Having problems with your Canon PowerShot S3 IS Digital Camera ?

Plastic tripod mount

\015 Can I replace the plastic tripod mount on my Canon Powershot s3?\015

Answers :

Thats a bummer. I don't think there is. I would check with a camera shop. You might want to try some locktite and see it that works but you will probably have to keep the tripod mount permanantly on your camera.
\015\012
Repair Help & Product Troubleshooting for Canon PowerShot S3 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The plastic tripod mount on my Fuji HS10 seems to be stripped after only mounting the camera on a tripod 2 or 3 times. The camera will no longer attach to the tripod


... Digital Cameras

Plastic tripod mount


Thats a bummer. I don't think there is. I would check with a camera shop. You might want to try some locktite and see it that works but you will probably have to keep the tripod mount permanantly on your camera.\015\012 ... Canon PowerShot S3 IS Digital Camera

I AM TRYING TO FIND A REPLACEMENT PART FOR MY Quantaray QSX9002D TRIPOD MADE BY SUNPAK. I HAVE MISPLACED THE CUSTOM SQUARE-SHAPED HARD-PLASTIC ADAPTER MOUNT THAT SCREWS INTO THE BOTTOM OF THE CAMERA... AND THE SQUARE BOTTOM FITS INTO A MOLDED RECEIEVER ON THE TOP OF THE TRIPOD. WHERE AND HOW CAN I GET ONE OR TWO MORE OF THESE ADAPTERS??? THANKS MUCH. Gary


Quantaray Tripods are sold by Ritz/Kits/Wolf Camera as their house brand. Please check with this company for replacement parts for this product. ... Digital Cameras

I am trying to find some technical information about and the specs for a Solidex Excel Series VT-87HQ tripod. I found one in my father's attic, but am trying to figure out what it's maximum load bearing weight is, what the actual tripod weight is, what size the base mount and head mount threads are, and what the product dimensions are. I can't seem to find any information about this tripod online and do not even know when it was made or what it's worth. I am trying to figure out if it will work


Here's a bit of specs from trade.co.nz:\015\012\015\012Solidex Excel VT-87-hq Tripod Tripod has clipout legs to 56" Also has a wind up head which extends the Tripod to 68" When colapsed 27" Also has an extra handle ... Digital Cameras

Tripods I want to buy a tripod for my camera but don't know what size the mount is? I have seen some for sale that are universal and say 3mm but I can't seem to find what size my camera's mount is.


The Tripod mount is universal.\015\012But if you are unsure take the camera with you to the store. ... Olympus Camedia C-760 Digital Camera

I am using the vivitar vpt 2400 tripod with my "guerilla" paint box [9"x12"x6" deep & @ 10#] the box has a metal universal plate receiver for the bolt on the plastic quick release head [QRPER] I work on a painting on the back of the opened box which is attached to the tripod The stress /racking sheered two of the four plastic "teeth" off of the QRPER head I need a metal version on the head, I think...is there one? What do you recommend?


Hi,\015\012\015\012Looking at the type of work you do , I would recomend for a metal version as the plastic would keep sheering the teeth. Yes the weight would increase by triffle and may be anoying while travelling but its worth it. ... Digital Cameras

I have a dynex DX-TRP60 tripod and I somehow lost the plate that allows you to mount the camera on it. I want to mount a kodac Zi8 HD video recorder on the tripod and I assume the standard plate will work. Can you help me? Thanks, Carol


... Dynex Digital Cameras

I just purchase a used Solidex vt-87Hq tripod, but it didn't come with a part to mount the camera on. Is that called a quick release or a mount for the tripod?


... Digital Cameras

I am looking for quick release plate for a Radio Shack RST-84V tripod made in the 90s. I looked all over (local radio shack stores and corp. head quarters) but no one has any info. Finally I came across the Solidex Excel Series Tripod. The plastic molding of the head and the label font where exactly the same so I know either it was Solidex who made my tripod for radio shack, or the company that makes the Solidex tripod. The SOLIDEX EXCEL SERIES TRIPOD VT-86HQ is the one that appears to have


I found this tripod, new, on Ebay. It looks like it would serve your purpose. I'll keep checking for you, but take a look at it- it was posted on the 22nd of May, so you have plenty of time to check it out and buy it, if you choose. Good luck ... Digital Cameras

Nikon d90 lens plastic mount broke


UScamera is temporarily out of stock ... Nikon D90 Digital Camera with 18-105mm lens

