Having problems with your Canon PowerShot S2 IS Digital Camera ?

Canon PowerShot S2 IS camera showing code E18

\015 Canon PowerShot S2 IS camer showing code E18\015

Answers :

\012Hello there,\012
\012The E18 error is related to the LENS not able to retract fully. If it is still under warranty, I would advise you bring it to the nearest service center. This is to avoid further damages. Otherwise, you can try a few things below.\012
\012There are a couple of things you can do. \012
\0121. Turn it on and then off. Spray canned air around the lens.\012
\012If trick 1 will not work out, try this.\012
\0122. Make sure the battery is fully charged. Turn on the camera and then give it a couple of firm whacks on the side. Make sure nothing is blocking the lens and wait for it to fully retract. \012
\012Let me know how it goes.
Repair Help & Product Troubleshooting for Canon PowerShot S2 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon PowerShot S2 IS camera showing code E18


\012Hello there,\012\012The E18 error is related to the LENS not able to retract fully. If it is still under warranty, I would advise you bring it to the nearest service center. This is to avoid further damages. Otherwise, you can try a f ... Canon PowerShot S2 IS Digital Camera

Lens cover does not open E18 code shows - Canon PowerShot S400 / IXUS 400 Digital Camera


Problem in lens unit repair the lens unit ... Canon PowerShot S400 / IXUS 400 Digital Camera

Canon Powershot SD450 E18 problem: The camera lense would not open and reported error code E18 on power-up and then would shut down. I followed a procedure on the web for this issue and got the camera lens to open and it was working (able to take pictures for about a minute). When I powered down, the lense did not completely retract. I tried re-powering on but nothing happened. The camera is not getting any power. I figured the battery died so I re-charged it. I put the fully charged batt


... Canon Digital Cameras

I have a Canon PowerShot SD790 IS. The camera turns on, the lens comes out and that's it. Then it shuts down and the code E16 shows up. Can't seem to find anything on that code that tells me what the problem is. The cameras only 18 months old. Can you help me?


The error message indicates an error that involves the lens unit or lens cover.\015\012 \015\012 \015\012 \015\012This error may appear where the lens is prevented from properly\015\012extending or retracting such as, f ... Canon PowerShot SD790 IS Digital Camera

Canon powershot sd400 error code E18 - Canon PowerShot A80 Digital Camera


Yes !! I wacked it a couple of times on a hard surface and it started working again after I dropped it and got the dreaded E18 error mesage in the middle of a Jewelry shoot. wm ... Canon PowerShot A80 Digital Camera

My lens of my canon powershot s21s camera would not contract and I cannot take pictures. When I try to use it I get a code saying E18 and a beeping sound.


I have had several digital cameras that when the lens is extended and the camera is dropped or the lens is bumped, the lens itself will become "off track" and will not retract or work without have the whole camera taken apart ... Canon PowerShot S2 IS Digital Camera

Hi, I have a Canon IXUS 40 digital camera - My lens suddenly does not want to close and show me an E18 error code on screen - what is the problem?


Hey there johans, the E18 error code indicates there is a problem with your lens unit or lens cover. It was probably the result of an impact of some sort, or you may have something such as sand or dirt jammed in the device. If you cant see anything t ... Digital Cameras

Error code E18 - Canon PowerShot S2 IS Digital Camera


Believe it or not, there is a website that is dedicated to the error code e18 lens problem. Here they discuss the error code and solutions.PLEASE CLICK HERE FOR THE SITE ... Canon PowerShot S2 IS Digital Camera

Error code "e18"? - Canon PowerShot A95 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot A95 Digital Camera

I have a canon powershot sx200 IS. I'm trying to upload 2 very important videos to windows photo gallery and it's telling me that the videos are corrupt and showing me the error code 80004005. I can view the videos fine on my camera but they just won't upload!! please help!


