You should be able to go to a Wolf Camera or similar store and have it cleaned. ... Sony Cyber-shot DSC-W50 Digital Camera

My cannon ixus 130 is permanently blurred, i have tried resetting to factory setting using the menu


Time for a new camera. There is no reset hidden or otherwise. ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Close-up picture Hi! I purchased my camera to take up close-up pictures of handmade greeting cards. The cards are 4" x 5 1/2" with lots of little details. I'd like to show as much detail as possble. I'm not sure what the best setting are? I've tried using the flash, but the whole picture just glares out, the light bounces off of the card and makes a big glare in the center. Without the flash, the picture is too dark. Can you help me figure out the best setting to use? Or, what kind of lighting


Take photo under diffused light from sun inside the room or outdoor. Do not use flash. Try to use macro mode else adjust using manual focus(MF) mode. You will sure get a fantastic exposure.-G.Ganesh, Boisar ... Canon PowerShot S5 IS Digital Camera

When switched on, indicator light shows green then to red flashing then red continuously - unable to press shutter button or show menu


Your problem may be\015\012due to a buildup of corrosion on the battery contacts inside the camera\015\012preventing full battery power from flowing into the camera. Remove the\015\012batteries and wipe the camera contacts firmly with a dry cloth (he ... Agfa Easy Pix SP2 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1891 seconds