Having problems with your Canon PowerShot G9 Digital Camera ?

I GET EROOR WITH MY LENS WHAT TO DO - Canon PowerShot G9 Digital Camera


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot G9 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I GET EROOR WITH MY LENS WHAT TO DO - Canon PowerShot G9 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot G9 Digital Camera

Hello, I have a digital camera CANON PowerShot SD790 IS IXUS 9015. The lens started to come out as I turned the camera on and nothing was blocking the camera when doing so. But, suddenly it stopped and the lens is stuck and I can't get the camera to work. Please help. Thank you!!! Kristina.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

Hi, I have Canon PowerShot A95, Digital Compact Camera, when i switch on the camera it will beep a few times and the LCD will display a little E18 in the lower-left corner. The lens gets stuck in the extended position, and refuses to move either to focus the lens or to retract when powered off. would be great if you could provide some advice for rectifying the problem. thanks


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Canon PowerShot A95 Digital Camera

I get lens error, restart camera - Canon PowerShot SD1100 IS Digital Camera


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Canon PowerShot SD1100 IS Digital Camera

Get Lens " Error Re-start camera message." - Canon PowerShot SX100 IS Digital Camera


Hi.This is a common problem , generally indicated as lens error. The problem is often caused by dirt or dust in the lens gearsPossible reasons are :* Faulty lens mechanism or jammed lens (camera usually turns off b ... Canon PowerShot SX100 IS Digital Camera

Lens will not extend, gets LENS error - Canon PowerShot G5 Digital Camera


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. To start with try to blow\015\012compressed air around the lens cover so that if there is any dirt ... Canon PowerShot G5 Digital Camera

E18 error on canon digital camera s200 powershot dropped it and now the lens is stuck halfway out/in The lens will not open, it was not dropped. I get e18 error.


Canon Powershot's error E18 has to do with the lens: If it appears on a black LCD with E18 written on the corner, it is mostly due to the lens getting stuck while trying to extend. The camera will beep a few times and the LCD will display a lit ... Canon PowerShot S200 / IXUS 178 Digital Camera

Getting lens error restart camera message - Canon PowerShot SX100 IS Digital Camera


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min. ... Canon PowerShot SX100 IS Digital Camera

My Canon PowerShot SD850 IS has a lens that is stuck in the extended position. I get a screen that says lens error, restart camera, but when I try to connect to the software, I get a screen on the computer telling me the computer cannot detect the camera. Battery is freshly charged, and I get the little yellow bird picture on the camera when I turn it on. It beeps about 4 times, and then turns off. Is there a safe way to get the lens to retract?


Don't play around with that lens, you can do more damage to the camera and focus with some of the stuff people tell you to try. Your camera just needs to be serviced and you'll be working great again. The shop that specializes in service for the powe ... Canon PowerShot SD850 IS Digital Camera

Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five


Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera

Have lens off and can't get back on ... - Canon PowerShot A520 Digital Camera


It broke lol !!!!!! ... Canon PowerShot A520 Digital Camera

My wife dropped her Canon Powershot SD750 and we thought everything was OK. Then moments later when we tried to use it, the lens came out and then locked up and the screen showed 'lens error restart camera'. Since then, after numerous attempts to get camera to work, the camera still shows 'lens error' and the lens is always out and locked. Could you help?


HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will need to ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I have a Canon Powershot Digital camera just over 1 year and we turned it on the screen is all black now(started out 1/2 black-it flashes but no picture is taken- all settings are as they have been since we bought this camera from BestBuy. This is the 2nd Canon Powershot we bought in the past 3 1/2 years & it will be the last one. Can you tell me what I can try to get this fixed? Thank you. Karen from NC


Test ... Canon PowerShot A85 Digital Camera

Digital Camera Have a canon powershot SD700 IS digital elph ... "lens error ... restart camera" shows in the display and lens will not retract ... any suggestions?


The following blog outlines some repair options for a lens error:\015\012http://camerarepair.blogspot.com/2007/12/fixing ... Digital Cameras

Canon powershot SD700 IS len retract problem - Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera


... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

Canon Powershot Lens Error Restart Camera - Canon PowerShot SD600 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon PowerShot SD600 Digital Camera

Lens error in canon a470 digital camera - Canon PowerShot A470 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fi ... Canon PowerShot A470 Digital Camera

I have a Canon Digital Rebel XT camera using a 75-300mm telephoto lens. My problem with the lens is that at times it is hard to adjust the focus either manually or automatically with the camera. I hear something rattling around inside the lens and at times the lens will not auto-focus and I have to remove the lens and manually twist it to get it back to some normal operation. Is this fixable or do I need a new lens?


It sounds like the lens has been dropped or knocked and is misaligned in the guides.Repair against new lewns is a difficult one as prices vary. I would perhaps consider replacing it with a used one. Before you do borrow a similar lens from some ... Canon Digital Cameras

Lens error my camera model is canon powershot SD770 is digital elph i dropped my camera and a message is displayed as lens error i tried to restart my camera and again the message is displayed as lens error please give me a solution sir please


I've had similar problems with various versions of this camera. Here's \015\012the fix, if all else fails. These are step-by-step instructions to take \015\012apart and fix the camera's lens error. \015\012http://johnsmouth.wordpress.com/2010/12/01/l ... Canon PowerShot SD770 IS / IXUS 85 Digital Camera

How can I fix this issue with the camera, on the canon powershot sd750 digital elph 7.1..lcd reads lens error restart camera


Try these procedures. ... Canon PowerShot SD550 / IXUS 750 Digital Camera

I was Importing some pictures to my computer from my Canon sd 1300 is powershot digital camera , When the Battery died , I was not in the room at the time , So I came back in and attempted to turn the camera on and it said "Please change the battery pack" which means I need to charge the battery , and When the camera shut off , The lens did not close . SO I charged my battery , and the next day , I put the battery back in the camera like normal and I turned it on , and on the screen it said "Len


Since your camera is new the priviledge of your warranty claims must not be lost. So do not tamper to lose this benefit but call up the call centre of Canon for registeration/advice. What you can do is to remove the battery and keep if off . Since th ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

My canon powershot a590 camera lens is stuck. When I attempt to start my camera I get a message saying Lens Error Restart Camera then the camera immediately powers off.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot S2 IS Digital Camera

When i press the power button to turn on the camera, the lens does not come out as it should - I get a "Lens Error - will shut down automatically - restart camera" appear on the screen - My Camera is the PowerShot SD1400 IS Digital ELPH - I have only had this camera for a few months


See Lens Error ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Lens is open and won't retreat back inside. I turn the power on and makes a funny clicking noise like its trying to retract the lens back in. After three seconds of this it says "lens error, restart camera". Its a canon powershot SD790 IS digital elph with image stabilizer. Canon PC1261...don't know if that helps.


I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/ ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

Troubleshooting problems I have a canon powershot s60. I tried to take a picture earlier and the screen is completely white. The camera turns on, the battery is fully charged and there is nothing wrong with the digital card. THe camera wasn't dropped nor did it get wet. I keep trying to turn it off and on, but all I get is a white screen. No images. But there are 900 images on the camera card and i just used it this morning. Please help. Thanks, Shannon


Take a picture with the camera and download it. If the pictures also shows up white then this probably is a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's w ... Canon PowerShot S60 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6130 seconds