Having problems with your Canon PowerShot S2 IS Digital Camera ?

1.After Switching on the camera the object does not appear on LCD

\015 1.After Switching on the camera the object to be shot does not appear either on LCD monitor or view finder. 2.Batteries get depleted very fast.\015

Answers :

Repair Help & Product Troubleshooting for Canon PowerShot S2 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

1.After Switching on the camera the object does not appear on LCD

... Canon PowerShot S2 IS Digital Camera

I am looking to buy a olympus m9010 camera. When you switch on the camera the date and time settings appear. If i don't set it, it will appear every time i switch the camera on. So i wanted to know if i set the date, time, year settings will that display when i transfer to my pc and when printing or it displays only on my camera LCD. i have this doubt because whatever is displayed in lcd will be the same when you transfer to PC. Hence please clarify. It will be better if you answer to the modeln

... Olympus Digital Cameras

Err 02 When i switch on the camera the EOS appears on the lcd screen other than that it is blank. After a while an error 02 appears (CF card fault). I have tried previously working cards and they all do the same. The manual says re-format the card but as the lcd screen is blank, this is not possible. The battery is fully charged. Is this a problem with the camera or the card.. My gut feeling says it's the camera.. Please help, Thanks...

Hi,If we talk about Error 02 - This error occurs when image data cannot be written to the CF card.\015\012This error can occur when the CF card is not fully seated in the camera\015\012or if the 350Ddoes not detect a card-ready signal wit ... Canon Rebel XT / EOS 350D Digital Camera

The camera will not turn on after being dropped. When I switch it from off to on, the green power LED flashes briefly. The lens does not move or attempt to extend. The LCD backlight does not illuminate. The LCD appears to be slightly damaged: there is some slight non-uniformity visible when I shine a strong light on it. Otherwise the camera shows no sign of damage. Is it possible that the damaged LCD is preventing the camera from turning on? Is there a hard reset procedure I should try? I've t

I have the same problem. Can someone advice ... Panasonic Lumix DMC-ZS3 Digital Camera

Camera lens movement mechanism seems to be damaged, as when switched on, the camera lens does not extend out completely and the object appears blurred on the screen. Similarly when switched off, the lens does not retract back completely and it needs a manual push to put it in a little more. But even then it does not go in fully. Rest of the functions are working well. The damage is the result of an accidental body weight going on the camera, when it was in on condition.

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras

I had an olympus digital camera model FE-370.having 8.0 Mega pixle,5X Optical zoom and 2.7'' LCD Monitor.My problem is big black spot appear while ''switch on '' the camera and shutter is not opening.I had purchased it on 22nd Feb.2009 from my local shop'' Croma Infiniti Retail Ltd'' here in Vadodara,Gujarat state,India.I had sent it back through ''croma'' for checking/repairing to the co's authorised service station.Now they told me to replace the ''LCD'' at the cost of Rs.3500/-.I had checked

There should be a year's warranty on the camera. I would contact the Olympus Camera Company. Here is a link to the website. It has some 800 phone numbers to call and there is a place you can click on to ask repair questions. Hope this helps. ... Digital Cameras

Sony dsc-13 I have sony dsc-13 digital camera and suddenly after switching it on in picture mode and video mode the data(day nd time,flash....etc) appears on a black background on the lcd though the lens door is open and i can see my previouly stored pics in the camera lcd and also in my computer after connecting through usb.. so the problem is i take black pics and videos while the lens is open and the charger attached or on full battery,and the new taken pics displays black as well

Basically it is a Japanese Model from where u bought it u are lucky u can\015\012get it free of charge replacement just tell me which region u belong\015\012there is a known issue of CCD failure u will get free of charge repairs\015\012fo ... Sony Cyber-Shot DSC-T3 Digital Camera

Rencently i bought a olympus camera (FE-5030) from singapore.I was taking a picture and suddenly the battery was totally finished.So i charged it using the Adapter which was provided with camera.After the battery is full i unpluged it and switched on the camera and tried to take a picture but the screen appears to be black and doted with white (Not able to see the focused object) but all the menu on the camera as usual as before and the photo is also black and doted with white. Please he

... Digital Cameras

Write protect error comes out after switching on the camera, What will I do? My Unit is GE A730. It occurs after I bought a new SD memory. I have used that alrady on my camera but I dont why after few days that when I was about to use it already this write protect message appears in the LCD screen.

SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the ot ... GE A730 Digital Camera

There appears a black patch on the left hand side of the LCD display of my samsung PL100 digital camera.The spot appears irrespective of the picture,and even when the camera is switched off,the spot remains.

Could be a "dead" area of the lcd screen. If your pics turn out ok, don't worry about it. ... Digital Cameras

Jammed lens My zoom lens is jammed, and when I switch on the camera the red light switches on but no picture appears on the screen. The zoom lenses remain as they are when the camera is both on or off. (they are jutting out as if the camera is switched on.) Can I repair my FE-210 and if yes how?

Would be best to send to repair center ... Olympus FE-210 Digital Camera

Split images Occasionally when I transfer photos taken with my Canon 40D to my computer they are broken in half or thirds and the images switched (the middle appears on the right side of the photo, the left appears in the middle, the bottom appears in the middle, etc.). When viewed on the camera they appear fine. This doesn't happen with all images, typically only one or two per 50. It doesn't seem to matter which program I use the transfer the images (Microsoft XP camera wizard vs. Canon sof

Use good antivirus with updates and then transfer ur images and cd write it\015\012half middle pic is due to speed of ur pc and viruses ... Canon EOS 40D Digital Camera

I have a Canon XM3 camcorder. It has given me many years of good service. Recently it has developed a fault. When I switch it onto Camera mode, and then flip the switch to Standby, the small screen flickers blue for a short time, but it does not show the image from the lens. If I switch off, and sitch to Playback, the small screen works OK and all the Playback works fine. Sometimes when I switch to Camera, and Standby, the small screen flickers blue, and then an image from the lens appears, but

Its the problem of CCD assembly\015\012CCD (image sensor) failures, particularly in conditions of high heat and humidity, led to cameras capturing images with either no picture at all, or with extreme distortion and se ... Digital Cameras

I have a swing-out LCD display on my powershot camera when opening the LCD display the image appears upside down how can i resolve this? there were never problems in the past.. when closing the lcd display on the back of camera with the display face-up no image shows..i would really appreciate help to resolve this problem as i'll be going on holidays soon..thankyou..Anna

The camera requires partially dismantling in order to fix this. if you cannot do it yourself then you will have to take it somewhere but be warned it wont be very cheap. If you live in new zealand i could do it for you however unlikely that is. ... Canon PowerShot A85 Digital Camera

View finder Camera will not switch to view finder mode it stays in LCD viewing even when the camera mode switch is changed, and will not switch to the menu allowing the card to format

I had the same problem, it is the switch inside that is broken which allows you to switch back and forth between viewing pictures and taking them. There isn't really a fix besides getting the switch replaced and I am having a very hard time trying to ... Konica Minolta DiMAGE Z6 Digital Camera

Lens Problem I just bought an Olympus C-8080. While switching the camera on there are some 4 to 5 light pixels on the display (lcd monitor on the back of the camera), even when directing the camera into the dark. It is not really a problem now, but do you also have this problem with your LCD monitor? What if they become more?

