Having problems with your Canon PowerShot G9 Digital Camera ?

Canon G9 camera and G7 similar problem... checked out memory cards and they were reformatted. cards work fine in other digital carmeras I own. Can not get either camera to read a memory card

Answers :

Usually this means there is a problem with the memory card part in the camera that reads the card. When this happens it will usually say either memory card error or card locked, even when the card is fine. Try emailing this site for help with this: www.camerasandparts.com All they help with are the Canon Powershot cameras and they're excellent for help with these models. Good luck with it. They'd be the place that could help with this.
Be sure the cards were formatted in the G9/7, not by another device.

Does the camera format the card and register it's presents?

contaminated contacts are the other most likely cause. Insterting and removing a few times often corrects problem. If not, Avoiding static, clean the card with 90% isopropyl on a static-safe foam swab.
Repair Help & Product Troubleshooting for Canon PowerShot G9 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon G9 camera and G7 similar problem... checked out memory cards and they were reformatted. cards work fine in other digital carmeras I own. Can not get either camera to read a memory card

Usually this means there is a problem with the memory card part in the camera that reads the card. When this happens it will usually say either memory card error or card locked, even when the card is fine. Try emailing this site for help with this: ... Canon PowerShot G9 Digital Camera

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"

Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras

Hi good evening; i have a casio exifilm digital camera.. when my old memory card got full i decide to change another new but unfortunately the old memory cad got stuck..the repairman said that the lock of the said storage got broke.. so he repaired and he get the memory card by opening my camera.. but on that time i knew that my carmera were alright and nothing problem about the lcd or lens etc..on the time that the repairman got the memory card inside my digicam does not functioning at all..he

Welcome to FixYa.\015\012\015\012I just want to ask if have you tried to check if the battery is completely charged before trying to use and checked the new memory card?\015\012 * try to use a new fully charged battery.\015\01 ... Digital Cameras

I received a Sanyo VPC-E1292 digital camera but the camera will not format or read the memory cards. I've tried three different cards and nothing works. I've also tried to format it using my computer but nothing is happening. I'm wondering if perhaps what else I can try to get this to work.

HelloOk, if you tried diffirent memory cards in the camera with all giving the same error, and tried all of these cards in the computer as well, it is most probable that the problem is with the memory cards.Have you tested thi ... Digital Cameras

Missing pictures I recently went on a trip and took some pictures that disappeared from my camera. Later I started getting the message 'Card cannot be read' so I purchased another memory card. I was taking pictures when I get the message 'Card cannot be read'. I turned it off and back on and the missing pictures were there. I then get the message 'Out of memory'. I turn the camera off and back on and the missing pictures are gone again. WHERE ARE THEY???

Hey flowernthe,\015\012 The error message “card cannot be read" means there was and error when the camera tried to access the memory card. To fix this you should make sure you are using the right kind of memory ... Nikon Coolpix 4600 Digital Camera

Pentax A10 Have a three month Pentax A10 digial camera, with no previous problems. It now cannot read the SD memory card and won't take pics when the memory card is in the camera. This memory card will work in other cameras. Able to take a photo when the memory card is out of camera. Tried a different memory card - same problem. This happened after I took the card in to Walgreens to get some prints made. Can taking the card out of the camera and putting it back in damage the part of the camera t

Try another card in your camera but check the inside the card holder that you have not got a damaged connector in there. and format the card with the camera and not on pc. Hope that help you.jam ... Pentax Optio A10 Digital Camera

I uploaded my pictures from my memory card onto the computer. When I put the card back into my camera, the camera won't read the memory card and it says the internal memory is full (12 pictures). How do I get the camera to read the memory card?

If you indeed have the pictures on your computer (and are safely stored)... you might try selecting the format memory card function in the camera, to reformat the card, in case it was somehow corrupted while connected to the computer. ... Kodak EasyShare M853 Digital Camera

When I put the memory card in the camera it says 'cannot read' it. How do I format the card? I know it has the right 'size' memory. The memory card I am using is the same one I used a few months ago and I saved the pictures I took to a computer and erased the pictures off the card. Now as soon as I turn the camera on it says 'This card cannot be read'. Im frustrated as there is nothing in the manual that seems to get my camera working again. I have only had it for a year. Please HELP!

