Having problems with your Canon PowerShot S2 IS Digital Camera ?

Canon S2 - lens error when zoom at maximum. Also will not focus at maximum zoom


Answers :

This happened to my canon powershot S2 which is a common problem,, Canon replaced the optical assembly at no charge after the warranty period as this is a known defect in the S2.. just be persistant and they Will fix it

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Canon PowerShot S2 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon S2 - lens error when zoom at maximum. Also will not focus at maximum zoom


This happened to my canon powershot S2 which is a common problem,, Canon replaced the optical assembly at no charge after the warranty period as this is a known defect in the S2.. just be persistant and they Will fix it ... Canon PowerShot S2 IS Digital Camera

Zoom error The lens extends to maximum and motor keeps running when camera switched on, then lens retracts to about an inch then the screen says Zoom Error, also the zoom control doesn't work then. and there is no picture. Pictures already stored in camera can still be seen. But it seems there is something wrong with the zoom setting.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will ... Fuji FinePix S8000fd Digital Camera

I use a Quantaray lens af ld 70-300mm 1:4-5.6 tele-macro(1:2)@62 with my Canon eos Digtal Rebel xti. I have used the camera and the lens together very well for about a year and a half. Just recently with this lens set aat normal and the camera set at af(auto focus)the lens trys to focus and will continue to search for the correct focus setting with out taking the picture. Also the lens appears to be darker when I look through the viewer. I have a Canon EFS18-55mm lens which is operating correctl


... Digital Cameras

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

Finepix J40 Serial no. 1SG25018 Purchase date 01-06-2011 Lucknow India, I want to tell you that I am very SAD to purchase this J40 camera. Because my camera focus is not working well. Sometimes zoom error is also occurring. I take the camera to service but they do nothing. When I take it to service centre • 1st time they said lens damage. • 2nd time they take camera said me it will only repair by company, after few days they said that they send the camera to company and it is now fully repai


You should have some bill or proof that you purchased the camera. Send a notice to the company representative in India that due to lack of proper service and defective camera, you are going to sue for damages. Ask him to reply within 14 days. The l ... Digital Cameras

Sigma 17-35 mm AF EX f2.8-4.0 bought for EOS 50 4years ago did not work with with new Canon 400D. Sigma claimed needed new chip. Since August is now back for third time. Noisy focussing, hunting when focussing and inaccurate focussing with both camera bodies. Also does not indicate change in maximum aperture from 17mm to 35mm or indicate lens angle in digital data. Since chip change will not now focus correctly with EOS 50 body.


... Digital Cameras

When the camera is turned on a FOCUS ERROR shows up on the screen and will not disappear. Also the zoom lens is stuck half way out. Is there an easy fix. Regards LORRENZO.


I don't think there is an 'easy' fix for this except to send it in for professional service as the gears are not meshing right inside the camera causing this focus error. ... Digital Cameras

Powers off my canon powershot sd600 digital camera keeps powering off after about 30 seconds. I have gotten a new battery and that didn't help. On the left hand side before it shuts down it has the letter and numbers E18 on the bottom. The zoom lens is also sticking out and will not retract. There are no error messages on the camera at all. If anyone has a solution please let me know. Thanks!


E18 is a lens error message, the lens is stuck or bent, and wouldn't come out, that's why camera shuts off after it tries to do so at the start, not much you can do, but replace the whole lens assembly ... Canon PowerShot SD600 Digital Camera

Lens error When I switch on my Exilim Z-500, the zoom extends only half way of what it used to and there's some cracking noise as if something was blocking it. The zoom is at maximum, i.e. when I zoom in further it goes to digital zoom. But when I try to zoom out, it gives me another cracking noise, a lens error message and switches off. I can't take any pictures because the zoom setting seems to be totally messed up. The image is all blurry - at any distance. I partly disassembled the camera a


The lenses are mounted to cylinders and the outside of the front cylinders have pins mounted to them. The pins ride in little tracks that move the front one in and out. The cylinders rorate with a motor and gears. You could have damaged gears or the ... Casio Exilim EX-S500 Digital Camera

My Nikon D700 Camera is sometimes not recognizing my having a cpu lens (24-70 f2.8 & 105 Macro f2.8 VR) attached and giving me a the error as listed on user manual page 410 with F No lens attached, or non-CPU lens attached without specifying maximum aperture. Aperture shown in stops from maximum aperture. Aperture value will be displayed if maximum aperture is specified. Pages 210 ? 2 4 (blinks) Camera unable to focus using autofocus. Focus manually. Page 81


... Nikon D700 Digital Camera

Zoom lens mis-focusing. The lens "wizzes" in and out trying to focus. The lens will eventually "settle-into" focus; but sometimes this takes a number of seconds to accomplish. Also, the lens tends to "slip-out" of focus just as the button is depressed to take the photograph. Only problem seems to be with the lens focusing.


