Having problems with your Canon PowerShot S1 IS Digital Camera ?

Canon power shot s1 is our camera suddenly ..

\015 Our camera suddenly stopped being recognized by the computer. It takes pictures just fine but the computer is no longer recognizing the camera. We've tried it on other computers and are having the same problem. We've tried a new cord to connect to the computer and it did not make a difference.\015

Answers :

It is possible your USB connector has been damaged on the camera. This should be a relatively cheap fix however sometimes the circuit could also be damaged by a spike of power comming from the computer side. If it is found to be the later, you could be up for more than a new camera is worth. I would recommend purchasing a USB Compact Flash card reader to access your images off the card directly. They are relatively cheap to purchase from a computer store and easy to setup. Good luck.
Repair Help & Product Troubleshooting for Canon PowerShot S1 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon Warranty I purchased camera canon Power shot A60 on 9/4/2007 and all of a sudden it didn't take a picters any more. I think I still have one year manufacture warranty. I don't know where to send the camera


I have the same problem... The composition of CCDs on several products of different brands have the same problem (heat and humidity will damage the chip). Contact a SERVICE CENTER OF CANON in your area and request instructions. They have to replace/r ... Canon PowerShot A60 Digital Camera

Canon power shot s1 is our camera suddenly ..


It is possible your USB connector has been damaged on the camera. This should be a relatively cheap fix however sometimes the circuit could also be damaged by a spike of power comming from the computer side. If it is found to be the later, you could ... Canon PowerShot S1 IS Digital Camera

Canon S2IS Either screen is dark when I power up the camera. I can see previous images but I cannot record anything. Sometimes I can reboot the camera and it will work for a shot or two, but currently even that does not work. I have changed batteries with no good results. They power up everything but do not affect the recording of pics. Jeff Canon S1IS have problem with dark screen... I have a brand new Canon PowerShot A560 Digital Camera. I put in brand new batteries. On after shooting n


Your camera has the know issue of Stuck shutter, whichhappens after some time (weeks or months) thata camera is notused.\015\012\015\012Unfortunately the repair of it requires a complete disassembly of the camera, including the lens, fix ... Canon PowerShot A560 Digital Camera

My camera and computer won't link up. What did I do wrong? I installed the Canon Digital Camera Solution disk. I restarted my computer. I attached the camera to the laptop via supplied cable. I clicked on program, Canon Utilities and clicked on each of the three camera windows. I get the response camera not found each time. I unloaded and reloaded the software, rebooted the system and got the same thing. Any idea what I could be doing incorrectly? Thanks. I have the Canon SD890 IS Power Shot.


Try going to my computer and see if it shows up as an external drive.\015\012That will tell you if the software. ... Digital Cameras

Hi, I have a Canon Power Shot G10, Serial Number 7021002939. I'm making the first ever attempt to download photos from the camera to my MacBook Pro. I wish to use iPhoto to download to the computer. I have plugged the USB cable into the computer and into the digital terminal of the camera. I have pressed the Playback button. FYI, I have also downloaded the Canon Digital Camera Solution Disk. The Canon program will not download the photos, either. Nothing happens. I have trie


1. With the camera on and in playback mode, plug the cord from the camera into the Macbook. It should appear on the desktop as a drive, probably called "no name". If it doesn't, don't worry...the next solution always works and it's the one the pros u ... Canon PowerShot G10 Digital Camera

Hi, I have a Canon Power Shot G10, Serial Number 7021002939. I'm making the first ever attempt to download photos from the camera to my MacBook Pro. I wish to use iPhoto to download to the computer. I have plugged the USB cable into the computer and into the digital terminal of the camera. I have pressed the Playback button. FYI, I have also downloaded the Canon Digital Camera Solution Disk. The Canon program will not download the photos, either. Nothing happens. I have tried t


Do what the pros do....use a card reader instead of the camera. When you plug it into the USB port, an icon will appear called "NO NAME". Double-click on it and the pics will open in "preview". From there, you can import them to a folder you create o ... Canon PowerShot G10 Digital Camera

Own a Power Shot SX100 IS Canon camera. Camera won't work...am getting mesage, ¨lens error. restart camera''. When I go to the User Guide it tells me I need to contact a Canon Customer Suport Help desk as there may be a problem with the lens. I can't find contact information so am googling Canon and got this service. Can you help me?


