Having problems with your Canon PowerShot S410 / IXUS 430 Digital Camera ?
The switch from camera setting to view picture taken setting isn't working properly. It just stays on the camera setting.
\015 The switch from camera to view pictures taken on the canon powershot s410 doesn't seem to be working. It just stays on the camera setting.\015
Try to read tha user manuel and try again
Repair Help & Product Troubleshooting for Canon PowerShot S410 / IXUS 430 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The switch from camera setting to view picture taken setting isn't working properly. It just stays on the camera setting.
Try to read tha user manuel and try again ... Canon PowerShot S410 / IXUS 430 Digital Camera
Blurry pictures My camera has two settings on the front. One is to take still pictures, such as flowers, the other setting is for action shots. My camera will not switch back to the action setting. There is a switch on the front of the camera. I have switched it to the right position, and it won't work. I have also taken the batteries out of the camera and switched it again. No dice. This sucks because I am missing a lot of good pictures of my kids. please help.
Hi:Try this... Go to the setup menu and RESET ALL. Then test.If this does not make a diff.then the camera may need repair.Here is a support you could call or email:Go to:\015\012http://vivitar.com/en-us/Support.aspx ... Vivitar ViviCam 5100 Digital Camera
When Mode switch is set to take pictures or clips, the camera shuts down in less than a second after I turn it on. If the Mode switch is in the far-left position (review pictures already taken), it stays on and I can see all the pics in the camera, but as soon as I switch to picture-taking mode the camera shuts down.
Since u say ur having difficulty reassembling the unit back.... please refer the following.... it shows disassembly procedures for a similar model camera... this is as far the closest i could find to help you reassembling the unit... just apply rever ... Sony Cyber-Shot DSC-S40 Digital Camera
Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli
Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera
Kodak V1003 A few weeks ago, shortly after I'd taken a pic, the lens refused to retract and the camera switched off. It has never been dropped or had anything spilled on it. Strangely, when I press the button furthest left the camera comes on, allows me to view pictures on the card, set the time etc - everything except take pictures. Again when I try to switch off, the lens does not retract. Does this not suggest a software glitch of some kind?
No, unfortunately that is a problem with the hardware, software would not prevent the lens from retracting.\015\012\015\012If it is within manufacturer's warranty (usually 1 year) take it to any Best Buy they will send it out to the mfg f ... Kodak EasyShare V1003 Digital Camera
Frozen Camera I have a Panasonic Lumix TZ3 digital camera. The last time it worked, the screen went checkered, so i turned it off. But upon turning it off, the lens of the camera stayed out like it was taking a picture. Now it won't turn on. I've tried recharging the battery, changing memory cards, no memory card, switching settings and turning the on/off switch. Is there anything to be done or I do I just need to get a new camera?
Try letting it drop about 4 tto 6 inches on a hard service covered by a paper towel. Don't let it land on lens of course. You can remove the mem card. It has 13Meg of internal. ... Panasonic Lumix DMC-TZ3 Digital Camera
Black LCD When I took pictures yesterday, each picture looked like it had a white fuzzy covering over it. Now when I turn the camera on the lcd stays black. But when I switch the button from camera to video it works. I also can get the previously taken pictures to show up. I have charged and changed a couple of pairs of batteries.
As Philipp mentions, sounds like a defective CCD imager. Canon should fix this for free, including free shipping both ways. For others experiencing this problem, please check the following two links for more info:\015\012http://camerarepair.blo ... Canon PowerShot A300 Digital Camera
No image my camera works as far as viewing what is on the memory stick, and settings can be changed also however there in no screen image when you try to take a picture and when you do the image is just black. brand new batteries put in. can view memory card pics but have a blank screen and it switches off when i put it onto photo setting
While in picture taking mode, press that button. It will restore your viewer. ... Sony Cyber-Shot DSC-P73 Digital Camera
Hello - My Olympus SP-550OUZ Camera was in a rucksack which slid of my shoulder and hit the ground. Although there is no obvious damage to it, nothing cracked, no marks etc., it has stopped seeing properly. Pictures already taken can still be viewed either in the viewfinder or the screen both work perfectly. The lens moves in and out not problem everything seems to work fine except when you look to take a picture either by viewfinder or the lcd screen all it sees is a blurry hazy purple pictu
... Digital Cameras
Powershot SD1000 Cannot get an image on the LCD Monitor while in camera mode but previous pictures can be viewed normally. Other functions of the camera appear to work properly. I replaced battery--no change. I feel it may be a setting issue but I really don't know. Is there a way to default the settings?
HI there when you go for click the image that time on your LCD screen. Right now its off and its in viewfinder mode. So press the switch for LCD on so , you can see the image in LCD in camera mode. Thanks. ... Canon PowerShot SD1000 Digital Camera
When I switch the camera on the screen stays blank even though the lens comes out, it eventually goes off (with the lens still out after about 40 seconds). I can get the camera to work if I press the green "view" key and then, after the picture appears, press the red camera icon and it will go into auto shoot mode. Happens every time now. I can't take it in under warranty as it was a present and I don't have the receipt unfortunately.
Replace the batteries then check ... Olympus FE-170 Digital Camera
Blank LCD screen on shooting mode, but does show settings. Will not take pictures. Replaying mode works, shows pictures taken before screen went blank. New batteries. What is going on??? Is it fixable? I bought the Canon PowerShot A570 IS. I don't know if it is me or the camera but my LCD screen doesn't stay on. I can take a phote, the photo will then display on the LCD for 2 seconds BUT then the LCD goes blank, all i can see are the menu options. If I take a pic while LCD is blank my pic's
The Display button manually turns the LCD display on or off to save batteries. If you accidentally had turned the LCD off, It should only take one press of the button to turn it back on and leave it that way. As such, it's not you but the camera. ... Canon PowerShot A570 IS Digital Camera
Camera when turned on zooms to 16x and is stuck, won't take pictures, won't pull up menu, won't do anything except turn off or switch to view of previously taken photos. How can I override this to pull up menu to restore defaults, or otherwise get camera working again. thanks.
