Having problems with your Canon PowerShot S410 / IXUS 430 Digital Camera ?
Flickering image on LCD lens of my Canon S410
\015 Hi, The image on the LCD lens of my camera is FLICKERING constantly when I try to shoot the image. But after shooting the picture, when I try to review the image, it is STABLE. Anyone has an idea, what is the cause of this. This is happening in my Canon S410 powershot camera\015
By the sounds of it you have a bad chip on your camera system board. If the image records okay and displays okay after the image is recorded. Other than having your camera repaired you may have to use your camera as is.
Repair Help & Product Troubleshooting for Canon PowerShot S410 / IXUS 430 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Flickering image on LCD lens of my Canon S410
By the sounds of it you have a bad chip on your camera system board. If the image records okay and displays okay after the image is recorded. Other than having your camera repaired you may have to use your camera as is. ... Canon PowerShot S410 / IXUS 430 Digital Camera
I have a Canon XM3 camcorder. It has given me many years of good service. Recently it has developed a fault. When I switch it onto Camera mode, and then flip the switch to Standby, the small screen flickers blue for a short time, but it does not show the image from the lens. If I switch off, and sitch to Playback, the small screen works OK and all the Playback works fine. Sometimes when I switch to Camera, and Standby, the small screen flickers blue, and then an image from the lens appears, but
Its the problem of CCD assembly\015\012CCD (image sensor) failures, particularly in conditions of high heat and humidity, led to cameras capturing images with either no picture at all, or with extreme distortion and se ... Digital Cameras
Lcd blurred I have a canon power shot a80 and when i turn it on and try to take a picture, on the LCD display i see a mixture of colour which is not even letting me see the image of the picture i would like to take. If i look through the lens and take the image, i am still able to view the picture I had taken if i set the camera on the view pictures. The mixture of colours on the LCD only shows when the camera is set on take the picture... and it doesn't even do it always. Thanks.
Canon will fix this camera if it is in the list of ccd defect. Contact canon.com for the Americas, or where you are. Call Service on the web page with the 800 number.http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&am ... Canon PowerShot A80 Digital Camera
Canon Powershot A610 digital camera--LCD screen shows icons, but otherwise is blank--there is no visible movement in the lens when I take a picture without flash--have tried setting it on TV setting and taking a picture, then opening the battery cover for a few seconds after waiting 7 seconds or so, but no images on the LCD except the camera's icons--ideas? probably a stuck shutter, or is it still possibly the CCD sensor even though there's no visible movement in the lens? Ideas? Thanks!
Much more likely that it's a stuck shutter, especially for your model camera. How many tries did you give the fix? Some people stated that it took at least 15 repeated tries before the shutter opened:\015\012\015\012\015\012 ... Canon PowerShot A610 Digital Camera
Have canon Powershot A75 3.2 Mega pixel camera .. Now it is having display issue. Once i open my camera lens come out power come but unable to see the image in lcd to shoot.. Can you assist
First try pressing the DISPLAY button. If that doesn't fix it then this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty st ... Canon PowerShot A75 Digital Camera
Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig
That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera
Lcd screen the screen illuminates,but it doesn't display anything. I have a canon powershot SD110 digital elph. When I turn the camera on the lcd lens illuminates but does not display images. I cannot take new pictures but can view previous one. Menu options occurs on the screen and can be changed. I have misplaced my information booklet and do not know what to do to troubleshoot this problem and if it can be fixed.
Cannot get images deleted ... HP PhotoSmart M437 Digital Camera
NO image appears on LCD screen - Canon PowerShot S410 / IXUS 430 Digital Camera
... Canon PowerShot S410 / IXUS 430 Digital Camera
I have a canon powershot s60..a few years old, when taking photos it has started having lines over the image, and the lcd screen isnt clear and flickers slightly...is it time to replace the camera or can the problem be fixed!
You may be having image sensor (CCD) issues. Canon issued a service notice a while back that applies to your model among others. If Canon determines that this is the problem, they will repair your camera at no cost regardless of warranty status. See ... Canon Digital Cameras
Canon Powershot SD750 powers up fine; lens extends fine. The LCD is black. I can see a faint image - enough to enter the menu and change settings. Increasing brightness has no effect. Seems like the screen has gone bad. Any suggestions??
It's not the screen, but its backlight that is the problem. It's likely a poor connection of the ribbon cable in its connector socket. This problem will require either professional repair, or your opening the case to reseat the backlight ribbon cab ... Canon PowerShot SD750 / IXUS 75 Digital Camera
I just bought a Canon 450D and followed the setup instructions, but when i take a picture nothing is displayed on the lcd and the image stored is blank? The camera is set to auto, lens cap is removed, SD cards(tried multiples) were low level formatted, battery has a good charge, flash is working.
Sounds like you got yourself a defective CCD sensor inside the camera because you should have got output on the file and on the LCD.\015\012\015\012Read the advisory from canon below.\015\012\015\012 ... Canon EOS 450D Digital Camera with 18-55 Lens
I have a Canon Powershot A70 digitical camera. It is about five years old.I use re-chargeable batteries.I use the camera periodically usually having to recharge the batteries before use. However when I placed the batteries in the camera the lens extended but there was no image on the lcd. The flash still works but the camera won't take a photo.