Try the procedures in this tip. ... Canon PowerShot SX100 IS Digital Camera

I have 2 Canon Power Shot 70 cameras (one was a gift) The oldest I have owned for approximately 4 years...the other one slightly less. About one year ago while on vacation, the camera refused to take photos....all I got on the screen were a series of light pink-lavendar horizontal lines in a black background. Last week while at church camp the other camera did exactly the same thing!! Consumer Reports is recommending a Canon camera and at this point I am "gun-shy"! Do you have any suggestions?


Yes it is a design flaw, basically what happend is the image interpereter and preprocessor are shot.. The integrated method of the design leaves the irrepirable.. I dont use canon products except for printers and scanners when it comes to camera's i ... Canon Digital Cameras

What do I set my camera on to take great shots of a reunion and what do I set it on so there is not such a time delay between shots...it seems it takes too long for my camera to get ready for the next shot and I am missing out. I have a Canon power shot A720IS


Why it takes long between the shots is because of the size of the file to be saved. So, to take pics faster reduce the size by reducing the resolution. Which you dont want as you want great pics. Choice is yours. ... Digital Cameras

No power I purchased a Canon 400D about a year ago and shortly afterwards the camera suddenly gave up on me. I took a couple of photos and then nothing. The battery was fully charged and the power light came on when the camera was switched on and remained on even when the camera was switched off. I was going to take the camera in to a service centre a few weeks later for repairs but when I switched the cameraon again, the problem seemed to have disappeared. Since then I have been taking photos w


This definitely looks like an issue with the Camera. I suggest contacting the Camera Tech Support immediately and request them to send the Camera to the service center. There are more Canon Rebel XTi owners, including me have experienced no-power iss ... Canon EOS 400D / Rebel XTi Digital Camera

Canon S500 how do you load photos from canon S500 onto lap top c omputer. Have just purchasede usb cable. one end to camera and other to computer. I am a pensioner and a bit lost in this area. the camera is a canon ;power shot S500 digital elph


After installing the software that came in a cd along with your canon digicam...open that software...there will be IMAGE CAPTURE tab...when u click it ,the photos will be transfreed automatically from your cam to laptop ... Digital Cameras

The lens on my Canon digital camera will not close... i am unable to take a pciture and do not know the reason for this....when the camera is put on i am able to see my old pictures but when i click to take a new picture the screen is blank..i dont know what to do...please help...i have the canon power shot sd 500 camera and the problem that appears is the E18...... please help me


OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Canon PowerShot SD500 / IXUS 700 Digital Camera

My LCD screen on my Canon Power shot G3 is blank (just white). There are no icons; no viewing of things I wish to photograph. I called customer support they said there was no problem with the CCD image sensor on G series cameras per the Canon service letter of 10/6/05.I would have to pay about $135 plus shipping to get it fixed or trade for another camera which would cost me money also. I'm not happy with this because I assumed that Canon would fix the problem if it appeared on the G series. Ple


If the CCD were bad and everything else OK, you would see all the icons on the LCD (viewing screen), and you would be able to see images on the memory card that had been taken in the past while in Replay mode. The service letter you refer to covers r ... Canon Digital Cameras

I have Canon Power Shot A460 and I am experiencing some problems with my digital camera. Actually the pics shot with the camera are completely white in sunlight and there are stripes and bluriness when pics are shot inside. If the pics are taken in a complete dark room, they are well and good. Please let me know how to solve this


HI there reset the camera setting and make sure the exposer setting is maintain on center/ middle position. After that if you face same problem then you need to visit the camera repair store for repairing the camera CCD unit. Thanks. Waiting for your ... Canon Digital Cameras

Camera FX35 was working fine. In middle of taking pix in Oxford, screen suddenly refused to come back on, although optical viewfinder works and on screen viewing of taken shots works OK. Is there a power-saving feature I accidently turned on? Only have the simplified manual with me and am new to the camera. Tried my spare battery but same results. I can continue to take shots via the viewfinder and shots seem to work, but I really want the screen back -


The [AUTO LCD OFF] of the [ECONOMY] mode is active> Press the shutter button halfway to cancel these modes.Charge the battery or replace it with a battery which has enough capacity. ... Panasonic Lumix DMC-FZ7 Digital Camera

Recnetly while doing a photo shoot, the camera which is a Canon Rebel XP suddenly began to take shots that showed only the very top of the shot with the remaining showing all black. Initially, I thought perhaps it was the battery but have tested that and it's not the problem. This particular camera has had approximately 10,000 photos shot from it. Any ideas?


