Having problems with your Canon PowerShot S3 IS Digital Camera ?

No lcd image for photo mode but there is an lcd image for review mode

\015 Camera still takes pictures and I can see them in the review mode but there is no LCD image for picture-taking mode.\015

Answers :

Http://gdlp01.c-wss.com/gds/9/0900001319/01/PSS3ISCUGad-EN.pdf

use DISP button to switch between viewfinder and LCD
or read the manual
Repair Help & Product Troubleshooting for Canon PowerShot S3 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No lcd image for photo mode but there is an lcd image for review mode


Http://gdlp01.c-wss.com/gds/9/0900001319/01/PSS3ISCUGad-EN.pdfuse DISP button to switch between viewfinder and LCDor read the man ... Canon PowerShot S3 IS Digital Camera

Olympus D-370 LCD comes on but will not show image in photo mode or when reviewing pictures. Icons, numbers, etc. ARE visible. Card is good. Used both batteries and pwr supply.


Camera CCD fault or the CCD connectivity is disconnected from the Panel. You need to visit a service center for visual check up. ... Olympus Camedia D-370 Digital Camera

S5000 - camera does not display images in 'review' mode - still stays in photo shoot mode


Defective ccd imager!! company will replace this ccd imager free of charge. Year 2002 up to 2005 released unit has a factry defect ccd imager. the company recalled these unit and replaced with a stronger version of ccd imager( they are still doing it ... Fuji FinePix S5000 Digital Camera

Fujifilm A330 My camera is doing something rather strange; it's always switched on by sliding the front shutter open all the way, and it's ceased turning on when I do that. My dad and I figured out that we can get it to turn on by holding the 'on' button in the back, but it won't get out of the menu/blue 'no image' LCD display for reviewing pictures. In the past, holding the 'on' button was what changed it from picture review mode to picture taking mode, and since everything has swapped around t


My switch was dirty... very dirty. I took my camera apart (NOT SUGGESTED FOR THOSE WHO DO NOT KNOW) and cleaned it which was NOT the easiest job. I would take it in to get it serviced if youw ant to play it safe. Take it apart only if you expect to n ... Fuji FinePix A330 Digital Camera

When i try to take photo the the LCD screen is blank. Theis happen after i changed the battries. I can review previous photos on the screen however when i go the take Photo mode the screen is dark.


It is ccd imager chip failure problem that need to be replaced.Canon offers free of cost ccd imager chip replacement for same problem in many models, click Canon Support for details to get free of cost repair offer.Thanks. ... Canon PowerShot A610 Digital Camera

I was taking pictures outside using a tripod mounting and had my Fujifilm FinePix S5000 on in photography mode - Auto mode. Upon placing the tripod for a new photo, I observed that the LCD monitor had turned white with intermittent horizontal flashing black lines. The view through the viewfinder is also white but without the black lines. When a photograph is taken the image is white. I should point out that in Playback mode I can view previously taken photographs perfectly on both the moni


Hi,It seems ccd imager chip problem, ccd imager chip is electronics device that converts an image into electronics signal. It is located at end of lens assembly in camera.CCD imager chip will be replaced to get correct view in camera mode ... Fuji Digital Cameras

D40X Upon switching modes to review photos that have been shot, I can retrieve the images, but after a second or two they each start flashing part of the image (this part appears to be the lighter areas of the picture). How can I turn this off and go back to viewing the image "regularly"?


That is the highlight warning. When viewing the photos, just press the up arrow to cycle to the mode of view you want. ... Nikon D40x Digital Camera

My Canon PowerShot A85 no longer shows scene on the LCD screen before shoot nor immediately afterward and records a blank on the memory card. Photos taken before this problem started can be viewed on the screen in review mode. Otherwise camera feels normal, i.e. turns on and off, zooms, sounds like it recorded a photo.


I called Canon customer service. Problem is likely due to a defective CCD image sensor. The camera is well beyond warantee, but they will fix it free including shipping both ways. No proof of purchase needed.I can't get the web site pasted i ... Canon PowerShot A85 Digital Camera

My SD800IS was working fine while in the very hot/humid environment of Yap. I took it out of my air conditioned room and went to take a picture almost immediately. The view finder, the LCD image and the lens were all fogged. The camera worked but took foggy images. Eventually the fog cleared and my photos were fine but most of the controls no longer work. I can change the selector knob that determines if the camera is on auto, manual, video or display modes but it won't zoom and the program


The foggy images and lens was due to condensation caused by the camera's surfaces being cold in a humid/moist environment. Usually this happens and goes away without issue. If you believe issues are continuing, consider placing the camera completely ... Canon Digital Cameras

I have a Kodak Easyshare model dx5430 digital camera (5mp). It has worked like a champ for years. Last night I was at an event when the image display went dark at picture 31. All preceding photos were able to be reviewed. The camera flash works fine. The camera displays all the other characteristics of a working unit. It turns on and off; the flash works, the menu is accessible - everything. It just doesn't register any photos. Even in close-up mode, there is nothing. It's as if the lens cap is


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot A75 Digital Camera

I have a power Shot A70 camera. The lcd monitor works in reviewing pictures already shot but does not work in the shooting picture mode. I can get the settings and all that in the shoot mode but no image