Do not use the computer to erase the card. This is the reason your camera no longer recognizes the card. Now you need to format the card in the camera to get it to work properly. ... Digital Cameras

Hello Sir.Madam, I have DSC-H10 digital camera. It is having memory of type "Memory Stick Pro Duo". This card was working fine till the day. To transfer images to my PC, I have accessed this card to SD card reader and then after I inserted this memory card again in camera. Now I am Getting error "Reinsert the memory Stick". I thought that card may have corrupted but I can access it by SD card reader. Also I have formatted it in FAT format and then tried to use in camera but still its not work

Your problem is that you have formatted your MemoryStick from your computer. Your Sony camera uses its own proprietary formatting method and does not understand FAT32. You may also have corrupted your memory card if you didn't click on "safely remove ... Digital Cameras

I just got a kodak digital camera easy share M380 and i do not have a memory card but took a few pictures out of the box.I can not delete them and have tried 100 times and read the manual over and over.Can you tell me how to get these 10 pictures off of my camera please..Thanks PS it has a delete button at the top but i push it and nothing happens.

Without a card in the camera, go into the menu and find "format"...follow the on-screen instructions. ... Digital Cameras

My digital camera does not read my memory card anymore. When I turn on the camera it shows only the internal memory even though I have a 2g sd card installed, used to work fine, I tried other cards and they don't work either but read just fine on my computer or other camera, help!!!

... Nikon COOLPIX S230 Digital Camera

I have a gateway DC-T50 digital camera. I put in a new 2GB SD memory card, formated the card, but when I go to use the camera I get error msg i inserted a new 2GB SD memory card, I formatted it, but when I go to Auto mode I get a message 'this card can not be used'

Is it an SDHC card? SD and SDHC cards fit the same slots, but many cameras won't work with the SDHC (high capacity) cards. SDHC is not backwards compatible. ... Gateway Digital Cameras

When I install a memory card in my camera I get the message read only memory card, remove write protection to capture or write to card. The switch on the memory card is in the correct position, this is a card that I have been using with no problems until now. I also installed a brand new memory card and got the same message. I think there's a problem internally with the camera.

... Kodak EasyShare Z740 Digital Camera

I bought this camera off of an realestate agent, she said it wasnt very old and that it worked great, it didnt have a memory card in it she said i would haft to get one. I have gotten 3 differnt ones and they all say it cant be read. I talked to a walmart associate and she thought I needed a 1 gb memory card for that camera so I got one off line and it still does the same thing. I put the same memory card in another camera and it works just fine. I have this nice camera and I cant even use it

Your camera is only supporting: SD/MMC up to 1 Gigabyte\015\012The card that you currently have might be high speed HHC. All should be sorted if you change the SD card to the supported MMC SD card. ... Kodak EASYSHARE CW330 Digital Camera

Memory card I recently bought the Pentax Optio T10 digital camera and I'm trying to get/use the correct memory card. Can't seem to find online which card(s) work with this camera. I have a Patriot 4GB SD card and it doesn't work, I get a "Card Error" message on my screen. Does this card fit this camera? If not what cards will? Thanks! Charles

Hi and welcome to FixYa.\015\012\015\012Your camera will not work with an SDHC card. It must be an SD card. \015\012Don't forget to format the card in the camera after you install it. Elsewise it won't work properly.\015\012 ... Pentax Optio T10 Digital Camera

My camera will not read my memory card anymore. It is only using the memory from the camera. How can I get it to read the memory card

Confirm first whether the memory card is still good or bad by using a card reader, put the camera memory card into the card reader then connect it to your system, see whether the system will read your card, if the system doesn't read it, it simply im ... HP Photosmart M417 Digital Camera

Memory card gets stuck in slot-won't come out easily. Also, camera will no longer work (take a picture) when memory card is in--- reads "memory card error". Camera will take a picture when there is no memory card.