Hi, \015\012You said that Canon A70 has blank screen and takes blanck picture. Its issue of bad CCD Imager in camera. Canon announced a scheme to repair this problem free of cost. Please click on ... Digital Cameras
My didgicam is Canon IXY Digital 5mp AiAf. Once i've turned on the camera there are no images coming out in the LCD and when taking pictures... is the lens broken or just a tweak o settings?
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot S500 IXUS 500 Digital Camera
New Canon Rebel xsi with a EF 85 mm lens and there is No image on LCD panel when the camera is turned on
HiI don't have an XSI here to look at, but it sounds like you just need to turn on the LCD, it's in a power save mode. Look for the "Disp" button and give it a push. (top left, beside the Menu button)Hope this fixes the proble ... Canon Digital Cameras
Black LCD Image w/ flickering static lines
Http://esupport.sony.com/perl/news-item.pl?news_id=161&mdl=DSCU20 \015\012\015\012Go here and you can get a request fo ... Sony Cyber-Shot DSC-U20 Digital Camera
My camera comes on and the LCD display is fine but the camera does not pick up images. The LCD screen is black where an image should appear like something is in front of the lens but nothing is obstructing the lens?
... Sony Cyber-Shot DSC-T1 Digital Camera
Hi all, I wonder if you can supply some advice regarding a Sigma17-35mm lens I purchased earlier in the year. Basically if I use the automatic or 'P' setting on my Canon EOS 30D camera the image is over exposed by 1 to 2 stops. If I use the same functions with my Canon 18 -55 kit lens the exposure is correct so I would presume the camera is not causing the problem. The only way I can get a correct exposure with the Sigma lens is to compensate manually for each shot. Please note the exposure p
Try your EOS in AV (aprature value) mode. You should be able to adjust your aperature value in 1/3 or 1/2 steps dependind how you have your Custom Functions set in your camera's menu. Possibly the lens you purchased is for an EOS 35mm. If you use a 3 ... Sigma Digital Cameras
Lens is open and won't retreat back inside. I turn the power on and makes a funny clicking noise like its trying to retract the lens back in. After three seconds of this it says "lens error, restart camera". Its a canon powershot SD790 IS digital elph with image stabilizer. Canon PC1261...don't know if that helps.
I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/ ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera
Lcd flickers the lcd of my canon 400d flickers sometimes i dont see anything on it, if i press the body the display appears and then lost again. What can be the problem of the lcd?
Hi\015\012\015\012the 400d has a sensor just below the optical view finder\015\012it detects when you face is near the view finder and turns off the lcd scren\015\012\015\012the display button (top left) can manually tur ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens
Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.
Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera
I have a canon sd 750 have been using it for 4 months now, but yesterday the screen went black i can see the old picturs i took but cant take any new pictures all the new pictures i take are black the LCD is gone black the lense is moving but no image on the LCD i can see the menu and settings but no image from the lense
OK, SORRY I DIDN'T KNOW WHAT KIND OF MEMORY YOU HAD IN THE CAMERA. I WAS HOPING THAT WE MIGHT HAVE A SIMPLE PROBLEM FOR YOUR SAKE AND WE COULD GET YOUR CAMERA UP AND RUNNING FOR YOU AGAIN. NOW, IT SOUNDS LIKE YOU NEED A PROFESSIONAL TO TAKE A LOOK AT ... Canon PowerShot SD750 / IXUS 75 Digital Camera
Shadow on image yet nothing in front of camera. It is in the middle at the bottom edge of the image. It only appears when I set the lens so that it is all the way in at 17. I have a canon ef-s 17-55 f2.8 lens. If I move it to say 20 it disapears. Camera is rebel xsi.
Most likely it is dirt/dust on inside the lens. If it is in the bottom of the picture, the dirt will be on the top edge of the lens. If it is inside the lens, you will probably not be able to clean it your selves. ... Canon EOS Rebel XSi Digital Camera
Lcd display not working on nikon d40. When we turn on the camera, and take off the lens cap, the lcd display is black. we can use the viewfinder to take a photo. We can view the image after taking the photo, but can not see the image prior to taking the picture.
The D40 works the same way SLRs have worked for the past half century. Only recently have dSLRs acquired a "Live-View" capability, where you see the image on the LCD monitor instead of through the viewfinder.I realize this probably wasn't ... Nikon D40x Digital Camera
Canon s21s I bought my camera in March 2006 and have not had a problem until 2 weeks ago. Both the viewfinder and LCD screen are black when trying to take a picture but the icons remain on the screen. The lens continues to pop out so obviously something in the lens shutter is not opening up. But previously taken photos are visible with the playback mode. Has canon offered any help yet?
Think that you mean the S2 IS? If so, Canon has not yet to offered an advisory repair of that particular problem (although many people think they should as this seems to be quite a common problem for the S2). There are however some simple things tha ... Canon PowerShot A75 Digital Camera
My Samsung TL220 lens won't close. It doesn't display an image on the front or the back. However, when I trigger the menu, the lcd displays "No Image File". It does go through and displays all the different menu options, so the lcd must be o.k. Could this be fixed with software or software update or do you think this is a hardware problem? ( I've noticed several TL220 that have this problem.) Is it an easy fix & how much do you think it would take to fix? Thank you.
Well, there must be a setting that was unintentionally set. First, I need you to try restoring the camera to its default settings. Go to Menu settings and then choose Reset. Let me know if this works or not so that we can move forward to other fixe ... Samsung DualView TL220 Digital Camera