Having problems with your Canon PowerShot S60 Digital Camera ?

Black LCD display on Canon Powershot S60

\015 I have no live LCD display on my Powershot S60. The screen is black, with only the function icons displaying. I can view previously taken images, but when I try to take a new photo, all I get is a black screen. Any thoughts?Thanks,Bob\015

Answers :

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:
\015\012 
\015\012http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
\015\012 
\015\012http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
\015\012
\015\012Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500
Repair Help & Product Troubleshooting for Canon PowerShot S60 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Black LCD display on Canon Powershot S60


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot S60 Digital Camera

Canon PowerShot S60 when turned on plays melody and displays ''Cannon'' on screen - then freezes.. Will not take pictures. Will not run off and will not retract lense. Then it reboots itself - plays a melody and displays ''Canon'' on LCD and repeats.


... Digital Cameras

No Lcd Display on Canon PowerShot S60 Digital Camera


Take a picture and download it to your computer. If the picture also shows up as black then your camera probably has a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your ... Canon PowerShot S60 Digital Camera

Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.


Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera

My canon powershot a1000 when turned on, displays a black screen with icons. its not like this before. normaly when i turn it on, i can see the view from the lcd but now no more. but everything seems to work as normal except for the black screen after turning it on. my trick is to press DISP in order for me to see the lcd display.pls help. thanks


... Canon Powershot A1000IS Digital Camera

I have a Canon A75 Powershot in excellent condition. Since yesterday it dosn't work. When it is in capture mode, I cannot see the picture from the LCD display. Display is working. When I try to take picrures I get a black picture with nothing on it, just like I am capturing in a very dark place. But I can see pictures that I have captured before the problem. What can I do? I am Christos, from Cyprus. Is there anyone who can fix this problem with my camera?


CCD is gone.Need replacement. ... Canon PowerShot A75 Digital Camera

LCD display is on black screen? - Canon PowerShot S2 IS Digital Camera


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot S2 IS Digital Camera

Powershot A460, LCD picture is black but display options appear


Have you tried pressing the Display button on the back? ... Canon PowerShot A460 Digital Camera

My LCD goes partially black when I turn the camera on and shows a diagonal display of the photo from the upper left hand to lower right hand corners. The amount not black is not sufficient to take photos. I can make the LCD give a full display if I "jiggle" the photo settings devise from view to photo. I have tried this about thirty times and it always restores the LCD. I asked Canon Service Tech Support if the problem merited repair. Of course they said yes, but the flat rate they charge


Hi , i think you need a lens alignement;;\015\012and focus adjustemt\015\012hope that will help...\015\012goo lucks;;but if iw\015\012as in your place\015\012i will try to find another one the price get very low for this ... Canon PowerShot SD800 IS / IXUS 850 IS Digital Camera

LCD Display I haven't used my canon for a while - I've just turned it on and though the LCD display works to show pictures I've taken and the settings screen - I can't see anything in it when I take a picture (it's just black) when I press the Disp button it just switches from a black screen to the settings screen - please tell me what I can do so that I can see the image in the LCD before I take the picure. Thanks for your help


As far as I am aware, the 400D doesn't have a live preview mode.What you are describing is perfectly normal and is how 99% of digital SLR cameras behave.Are you sure it used to do this?Matt ... Canon EOS 400D / Rebel XTi Digital Camera

Canon Powershot has black LCD screen


Dear All,\015\012I solved my problem for Canon Ixus 750, i gently tap 3-4 times the camera in my sofa. I think the shuter was stack! Was stupid i know but is works perfect now! ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Sd110 lcd My LCD did not work, canon repaired it....GREAT! but 2 weeks later it died. It was blank so I send it back and canon says they want money to fix. Damn.. It still takes photos with no problem. I cannot access any functions because the LCD won't work. I've tried the Display button and got the black and white screen of death. I have to take the card out to transfer photos. Canon says"UNIT HAS IMPACT/PRESSURE TO LCD". Do I need a new LCD or what. thanks, steve stokes


I have had my LCD screen go out in my small point and shoot as well, though i did not even bother with my company for the warranty was far expired. You could do a couple things. You could buy an LCD screen off ebay, or anywhere you can find it ... Canon PowerShot SD110 / IXUS IIs Digital Camera

Hi.I have a Canon Powershot S5 IS.When I turn on the camera, the little display seems not to focus and when I open the big display, there appears a black screen.I restored the factory settings and the big display is working fine, but the little display has the same problems.I think that a firmware update would be perfect, but I didn't find any update on Canon website.What can I do?