... Aqua Pentax Optio S12 Digital Camera

Cannon SD1100 IS Digital Camera The Camera reads " Card Locked". The Maual's solution is to slide the switch up on the memory card. Did that still won't work. When I go to the Menu, the cursor will just bypass the "erase" and will light up below the erase display. Have never had this happen. I was trying to erase a movie, and this locked up. Tried another "card" the camera still reads "card locked". It has to be something in the camera. Thanks for your help.

There are several possible causes for "memory card locked", "memory card error", or "no memory card". The most common is trying to use a 4GB or higher SDHC card with an older camera made before SDHC format came out. Other causes include problems with ... Canon PowerShot SD1100 IS Digital Camera

I have a Panasonic DMC FZ7 digital camera. I recently bought a new 4g memory card and when I turn the camera on I get a message: MEMORY CARD ERROR PLEASE CHECK THE CARD. I used this card in a video camera and had no problems so I don't think it's the card. Any advice?

I think the problem may bethat you are using a 4Gb card. The manual says not to use a card larger than 2Gb. ... Panasonic Digital Cameras

When I insert a memory card into my pentax camera, I am getting a memory card error message. There are pictures on the memory card. The card works when inserted into another digital camera.

HelloOk,\012 here is something that just might work.In your case the problem\012 is not with the card but rather with your\012camera's card reader. This is a rather hard problem to fix yourself but\012here is what you ca ... Pentax *ist DL Digital Camera

Memory card errors. I turn it on and get message MEMORY CARD ERROR PLEASE CHECK CARD. Occurs on different cards. Sometimes I can clean the contacts on the card and it will work. Sometimes, I can take pictures but if I remove the card it cannot be read if install it back or by a computer or printer. I use the camera as publicity in trade shows taking then printing pictures, so the cards are removed and inserted constantly. I have reformatted the card in the camera, still fails.

Hi wait a moment pls your request is been proceeding.. ... Panasonic Lumix DMC-FZ18 Digital Camera

I have a Canon Digital Rebel XT / EOS 350D Digital camera. Camera is not reading memory card, it says memory card error. Can this be fixed? or where can Itake it toget it repaired.

CHECK OUT THIS MANAUL FOR HELP!!!\015\012\015\012http://www.usa.canon.com/uploadedimages/FCK/Image/White%20Papers/R ... Canon Rebel XT / EOS 350D Digital Camera

Sony DSC-W120 Digital camera Problem: The camera can not read the memory stike. When I insert the stike again, the light beside the slot flash red lights and then go out. But the same memory stike can be read by the card reader on PC. So which one is wrong, the camera or the memory stike?

When i switch on the power button to take photo "E:91:01" code and flash symbol blinks on screen and flash \015\012does not work also.plz let me knw solution for this waiting for reply.M talking about my sony cybershot digital ... Digital Cameras

Sd memory card- on camera reads card error I took some pictures off my computer put them on my SD card to view in my camera. They are pictures I had take on the same camera, but I am getting read error. Looking for whats going on???

Sience they are on your computer try to format the card with the camera. see if you still get the error if you do then try a diffrent card if the camera is still having the issue then you problem lies in the camera's card reader writer. and the main ... Fuji FinePix Z10fd Digital Camera

My m1033 won't read the card and only lets me take 6 pictures and then says the internal memory is full. I get the pictures off the camera and card by connecting the camera to my computer, not with a card reader. But it won't let me get the pictures off the card anymore. Just happened yesterday. I removed the card and battery, and replaced them but that didn't help. Any help would be appreciated. Thanks.

First, promise you will never use the internal memory again. Go ahead...promise. Now, do this:\0121. Download any pics from the internal memory you want to save. Then, with no card in the camera, go into the menu and find "format"...follow the on-scr ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5154 seconds