Having problems with your Canon PowerShot S2 IS Digital Camera ?

My Canon S2 IS Powershot camera LCD screen turned black

\015 I've had my Canon S2 IS Powershot camera LCD screen turned black.I have been in touch with Canon and it is like it will cost me 99 USD to repair it. Any helpful idea on how and where i can have it repaired without having to spend that much?\015

Answers :

A stuck shutter is another common failure mode for digital cameras, ESPECIALLY for the S2 IS (you should actually complain to Canon at 1-800-OK-CANON. If it is indeed a sticky shutter, they have been fixing this for free). The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very bright and overexposed, especially when taken outdoors (for shutter stuck open). \015\012To confirm a stuck shutter, put the camera in any mode other than "Auto", and turn the flash OFF (you don't want to blind yourself for the next step). Next look down the lens and take a picture. You should see a tiny flicker in the center of the lens as the shutter opens and closes. If no movement is seen, then you likely have a stuck shutter. If so, please see this link for further info and a simple fix that may help. Hope this saved you $99.\015\012
\015\012
Repair Help & Product Troubleshooting for Canon PowerShot S2 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Canon SD500 Powershot Elph camera that is about 2 years old. Recently on vacation the LCD screen stopped working properly. The screen is white with an asymmetrical black configuration on it. It's sort of like a piece of an umbrella--pointed edges and lines running through it. The camera will still turn on and off but nothing is available on the screen. Even though I paid $350 for it, I'm ready to just ditch it as Canon wants over $100 just to look at it.


Ditch it- They will want $100 just to tell you to get a new one. ... Canon Digital Cameras

My Canon S2 IS Powershot camera LCD screen turned black


A stuck shutter is another common failure mode for digital cameras, ESPECIALLY for the S2 IS (you should actually complain to Canon at 1-800-OK-CANON. If it is indeed a sticky shutter, they have been fixing this for free). The symptoms of a stuck o ... Canon PowerShot S2 IS Digital Camera

The Viewfinder on my camera Canon Powershot SX20IS turns into black, but the LCD screen is okay. How will I see both the viewfinder & the LCD in normal viewing?


... Canon PowerShot SX20 IS Digital Camera

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18


E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

My daughter dropped her Canon PowerShot SX 200 IS and now the LCD screen is black. The camera still turns on and takes pictures, and she can view photos that she took previously, but she can't see anything on the screen. She is on a trip to Europe and needs assistance. Thanks!


... Canon PowerShot SX1 IS Digital Camera

Black screen hi, i have a canon powershot A75 and when i turn the camera on i see the blue logo then its supose to be the picture screen but my picture screen is black n fuzzy i dunno y i thought maybe the settings were wrong but i dunno plz help me i need my camera for my brothers wedding help me fix this problem! remember black camera screen! thank you sue


Hi,\015\012Your Canon A75 camera has problem in CCD Imager and this part will be replaced to get back picture.\015\012Canon announced free of cost repair scheme for subject problem and you can see details by clicking ... Canon PowerShot A75 Digital Camera

Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five


Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera

My canon powershot a1000 when turned on, displays a black screen with icons. its not like this before. normaly when i turn it on, i can see the view from the lcd but now no more. but everything seems to work as normal except for the black screen after turning it on. my trick is to press DISP in order for me to see the lcd display.pls help. thanks


... Canon Powershot A1000IS Digital Camera

When I turn on my Canon PowerShot S2 IS camera and set it to shoot mode, the screen is black. A while back, I was able to get the screen to show by toggling with the camera and constantly turning it on and off. Now, however, it is completely black and will refuse to work. How do I fix this problem? Thank you.


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very b ... Canon PowerShot S2 IS Digital Camera

I have a Canon Powershot Digital camera just over 1 year and we turned it on the screen is all black now(started out 1/2 black-it flashes but no picture is taken- all settings are as they have been since we bought this camera from BestBuy. This is the 2nd Canon Powershot we bought in the past 3 1/2 years & it will be the last one. Can you tell me what I can try to get this fixed? Thank you. Karen from NC


Test ... Canon PowerShot A85 Digital Camera

Canon PowerShot A480 won't take photo. Pressing on button camera on then pressing silver button to take photo when pressed down screen turns black no picture taken. Batteries new. This is the story; camera was working fine then showed low battery bought new batteries took couple of photo's showed low battery again. Replaced battery same thing again but now when pressing button to take photo screen goes black. Camera bought 30/9/2009. Any idea's????


Its just a matter of batteries...some are not powerful enough to operate the camera ....Try to change them and buy some real good ones..like Duracell or Tatra...do not make any compromises when buy the batteries...get the best cause these kinda camer ... Canon Powershot A480 - Silver Digital Camera

Black Screen Canon Powershot A70 3.2 Camera. All of a sudden my screan went totally black. When I turn on the camera I can see the Canon logo as well as all the white symbols but the screan is totally black and cannot take any pictures. Can anyone help?


Http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&keycode=2112&fcategoryid=221&modelid=8776 ... Canon PowerShot A70 Digital Camera

Canon powershot sd960 is digital camera 12.1 mega pixels. When you turn on the camera, you see the initial canon greeting, then the screen in black and when you take the picture it is black. When you review pictures from SD card, you see the rev images but the new ones do not show up but black.