Hi, Check and/or replace batteries. If lens is stuck slowly and carefully force it back in. Good luck. ... Digital Cameras
My sony I just got a DSC-S40 from a friend. I actually swoped my previous camera for this one. When I switch it on, the lens seems to get stuck and not come out all the way. I makes a grinding noise and does not show any picture on the screen. The flash goes off when I push the button, and the little guide dots on the lcd screen shows, but the the screen stays black. I am able to view the photo's that are on the camera taken before this problem, but am unable to take any photo's now. The shutter
I can fix your camera, it is not an easy thing to post because the post would be forever long....$20 and it would be good as new. ... Sony Cyber-Shot DSC-S40 Digital Camera
Kodak 4GB memory card not working when palced into camera. The words memory card is protecetd(Reset switch on memory card) appears on camera view area. It does not allow picture to be taken.
... Digital Cameras
A85 Dead During a normal session, switching from picture-taking mode to view mode, the lens would not retract and the picture in the view froze with the current image. I could not turn off the camera. After a while, the batteries got very hot, so I removed them. I took out the CF card. Later, I replaced the batteries and the put the card back in. The camera worked very briefly, but the LCD view would not work, displaying flashing lines on a black background. New batteries didn't help. The camera
I read something about the fuse going out...http://www.dcresource.com/forums/archive/index.php/t-18151.html ... Canon PowerShot A85 Digital Camera
This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.
You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera
Lcd blurred I have a canon power shot a80 and when i turn it on and try to take a picture, on the LCD display i see a mixture of colour which is not even letting me see the image of the picture i would like to take. If i look through the lens and take the image, i am still able to view the picture I had taken if i set the camera on the view pictures. The mixture of colours on the LCD only shows when the camera is set on take the picture... and it doesn't even do it always. Thanks.
Canon will fix this camera if it is in the list of ccd defect. Contact canon.com for the Americas, or where you are. Call Service on the web page with the 800 number.http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&am ... Canon PowerShot A80 Digital Camera
When i turn on the camera the lens wont pop open even when the battery is fully charged.... i was taking pictures and it working fine turn the camera off and on again then the lens wont open anymore? i can still view all the pictures i took from the camera but cannot take pictures anymore coz of the lens wont open. i tried initializing the camera by going to set up it didnt work..msg error said turn the camera off and on again and i did but didnt work either many times i tried please help thnks!
The problem is\015\0121- some dirt somehow got on the outside of the lense. After it was retracted fully in, it prevents the camera from opening again. When you turn it on, if it opens a little bit, try to pull it out NOT too hard and let go ... Sony Cyber-shot DSC-N2 Digital Camera
I have an Olympus FE-330 The problem I am having is when I take pictures at night, focusing on anything is impossible. The view shows black, until the picture is taken. After the picture has been taken it shows a great view of the picture in the screen. Even changing the setting to night, does nothing-it's black I honestly was thinking of replacing the camera for this reason, it is very frustrating. Other than that, it is a great little camera.
Take a flashlight with you and shine it on what you want to focus. Press the shutter half-way, shut off the flashlight and press the rest of the way. ... Digital Cameras
When the camera is on it's base and plugged in you can view a slide show. when it is not plugged in you can not switch it on to view anything or take any pictures but the green light still works when you try to switch on. It happened on holiday recently when a bit of sea water hit the camera lens. The camera was very hot and kept on saying battery is low. so when i got back to London i bought a new battery for it but nothing still works.
My camera got slightly wet by ocean water and will not work. It sometimes starts to turn on (once even taking a picture with no LCD screen), but mostly is dead. Could this just be a battery problem? Can a battery get ruined by a little saltwater w ... Fuji FinePix S7000 Digital Camera
Canon powershot A520 doesn't work in camera mode. I can look at and edit pictures in viewing mode, but switching to "camera" won't let me take pictures... in this mode it also lets me view pictures already on card, so something isn't making the switch over.
Hi!\015\012Do other buttons work? If so, the switch could be broken because it sounds it doesn't switch to the CAMERA mode, just stays at the VIEW mode.\015\012If you're not experienced in repairs, you should give it to a local repair sho ... Canon PowerShot A520 Digital Camera
My Finepix s5800 camera won't turn on properly. I slide the power switch and the green light comes on for about 2 seconds then turns off. But I turn the playback button on, and it lets me view the pictures. I tried recharging the batteries, cleaning the battery terminal and making sure it isn't on the viewfinder setting. Help?
... Fuji Finepix S5800 Digital Camera
Pretty much constant but sometimes intermittant problem of the camera fe-210 screen goes black. all functions appear to be normal but it does not see through the lens. So everything is black on the pictures taken. It's like the opening is shut. Sometimes it will work when first turned on for one or maybe two exposures. then it goes black and may stay that way even if turned on and off or changing any of the settings.
Hi,Would you be able to View Recorded images / Video's ?If\015\012\015\012\015\012 yes, this is a Faulty CCD Sensor. This is a Common Problem on almost \015\012all the Brands like Sony, Kodak, Canon. There were Certain Recalls ... Olympus FE-210 Digital Camera
I have a canon G9 which was working great. When I turn the camera on, all the settings come up on the screen but there is no view. when you take a picture it is black. I can look back at old photographs taken with no trouble. Have I turned something off by mistake?
Same issue. Anyone have a solution? It was not the display button. ... Canon PowerShot G9 Digital Camera