Having problems with your Canon PowerShot S2 IS Digital Camera ?

I also have A canon poweshot S21S camera . The lens will not retract cannot take pictures and code E18 . Is the camera hard to take apart ?


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a professional.

Use\015\012\015\012\015\012\015\012\015\012\015\012\015\012 these at own risk as it may further damage the camera.

Firstly ,\015\012 try connecting your ac adapter or usb cable.

Try holding the \015\012shutter button while switching on the camera.

Look at the lens , \015\012and if some of the lens 'circles' is misaligned or not concentric then \015\012try wiggling it (while holding camera lens down).

Try gently \015\012pushing or pulling the lens when it extends but this is risky as it may \015\012cause the lens barrel to slip out of its guidance system.

Another\015\012 way to do this is to place the camera lens down on a hard surface and \015\012then power it up. Be sure to use a soft cloth or something similar as to\015\012 not scratch your lens or casing. Let the lens push the camera up and \015\012down a few times and sometimes the little resistance provided by the \015\012camera is enough to get things going again.

Try hitting your \015\012camera near the lens on the body with the soft tissue on the palm of \015\012your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to \015\012replace the camera.

If it is still under warranty I would suggest\015\012 you take it in before trying any of these steps and remove any \015\012off-brand batteries or accessories as some stores are really fussy about\015\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\015\012 \015\012the advise is useful. please do not hesitate to let me know if you need \015\012any further assistance. Also, please be so kind to let me know if you \015\012found this helpful.

Regards
Andrea/
Repair Help & Product Troubleshooting for Canon PowerShot S2 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I also have A canon poweshot S21S camera . The lens will not retract cannot take pictures and code E18 . Is the camera hard to take apart ?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon PowerShot S2 IS Digital Camera

My lens of my canon powershot s21s camera would not contract and I cannot take pictures. When I try to use it I get a code saying E18 and a beeping sound.


I have had several digital cameras that when the lens is extended and the camera is dropped or the lens is bumped, the lens itself will become "off track" and will not retract or work without have the whole camera taken apart ... Canon PowerShot S2 IS Digital Camera

Canon Powershot SD450 E18 problem: The camera lense would not open and reported error code E18 on power-up and then would shut down. I followed a procedure on the web for this issue and got the camera lens to open and it was working (able to take pictures for about a minute). When I powered down, the lense did not completely retract. I tried re-powering on but nothing happened. The camera is not getting any power. I figured the battery died so I re-charged it. I put the fully charged batt


... Canon Digital Cameras

E24 code Hi all, when i turn my Canon Ixus 70 Digital Camera on i cannot take a picture as as an error message appears E24. I can look at photo's but not take them . Please help me !!! =)


Dont stick a pin in the wee hole at the front thinking its the restart button.\015\012it's the microphone... ... Canon PowerShot SD500 / IXUS 700 Digital Camera

The lens on my Canon digital camera will not close... i am unable to take a pciture and do not know the reason for this....when the camera is put on i am able to see my old pictures but when i click to take a new picture the screen is blank..i dont know what to do...please help...i have the canon power shot sd 500 camera and the problem that appears is the E18...... please help me


OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Canon PowerShot SD500 / IXUS 700 Digital Camera

My Canon A2200 has a white screen when I turn it on and stays that way can't see what I am taking a picture of or any menu items . It still takes pictures but cannot view them on the camera and don't really know what I am taking pictures of. Is there anything I can do to correct this. I have chrged the battery fully taken out the memory card and battery and still nothing.