See this link. Instructions for contacting Canon are for US residen ... Canon Digital Cameras

The LCD on my DMC-TZ5 looks like someone ran the image through one of those turn-your-picture-into-a-cartoon filters. The problem is present in both record and review modes (and menus too), both for still pictures and video. It does not affect the actual pics/video once downloaded to the computer; it's just a problem with the LCD display. It developed this problem after I took it to a repair shop to fix a stuck lens shutter/cover thingy. Before I take it back and accuse them of screwing somet


Hi,As you mentioned that once you downloaded the pictures to computer it was fine, that confirms that CCD sensor is fine. Moreover, as you could not see the saved image / picture properly confirms that this is a problem with LCD. Unfortun ... Panasonic DMC-TZ5 Digital Camera

When I turn my camera on, the lcd doesn't display. I can review an image though in the play mode. any ideas??


Rebel XT doesn’t have live view function. You cannot have picture on LCD when taking picture. If you can review the pictures and operate menu on LCD, your camera just fine. ... Canon Rebel XT / EOS 350D Digital Camera

LCD screen shows no image while in picture taking mode. I can review previously taken pictures but I can't take any picture


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A60 Digital Camera

When I take a photo with my Nikon D90 in auto mode and flash i get a dark spot on the bottom of the image on the lcd that resembles a shadow. there is no shadow in the picture. What is casuing this?


This is more than likely a shadow from your lens. The on-camera flash is in a fairly low position, and I am able to duplicate your description when using my D200 on-camera flash and a physically longer lens- in my case a 28-70 F2.8 lens. Using a hot- ... Digital Cameras

No image on LCD screen, only irregular lines of varied coloring. When picture is snapped, it is of these lines--no image. Help. Details: I turned the camera to shooting mode but it does not display the image of what I want to shoot, but just a series of horizontal lines. If I take the shot, it shows the lines which were displayed on the LCD screen. If switched to playback mode, previously shot images show up fine. I checked the batteries; they were fine. I replaced them anyway, to no avai


I have the same problem and after doing research, I found this website. ... Canon PowerShot S1 IS Digital Camera

I have 2 Sony cameras with problems..one is a DSC-T1..there is no picture when in the camera mode..will display pictures made earlier..lcd is blank in camera mode. The other camera is DSC-F717..Camera has hardly been used..in camera mode the lcd only shows a smeared image..the image is not recgonizable. Strange conicidence, but both failed nerly at the same time.


Hi kd4kdp,\015\012Both of your camera have bad CCD Imagers and must be replaced. Good news for you is that Sony will replaced these parts free of cost. Check more details on following Sony web link. Have nice day.\015\0121= ... Digital Cameras

Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.


Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera

LCD on - view image prior to taking photo


The feature you are referring to is called "Live View mode".This is NOT available on the Nikon D80, and was only introduced on the D90, which is available now.Live View mode allows you to use the LCD screen as your view finder ... Nikon D80 Digital Camera with 18-135mm Lens

LCD shows gray in all modes, cannot take photos


Reset settings to factory default ... Samsung Digital Cameras

Image quality Hi. When I'm taking photos and set my exposure manually on my Canon 20D, the image looks right exposed on my LCD screen, but when I download all the photos on my PC, all the photos are VERY DARK. This takes lots of time for me to edit it and then after I've got the right brightness on my PC I discovered that the image quality is VERY BAD!!! There is lots of noise on the image. Can someone help me to find a solution to correct the exposure on my camera, so that I can save time on my


Hello there,\015\012\015\012If you are correctly metering the exposure of your photos, and you suspect it may be the camera, try resetting the camera to its default settings using the menu. Clearing all the custom functions as well can sometime ... Canon EOS-20D Digital Camera

LCD screen purple and distorted in Shooting mode


There is recall on this model for this problem, Go to Canon USA web site, Look up Service advisory, CCD malfunction N/C to repair. ... Canon PowerShot A80 Digital Camera

I own a canon powershot S3 is and I am getting this strange E24 error where in the camera lense would comes out and just goes in . Another interesting thing I observed is when the LCD is on and I am in the image display mode (That is browsing the existing images) then there is no problem if the LCD panel is open or closed the camera just seem to respond normally, only when I change to the shooting mode the camera lense would come out and go in with the camera shutting down. what is problem with


It sounds like it needs to be serviced. If you're out of warranty, then go to this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they ... Canon PowerShot S3 IS Digital Camera

Lcd display not working on nikon d40. When we turn on the camera, and take off the lens cap, the lcd display is black. we can use the viewfinder to take a photo. We can view the image after taking the photo, but can not see the image prior to taking the picture.


The D40 works the same way SLRs have worked for the past half century. Only recently have dSLRs acquired a "Live-View" capability, where you see the image on the LCD monitor instead of through the viewfinder.I realize this probably wasn't ... Nikon D40x Digital Camera

Help No image in the viewfinder or on the lcd screen when in shooting mode. Have amber light rather than green. In playback mode images appear on lcd screen. Was working fine the last time I used it and have changed the batteries to newly charged. Have also reset to default settings.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot S1 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2353 seconds