2 possibles...\015\012\015\012Most likely is the auto focus sub mirror retaining pin has broken, not an easy fix but possible if your careful.\015\012Lift the mirror and see if the small mirror ... Canon Digital Cameras

Canon A400 Hi, I have the above camera (canon power shot A400) and have just solved the E18 error by tapping the plastic A/V out cover - THANK YOU ! However, now, although the camera turns on, lense extends and I get full working order - after a few minutes I get the message 'Change batteriers'. and the camera dies. I have now put in several new batteries (including the little(cr1220) but the same message keeps coming up and the screen and the whole thing dies after a few seconds. Is this a furt


Having using standard LR6 batteries in a Canon before you will only get 3 or 4 pics max before it drains the batteries. You really need high power AA's like 2300mAH+ rechargeables for any good performance or Lithium AA's ... Canon PowerShot A400 Digital Camera

I have a Canon digital camera PC1182 or Canon Power Shot A700 and I am unable to transfer photos from here to my computer as the computer cannot find the Camera. Please note the Canon is spelled with one n. Barb Garrety


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Cannon Digital Cameras

I have a Canon Power Shot SD790 IS Digital Camera Problem


I was able to solve this problem by going on the Canon site and using their support. ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Artifacts in images from Canon Power Shot A710 IS digital camera


If the camera had been dropped could be a lose connection, os some broken contact after the shock.The camera must be taken apart to know the cause of the problem, and this will cost money already.If the camera received a shock ... Digital Cameras

I do have a canon digital camera model - Power Shot SD 1200 IS DIGITAL ELPH (DIGITAL IXUS 9515).The digital camera solution disk has been misplaced.Therefore download of it's software could not be done on my laptop.With the result,I am unable to transfer shots on my laptop for further use.Is it possible to download the software through internet to ease my difficulty? My e-mail is [email protected] u will help me out, early.-----P.K.Shrivastava,Bhopal,(M.P.).INDIA


You can always use a separate card reader to download your pics to a folder you create on your desktop. ... Digital Cameras

I have a Canon Power Shot S300 Digital Elph and use the Canon Digital Camera Solution Disc (Ver. 4.0). Part of this software is ZoomBrowser EX 2.6 which I use to download the photos from my camera to my computer. Recently I started getting the error message "There is not enough free memory to perform the operation". I have removed all of the photos from all folders and have also uninstalled and reinstalled all of the Solution Disc software but still get the above error message. This will not all


Memory errors are either free space on the C drive, Virtual Memory on C drive and almost always not related to your RAM.To check for Virtual Memory size in your PC, Right click My computer, click on the Advanced Tab, then click on the Per ... Digital Cameras

I have installed the software on my computer for my new Canon Power Shot A11001S digital camera. However, when I click on transfer untransfered images the images do not transfer and instead I get a message that reads: Canon Utilities Camera Window has encountered a problem and needs to close. What should I do?


Hi,\015\012\015\012You can download pictures from your camera to your computer by using a memory card reader (You can use your computer's built-in memory card reader, if it has one, or you can purchase an external memory card reader as sh ... Digital Cameras

I need to know the address of a service station for Canon cameras within Metropolitan Toronto. I have a Canon Power Shot SD500 camera that needs some fixing (screen cracked and needs to be changed). Could you give me phone # & street address of the service station. Thanks, sir/madam!


Hi,\015\012Please locate nearest canon service center by entering zip code at Canon Service. ... Canon Digital Cameras

I have the sd1000 power shot canon. i was taking a picture the camera took the picture as normal but when trying taking another shot i got an lens error restart camera.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot SD1000 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6574 seconds