Dead pixels are a nightmare of every LCD screen. There is no way to avoid them - you can just hope they never happen to you. There is no pattern to how they appear and when, but the ones you have will stay for ever. If they bother you right now, send ... Olympus Camedia C-8080 Wide Zoom Digital Camera

Kodak V803 I think this is due to the camera being dropped: The camera switches on but all that appears on the viewscreen is a white light accompanied by black patches of distortion. The distortion suggests that the camera has suffered an impact as it has the appearance of a smashed window - with lines of distortion running across the screen. The view screen itself - is in tact - no evidence of impact - cracks or dents. I cannot get rid of this screen distortion no matter what button I press. Wh

There is no way except to replace with new screen.Sorry. ... Kodak EasyShare C513 Digital Camera

Kodak V803 I think this is due to the camera being dropped: The camera switches on but all that appears on the viewscreen is a white light accompanied by black patches of distortion. The distortion suggests that the camera has suffered an impact as it has the appearance of a smashed window - with lines of distortion running across the screen. The view screen itself - is in tact - no evidence of impact - cracks or dents. I cannot get rid of this screen distortion no matter what button I press. Wh

It would appear you have a damaged LCD screen. The same problem happened to my daughter's V803. The camera will take pictures fine but you will only be able to see them if you download them onto a PC. A replacement screen can be easily ordered and ... Kodak V803 Digital Camera

Blank LCD Hi! I have a Sony Cyber-shot digital camera, DSC-S40 model. I've been using it for two years now. Some months ago I couldn't get a picture from the LCD. It just went white. I can't see a thing. When I shoot the flash goes on and I can also hear the sound that it's capturing some image, but the LCD is still white. It can easily switch ON and OFF. I've even recharged and changed the batteries. It's festive season and I need to capture some memories with my Sony camera. I have misplaced m

Well its a cheap fix, dosnt last too long. In the lower right corner of\015\012the LCD, not actually on the LCD but just on the plastic portion of the\015\012camera push very hard ... Sony Cyber-Shot DSC-S40 Digital Camera

THE CRASH OCCURRED when I hooked up the camera to my MAC AND the Easy Share program had iniitiated. The photos appeared on the screen and as I selected them to transfer the crash warning appeared. Symbols appeared, each with a number i.e. 100_0414_1.JPG. I taken a few photos yet each symbol indicated that it did not transfer. Also, when I attempted to turn off the camera the LCD screen continuously read that one photo was being transferred. This process continued for approximately 5 minute

Get a separate card reader and use it to transfer your pics to a folder you create on your desktop.\012 ... Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD

This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.

You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera

I have a Nikon Coolpix S3000 digital camera that cannot be switched on. I purchased this camera 2 months ago and have not damaged it or exposed it to extreme temperature, humidity or light conditions. One day it ran out of battery and when I tried to recharge it with the USB cable the green light that normally indicates charging did not appear. There seems to be no way to charge or switch on this camera anymore. Can you please help me with this problem? Thank you.

Hi,\015\012\015\012Based on the information you've provided, it seems that you're trying to charge the battery of the Camera by connecting the USB cable to the USB port on the Computer. \015\012I suggest th ... Nikon Coolpix S3000 Digital Camera

Hello, From the moment I put a full loaded battery into my camera ( and althought the camera is still switched off) the LCD panel indicates A LOW BATTERY and keeps blinking. Switching on/off bottom and nothing happens. I tried another full loaded battery and same problem. I cannot use the camera at all. What could be the problem ? and what is the solution ? Would be great to get any advice from you. Thanks. Alexander.

Havnt head of this problem. if you are using canon official batteries and the charger used is correct for your country then take it back to the shop you got it from and send it in for repair. Or you could head over the japan canon site and see if t ... Canon EOS 7D Digital Camera

We have a Sony DSC-P150 7.2 Megapixel camera. When it switches on we get an error message as follows: E:61:00. If we get the option to take a picture then there appears to be no auto focus on the lens alsowhen switching off the camera the lens does not close down into the camera.

... Sony Cyber-Shot DSC-P150 Digital Camera

My camera when turned on no images appear in the lcd screen only tinge of brown-black colors or light blue color appear in the screen. Before this thing happened, once it's turned on immediately images appear in the lcd. What most probably happened?

... Sony Cyber-shot DSC-T9 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4427 seconds