... Canon Powershot A2200 14.1mp Digital Camera red

Hi, I have a Canon IXUS 95IS camera.. For some reason, when I attempt to take a photo, the LCD screen isn't displaying what is actually in view? In movie mode it comes up on the screen but when i flick it to Auto or camera mode, the screen goes black and only shows the little icons... Weirdly enough, it still takes the picture but the really annoying thing is it doesn't show up on the screen what you're taking a photo of so it makes it really hard for the person taking the actually photo... can


Ah yes! you have pressed the display button. Turn the camera on and you see the icons in the display, look for the Disp button and press it, the display will cycle through its modes icons, black, image and icons. ... Digital Cameras

Canon SD 550-- sensor problem? Bought 3/2006 and have had no problems. Suddenly, LED screen went black--shows nothing and cannot take a picture altho will flash and record black picture. Shooting options do appear on screen when in picture-taking mode. Can see pictures that were taken previously, however, while showing them on TV screen, camera shuts off. Is this an expensive repair. Thanks.


The shutter of the camera is not opening that is why every picture taken is recorded black. It is a mechanical problem and probably has nothing to do with the sensor. Not very expensive ... Canon Digital Cameras

Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.


This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera

My Canon EOS Rebel XS digital camera has suddenly stopped taking pictures. It will not focus even though it is on the auto focus setting. The first set of numbers are flashing and there is a flashing dot behind the ISO 800. It was working fine when I used it one time and then the next time it wouldn't. I can view pictures, but cannot take them on any setting except A-DEP and it's not focused even then. Please Help!


Try cleaning the contacts on the camera body and the lens where they meet with a cotton swab lightly dampened with rubbing alcohol. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

How can I take the cover off the lcd viewfinder on a Canon Powershot a480? There is oil under the cover. Canon will not repair it under the warranty, and they will charge the cost of a new camera to fix it. There is no problem with picture taking, but it's hard to see the viewfinder image due to the oil.


LCD means "liquid crystal display"...probably the "oil" is the "liquid". ... Canon PowerShot A480 Digital Camera

I bought a used canon xs from craigslist. I think a hard lesson learned already. Anyway the camera appears to be in great condition. The problem is whenever I take a picture it does not come out right. The colors are way off. Some colors look fine, blue will come out beige, gray or green. This is with the flash indoors or outdoors with just normal light and the camera on full auto. I called canon and they said it sounds like the sensor is going bad. Just wondering if anyone has any advic


The experts at Canon are probably right. But, check the white balance and make sure it is on "auto WB". Go into the camera menu and find "reset" to get the camera back to factory default settings. If it still doesn't work, then you probably need a se ... Digital Cameras

Black Screen Canon Powershot A70 3.2 Camera. All of a sudden my screan went totally black. When I turn on the camera I can see the Canon logo as well as all the white symbols but the screan is totally black and cannot take any pictures. Can anyone help?


Http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&keycode=2112&fcategoryid=221&modelid=8776 ... Canon PowerShot A70 Digital Camera

Our camera when you turn it on has a blank screen and you cannot take pictures. You can review pictures and see the different menu modes, but the screen is otherwise black. We have had it repaired once for almost $200 by a Canon repair centre with the exact same problem about 18 months ago. They said it was a shutter issue?? It sounds like it could be a CCD issue? I have written Canon customer service over 2 months ago, suggesting a defect, to which I have received no reply.


See this link:http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=223&modelid=9824&keycode=2112&id=48264Your camera is one of those listed, and your symptoms indicate this is the problem. Canon should rep ... Canon PowerShot S1 IS Digital Camera

I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the flash it wont let me change the settings of the flash at all. Apart from this the camera lens shutter seems to be sticking when i turn on the camera it doesnt always open i have tried cleaning the lens but it doesnt seem to make any difference!


I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the f ... Sony Cyber-shot DSC-W70 Digital Camera

Canon 1000D Hello there, I'm in China at the Beijing games. my 1000D is giving me a error message 99. can't take picture. I have turn it off and on, take the battery out but the problem still come back after 4 or 5 snaps. please help. I have change lenses and clear the head but not winning. Thanx well i have the similar problem, that i could identify that the camera goes off state after 30 mins, then i found that the display power cannot come, but the camera is working with view finder, if i