This usually happens when you are focusing on a spot which lacks details. Try aiming you focusing area to something which has clear edges ... Canon PowerShot S1 IS Digital Camera

I have a canon EF 70-300 f/4.5-5.6 DO IS USM lens that has a zoom lock switch. When in the unlocked position and I try to zoom the lens it sticks at around the 200mm mark and cannot seem to move it below that positon, I need to wiggle the barrel before the zoom seems to "let go" and the lens goes to other positions. This is quite a problem as the lens cannot be operated in all its positions. Also when trying to get it unstuck, it feels like I am applying too much force and could further damage


Http://www.pasieka.com/static/simon/fixcam/\015\012\015\012click the link ... Digital Cameras

My canon camera Ixus 8515 has an error when turning on (after some 'stuck' noises) that reads 'lens error, restart camera'. The lens is not retracting. The camera has not been dropped. Was working fine one minute, then camera appeared out of focus the next. When I turned camera off then on again, error appeared. Lens won't go back in. Have not tried forcing it as yet.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

Lens error 14 lens error 22 the messege show up when i zoom in maximum and put the shoot botton is:" len error, restart camera".


\012try these:-\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SD990 IS / Digital IXUS 980 IS Digital Camera

Canon powershot sd1100 1s lens is out of focus. This happened after there was a "lens error, restart camera" in which the lens was stuck. Once the lens finally went back in and was working properly the lens was then out of focus


... Canon PowerShot SD1100 IS Digital Camera

Won't Focus I have had my Canon Powershot SD1000 for about 9 months now. I have had problems with the lens error and it getting stuck but have always been able to get it to work eventually. I had another bout with the lens getting stuck, was able to get it unstuck but now it won't focus at all. Normally I press the shutter down half way to get it to focus on my subject, but now it simply won't focus. I'm wondering if maybe my settings are off, or if it's an internal problem. Any suggestions


You still have a bad lens the internal focus gear is out of alignment. or is offset. a repaired or new lens is required. Sorry :( ... Canon PowerShot SD1000 Digital Camera

Canon Sx120 IS camera will not zoom closeup from a tripod at 19" set at macro!!! Instructions say the camera cannot focus in the range of the yellow bar, well how do you get away from the yellow bar? Which will also result in removal of the macro setting! Any zooming to get closeup blurs out of focus no matter what I do and that's when still within the optical zoom range. Taking pics of coins and need to zoom in and get really close, as advertised. Tripod is set at shortest distance, 19


Take it to a repair shop. ... Digital Cameras

Olympus SP- 550 UZ , Model number Sp -550 UZ, L 08208054 UO 18x optical zoom - 28mm wide, Digital Camera DC 6V As soon as the power button is pressed, the screen lights up the lens comes out with a message "Zoom Error" and the lens immediately goes back into the camera. I can also hear light clicking sound as the lens goes back into the camera. This problem has been going on occasionally and then I could see the object to be photographed. Now for the last few days I am unable to take any pictur


... Olympus SP-550 UZ Digital Camera

My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera

My nikon coolpix s220 have a lens error and when i turn it onthe lens goes in and out like its trying to focus and it makes a wierd noise. it also wont let me do anything it just pops up saying lens error


Try removing the battery/batteries and clean the contacts underneath. Also, clean the battery contacts and the charger, if so equipt. To do this, dampen a cotton swab with rubbing alcohol and rub the contacts. Blow into the compartment after to clear ... Nikon Coolpix S220 - Aqua Green 2.5" LCD Digital Camera

Lens error My casio exs500 is making a grinding noise when the lens comes out or zooms in or out. The picture on the display is also usually very blurry. It usually shuts itself off and says "lens error"


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Casio Exilim EX-S500 Digital Camera

Zoom error The main problem with my camera is that whem turn on, the lens will not come out to zoom the focus; and in the LCD it indicates zoom error.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Fuji FinePix A330 Digital Camera

Lens Error. I didn't do anything to my Canon Powershot A1100 and now I have a lens error that will not go away. My lens is completely zoomed in and won't move. Help! 


Sometimes the lens is just stuck, sometimes it needs to be replaced. Try to mechanically move the lens in and out by gently twisting, pushing and pulling. If that fails, the gears are too misaligned to repair it without opening it. ... Canon PowerShot A1100 IS Digital Camera

Lens Error Hi, When I turn on the camera, it says "Lens Error. Restart Camera." When you restart the camera, it gives you the same message. The Canon zoom lens will not go back into the camera. Help!


If you are sure that your battery is fully charged but still does not do any good, then do this little trick:1. Hold the camera on your right hand with the lens facing the ground.2. As you press the power on button, tap or hit ... Canon PowerShot A550 Digital Camera

Zoom stuck Greetings. I'v got a Fuji S1000 fine pix that keeps sending me a 'focus error' or 'zoom error', the camera will not zoom in our out, it also does not permit me to take any pictures. is there a way that I could solve this?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a pro ... Fuji FinePix S1 Pro Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3132 seconds