Unable to unscrew camera from mounting plate tripod


The mounting plate may have a small pin with a spring to fit certain kinds of cameras. Don't try to twist the plate off the camera, that may damage the bottom of the camera. Instead, the plate should have a slotted screw in the bottom tha ... Kodak EasyShare C875 Digital Camera

I was taking pictures outside using a tripod mounting and had my Fujifilm FinePix S5000 on in photography mode - Auto mode. Upon placing the tripod for a new photo, I observed that the LCD monitor had turned white with intermittent horizontal flashing black lines. The view through the viewfinder is also white but without the black lines. When a photograph is taken the image is white. I should point out that in Playback mode I can view previously taken photographs perfectly on both the moni


Hi,It seems ccd imager chip problem, ccd imager chip is electronics device that converts an image into electronics signal. It is located at end of lens assembly in camera.CCD imager chip will be replaced to get correct view in camera mode ... Fuji Digital Cameras

I just purchased a Sakar TR-4 Floating head tripod. Once I got it home I discovered that the "Floor" or "camera mount" (the piece that screws into the cameria and also fatst latches to the tripod) was missing. can you direct me as to how I might get it replaced?


... Sakar Digital Cameras

Replacing NIKON 55-200MM BAYONET MOUNT RING PART. I have two of the three plastic guides broken on the bayonet mount. Can i buy this part and can i replace it myself. Sam


If it's the VR lens:\012\012\012http://uscamera.com/jaa79851-b37.htmIf it's not the VR lens:http://uscamera.com/jaa79351-f.htmAs to whether you can replace it yourself, can you use a screwdriver and a soldering iro ... Nikon D90 Digital Camera with 18-105mm lens

I purchased a second hand Miranda TP20 tripod from a charity sale for a few pounds. The screw plate mounting is missing fromn the top of the tripod - where can I purchase the part from?


The giottos 6E01 quick release plate will fit snug. i bought one for my miranda tp20 today. you can get them from harrison cameras or warehouse express. ... Vivitar Pink Vivicam 3188 Camera Great kids gift Digital Camera

Lost mount for tripod can I get a new one?


Velbon QB-4W Quick-Release Platform is a nearly identical replacement for the plates that come with the Dynex tripod. You buy it from: \015\012\015\012 ... Digital Cameras

Tripod Mount Replacement part


You can visit :http://www.linkdelight.com/index.php/Support-Gears/View-all-products.htmlmaybe it can give your some he ... Kodak Easyshare C813 Digital Camera

Olympus Stylus 770 SW, stripped threads for tripod mount.


... Olympus Stylus 770 SW Digital Camera

THE THREADS UNDERNEATH THE CAMERA TO MOUNT A TRIPOD IS COMPLETELY STRIP: CAN THIS BE REPLACED. ALSO IF YOU COULD GIVE ME AN ESTIMATE TO REPAIR:


The threads cannot be replaced by the end user. Because the cameras are mounted at all sort of angles and can have very heavy loads placed on the tripod mount, they are usually built in under the body shell, or actually into the body shell. In order ... Sony Alpha DSLR-A700

We've lost the mounting plate for our RCA tripod AC031.


... Digital Cameras

Hi, I just bought an optus reflector telescope from aldi with EQ7 mount. Re the tripod, am I supposed to screw through the aliminium, the instructions are poor. Gary Coates


... Digital Cameras

Plastic mount on canon efs 18-55mm broken - Digital Cameras


Hello\015\012\015\012Not alot you can do for this one apart from replace the broken mount.\015\012\015\012Suggest you contact a local Canon repair agent for a price of repair ... Digital Cameras

I need to replace tripod mount - Fuji FinePix S5000 Digital Camera


Hi Paul,\015\012\015\012Thanks for giving Fixya the pleasure to solve your problem.\015\012\015\012\015\012You can visit this ... Fuji FinePix S5000 Digital Camera

Panasonic ag-dvx100a broken tripod mounting plate


... Digital Cameras

Back focus My D300 looked like it was focusing behind the subject. I set up 8 objects on the lawn, each one 3 feet behind the other. I mounted my camera on a tripod, selected a shallow depth of field, and shot each object. I found that at close range, my camera focused fine. The farther away the object, the more the camera focused behind the object. I returned the camera to Nikon for repair under warrantee. They made some adjustments. The focus has definitely improved, but I don't think it is qu


That's not likely to be the camera but the lens. You can actually set a focussing pre-set for each lens you use on the D300. See your manual for more info. ... Nikon D300 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0251 seconds