Yep set the auto turn off higher and instead of removing the battery, just open and close the battery compartment.This appears to be a problem I have raised with Canon, hopefully they will release a firmware update soon to fix this ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Nchatta Hello, My Canon s45 was working perfectly until it was dropped from a very very small heigh in a soft leather case with protection. The camera works in the sense that it can read and display the images from the SD card perfectly, the lense extends but you cannot see anything on the LCD when wanting to take a picture bar a white box in the middle that usually turns green once focussed (but now doesn't.) The screen is just black. The shutter clicks, takes the picture, but just a black LCD


It seems like if u see icons on lcd then sorry to tell u i think ur CCD is gone it seems like , but to make it sure first get the lens checked but iam pretty sure abt the CCD bcoz it is risky in impacts and jerks ... Canon PowerShot S45 Digital Camera

Im having trouble taking apart my canon A520 camera to fix E18


... Canon PowerShot A520 Digital Camera

Verticle Lines When I turn on my camera, all I can see in my view-finder is many lines, almost like a multi-colored bar code. Sometimes this occurs after trying to take the first picture, but most of the time there cannot even be a first picture. When I attempt to snap a picture with the lines in the view finder and then 'recall' that picture, it is only the lines.


This is a CCD or main processor failure.\015\012Nikon will advise repair or replace. ... Nikon COOLPIX L3 Digital Camera

I dropped my canon camera and it says lens error restart again. i dont want to lose my picture but the lens dont go in. i can see my pictures but i cannot take a picture.


Any pictures you have taken in the past should be safely stored on the memory card. Make sure you copy them onto your computer to ensure you don't lose them while fiddling with your camera. You can use either an external card reader or you might be ... Canon PowerShot A560 Digital Camera

I've been using my Canon A85 for years.All of a sudden yesterday I was not able to download pictures from camera into the computer (running XP).Also tried the same on my portable (running XP) and it does the same. Both P.C. actually cannot see the device once USB plugged in and turned on (in play mode).I already tried to change the cable, still no joy !!!I figure the camera needs to be resetted (but how rather then taking the batteries out).By other hand camera is still functioning properly: ta


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot A85 Digital Camera

Canon A80 My camera is about 5 yrs old. The screen displays primarily fuzzy vertical lines and when I take a picture of this, it comes out the same as indicated by the camera screen. I read your analysis of this on the internet. I have never taken the camera apart in any way. Could you describe this and what tools might be needed?


Just got my camera back from Canon, all fixed. ... Canon PowerShot A80 Digital Camera

I have a Canon A75 Powershot in excellent condition. Since yesterday it dosn't work. When it is in capture mode, I cannot see the picture from the LCD display. Display is working. When I try to take picrures I get a black picture with nothing on it, just like I am capturing in a very dark place. But I can see pictures that I have captured before the problem. What can I do? I am Christos, from Cyprus. Is there anyone who can fix this problem with my camera?


CCD is gone.Need replacement. ... Canon PowerShot A75 Digital Camera

White pictures when we take a picture, it picks up so much light that you can hardly tell what the picture is taken of. how do i adjust shudder speed? camera type is canon power shot a570is.


Maybe you are shooting in the manual mode (shown as "M" on the dial) with an incorrect exposure setting. Make sure that the dial is in "Auto" mode to check if it will shoot correctly then. If you are still getting the white picture on "Auto", then it ... Canon PowerShot A570 IS Digital Camera

I HAVE A SONY MVC-FD200 MAVICA CAMERA I USE FOR WORK. I AM THE BODYSHOP MGR AT A CHEVROLET DEALERSHIP. IUSE THE CAMERA FOR TAKING PICTURES OF DAMAGED CARS . I USE THE FLOPPIES NOT THE MEMORY STICKS. CAMERA WORKED FINE ONE DAY, THE NEXT DAY I GOT THE ERROR CODE C:13:01 CANNOT READ DISC.


Hi,C:13:01 error code shows problem with floppy disk.Please format floppy disk in camera through format option in menu. This will solve your problem.Also check camera with another floppy disk, this camera does not recognize 2DD flop ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5360 seconds