Try using a card reader to upload them to a folder you create on your desktop. From there, You should be able to import them to any program you wish.\012 ... Canon PowerShot SD940 IS / IXUS 120 IS Digital Camera

Canon PowerShot S45 lens is retracted out and lens cover won't open or shut. camera cannot operate. Powers up, E18 shows on blank viewfinder, beeps 3 times and goes back to blank viewfinder. Shift lens cover back, sounds like it's opening/closing, but nothing happens other than the above.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot S45 Digital Camera

My canon ixus 750 shows a code E18 on the screen and the lens will not retract. But the camera will not allow me to take any photos it just switches off. Please help me.


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Digital Cameras

Lens stuck wont go back in geting code e18 - Canon PowerShot A620 Digital Camera


If your camera is still under warranty, the best thing you can do\015\012is to take it to the nearest official Canon repair shop and Canon should\015\012fix it for free.\015\012\015\012If your camera is out of warranty, or i ... Canon PowerShot A620 Digital Camera

The code e18 comes up - Canon PowerShot S30 Digital Camera


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot S30 Digital Camera

Code e18 visible on screen - Canon PowerShot A80 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon PowerShot A80 Digital Camera

I Have a Canon powershot A410 and I cant get it to work anymore. The lense will not open and it beeps at me and then E18 shows up on the bottome left hand side of the screen. I can still down load all my pictures and look at the pictures on the camera, just unable to open the lense to take more!


The "E18" or "Lens" error message indicates an error that involves the lens unit or lens cover.\015\012 \015\012 \015\012 \015\012This error may appear where the lens is prevented from properly\015\012extending or retra ... Canon Digital Cameras

Recently had to ship my canon Digital RebelXS/ 1000 digital camera for repair. It would keep showing me an error 99 code. the camera is only 7 mths old. I'm just learning to use this camera.. Is it something I could avoid or done to give me this code. I asked the place I had to ship it to what canon had done. All I was told there was a short in the camera and they cleaned the lenses. I really like to find out what shorted out.


This is what the canon people say to do for error 99Read this!!!The guy at tech support listened and then told me that the lens contacts were dirty and to get a pencil with an eraser on the end, just a regular old ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18


E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

Hi I recently purchased Canon Powershot Sd1200 IS. I installed the Solution Disc software but when I connect the camera to my computer there is nothing that tells me I have installed new hardware - the computer makes the ringing sound when I turn camera power on and off. Only the user guides show on my computer. Before this camera I had the Canon Powershot SD1000 and was able to download my pictures with no problem. Was told at Future Shop that it might be a problem with my computer. rnEmail


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

My Canon PowerShot SX200 IS lately has been displaying some weird green graphic when its on. help?? I dont know how to fix it Ever since I had accidentaly knocked over my Canon PowerShot SX200 IS camera, it has first started to display wierd colors when its on, kinda like thermal optics. I had tighten the bolts holding it together, but that made slighty better. Now it shows some weird green like color when it's on. How can I fix this?? This camera is my work camera, and I need it for an upc


... Canon Digital Cameras

My canon sx120 digital camera shows error code E41 only when plugged into any computer. The screen on the camera blanks out showing only the code when this problem occurs. But camera functions fine otherwise.


... Canon PowerShot SX120 IS Digital Camera

My Canon Powershot A460 shows Card Locked. The card switch is in the unlocked position. I have another camera. the card works in it. But the card from that camera also shows as Locked in the A460. I have tried the turn camera off and remove card, then turn camera on, then turn camera off and insert card. Both cards still shows Card Locked in the A460 and both work in the other camera


There is a lock lever inside the card slot. You could try to move it with something like a toothpick. ... Digital Cameras

My Canon Camera Powershot A470 has been registering the shot images, showing them with horizontal lines across the image. The lines look like the ones on the start-up "Canon" image when you open the camera. I have tried to adjust settings but the horizontal lines keep showing on the image, What's the problem?


There is a recall on the Powershot family lens.check this Fixya's tip: http://www.fixya.com/support/t114938-canon_digital_camera_recall_defective ... Canon Digital Cameras

Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five


Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera

E18 error code keeps showing up. The camera won't shut off.


Check out the below link to know what ur error means and how to fix it\015\012\015\012http://www.e18error.com/\015\012\015\012thank you\015\012have a nice day ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4763 seconds