Hi,\015\012\015\012This may well be an internal comonent failure or a problem with the SD card. However, to troubleshoot this issue, first remove both the SD card and the batteries altogether from the camera. Replace both, power up and se ... Canon PowerShot SD960 IS Digital Camera

I have a Canon PowerShot A400 digital camera. when I turn the camera on, it acts like it is going to turn on, then it starts beeping and the screen goes black. It has the message E18 in the lower left corner of the screen. I changed the batteries, but it is still doing it.


Please see this post:\015\012\015\012http://www.fixya.com/support/t102982-e_18_problem\015\012\015\012Good Luck!\015\012\015\012Brian ... Canon Digital Cameras

Canon rebel xsi dropped screen is black photos don't register on card camera functions seem to work...menu shows up buttons work lcd shows settings when camera is turned on but when I depress the shutter a screen comes up black with 1/60 10 100/1898 any suggestions? Thank you.


You may have to send that to a repair centre as dropping digital camera's often shake electronic parts out of place inside. you should try removing the digital card and reinstalling it to see if that helps at all. ... Canon EOS Rebel XSi Digital Camera

Lcd screen the screen illuminates,but it doesn't display anything. I have a canon powershot SD110 digital elph.  When I turn the camera on the lcd lens illuminates but does not display images.  I cannot take new pictures but can view previous one.  Menu options occurs on the screen and can be changed.  I have misplaced my information booklet and do not know what to do to troubleshoot this problem and if it can be fixed.


Cannot get images deleted  ... HP PhotoSmart M437 Digital Camera

Canon powershot SD780 is camera. Camera shows the canon screen then turns black and beeps three times then says "lens error restart camera". I don't know how to restart...i need to use it I'm on a trip What do I do?


There's really no way to restart it if there's a physical problem with the lens. Try to power it on again but if that doesn't reset it, the camera needs to be serviced. A great site for help with these is: camerasandparts.com They just specialize in ... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera

Faulty camera Turned on camera , and theres a black ink like mark under LCD screen. None of the features on the camera now work.When camera is of you can still see this mark very faintly LCD screen is white when turned on , black mark takes up left side of screen and is very very slowly getting bigger. Could this possably be a leak of some sort? Thanx Matt


LCD is damaged and needs to be replaced. The cost of replacing is less than buying a new camera. If they charge more than 50 of the cost buy a new camera. ... Kodak EasyShare DX4530 Digital Camera

My canon powershot S2 1S is showing me a black screen and taking black photos, the camera turns on and shows me it's tool bars but is black otherwise. Any idea how to fix it?


... Canon PowerShot S3 IS Digital Camera

Help! Hi! I have a canon powershot S45 digital camera, when i turn it on, I get the canon screen and then it goes straight to a black screen and on the bottom left hand side it says E18...what do i do?


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try:\015\012\015\012 ... Canon PowerShot S45 Digital Camera

Powershot A560 I have a Canon Powershot A560 but now when I turn it on it beeps 6 times and the screen shows "canon" in blue but then goes black and says at the bottom "lens error, restart camera". Also, then lens never fully goes in or out. Help.


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot A560 Digital Camera

Hi,Have got got a canon(powershot a710 is) whenever i turn on the camera i get a few beep noises and the screen remain black with the message'lens error,restart the camera'....and it then turns off.....I have not dropped it down.hoping someone would help me out with a solution. Cheers, Sanjana


The lens is jammed. Usually dust or grit gets in the mechanism and causes it to stick. Could try blowing down the side of the lens but it will probably need taking apart and cleaning. It is not an easy job to do but it might be worth trying as it wou ... Canon PowerShot A710 IS Digital Camera

LCD LENS WHEN I TURN THE CAMERA ON, THE SCREEN IS COMPLETE BLACK. I CHANGED THE BATTTERIES. I CAN TAKE A PICTURE AND VIEW IT ON THE COMPUTER, BUT I CANT SEE ANYTHING IN THE LENS OR SCREEN. I ASKED CANON WHO SUGGESTED THE LCD WAS CRACKED AND TO SEND IN FOR ESTIMATE TO GET IT REPAIRED. I ONLY HAD IT A YEAR AND IT HAS NOT BEEN DROPPED. DO YOU HAVE ANY SUGGESTIONS OR TROBLESHOOTING I CAN ATTEMPT?


Canon would appear to be correct with this diagnosis ... Canon PowerShot A530 Digital Camera

Canon Power Shot S1IS 10x optical zoom 3.2 mega pixels: I turn the camera on and cannot view any subject images either through the viewfinder or LCD screen. The cap is off and the LCD screen and viewfinder are completely black. The display information works fine.


Hi,\015\012Your Canon S1IS camera has defect in CCD Sensor and Canon will repair it Free Of Cost. For details, please click ... Canon Digital Cameras

Nchatta Hello, My Canon s45 was working perfectly until it was dropped from a very very small heigh in a soft leather case with protection. The camera works in the sense that it can read and display the images from the SD card perfectly, the lense extends but you cannot see anything on the LCD when wanting to take a picture bar a white box in the middle that usually turns green once focussed (but now doesn't.) The screen is just black. The shutter clicks, takes the picture, but just a black LCD


It seems like if u see icons on lcd then sorry to tell u i think ur CCD is gone it seems like , but to make it sure first get the lens checked but iam pretty sure abt the CCD bcoz it is risky in impacts and jerks ... Canon PowerShot S45 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5407 seconds