... Canon PowerShot S5 IS Digital Camera

I have a Canon Powershot 5S IS. The image on the LCD screen is not rotating when I rotate the screen, and when I snap the screen into place with the LCD side out it goes from displaying on the LCD to displaying on the viewfinder. It was working properly before, but I can't figure out how to get it back to those settings.


On camera menu, turn on Reverse Disp. ... Digital Cameras

Canon Powershot SD1000: LCD screen display


Hopefully you resolved this already. If not, push the "DISP." button left of the MENU button. Pushing it gives you three options: black (for discreet shooting so your LCD doesn't give garner dirty looks from fellow concert goers), liveview, and livev ... Canon PowerShot SD1000 Digital Camera

My canon powershot a95 display screen does not show an image when I am trying to take a picture. The image that is displayed is black with white lines and varies in the amount of black and white. No matter what setting I turn to, I can not get the image to appear. It had been working fine till a couple of days ago. It has not been dropped. I get the same result when trying to view a picture of a card. Is there any way to reset the camera?


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera

Lcd screen the screen illuminates,but it doesn't display anything. I have a canon powershot SD110 digital elph.  When I turn the camera on the lcd lens illuminates but does not display images.  I cannot take new pictures but can view previous one.  Menu options occurs on the screen and can be changed.  I have misplaced my information booklet and do not know what to do to troubleshoot this problem and if it can be fixed.


Cannot get images deleted  ... HP PhotoSmart M437 Digital Camera

Nchatta Hello, My Canon s45 was working perfectly until it was dropped from a very very small heigh in a soft leather case with protection. The camera works in the sense that it can read and display the images from the SD card perfectly, the lense extends but you cannot see anything on the LCD when wanting to take a picture bar a white box in the middle that usually turns green once focussed (but now doesn't.) The screen is just black. The shutter clicks, takes the picture, but just a black LCD


It seems like if u see icons on lcd then sorry to tell u i think ur CCD is gone it seems like , but to make it sure first get the lens checked but iam pretty sure abt the CCD bcoz it is risky in impacts and jerks ... Canon PowerShot S45 Digital Camera

Blank LCD screen on shooting mode, but does show settings. Will not take pictures. Replaying mode works, shows pictures taken before screen went blank. New batteries. What is going on??? Is it fixable? I bought the Canon PowerShot A570 IS. I don't know if it is me or the camera but my LCD screen doesn't stay on. I can take a phote, the photo will then display on the LCD for 2 seconds BUT then the LCD goes blank, all i can see are the menu options. If I take a pic while LCD is blank my pic's


The Display button manually turns the LCD display on or off to save batteries. If you accidentally had turned the LCD off, It should only take one press of the button to turn it back on and leave it that way. As such, it's not you but the camera. ... Canon PowerShot A570 IS Digital Camera

Our canon rebel T3 LCD will not display the menu or field of view. We can see the field of view thriugh the viewfinder only. The LCD does work in the video mode, so it is not that the LCD is broken. The LCD is totally black in all picture taking modes. Thanks.


... Canon EOS 1100D / Rebel T3 Digital Camera

Have canon Powershot A75 3.2 Mega pixel camera .. Now it is having display issue. Once i open my camera lens come out power come but unable to see the image in lcd to shoot.. Can you assist


First try pressing the DISPLAY button. If that doesn't fix it then this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty st ... Canon PowerShot A75 Digital Camera

No display on screen canon powershot s60


Test ... Canon PowerShot S60 Digital Camera

Canon Powershot A70: LCD screen went blank - I can still access all menu functions (timer, resolution etc), but the screen is completely black otherwise. If i take a picture using the manual view finder, all i get is a completely black photograph. Occasionally, i see a glitter or two on the screen which is black and white (kind of like an unsynced TV image), but then it disappears pretty quickly


I had a A70 that would still take pictures, but the screen did not show a picture. I did some research and found that this is somewhat a common problems with some of the Canon Powershots to include the A70 where the LCD screens expire. I believe th ... Digital Cameras

Blank lcd I just got a new canon 600D. After playing with it for a while, i turned it off. Then after 5-10 mins i turned it on once again, and opened the lcd screen, but it shows blank(or say black). I can see that the lcd backlit is workeing, but nothing (no content) is displayed. Can this be an issue of low battery ? pressing the shutter button full also not capturing the picture. Flash works though, and optical view finder too, but it does not capture the photo.


Hi there:Some symptoms of a defective CCD include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. ... Canon EOS 600D Rebel T3i Digital Camera

The LCD display on my Canon PowerShot SX10IS hasn't worked for some time. Today I hit the display button and it suddenly came on. When I hit the Display button again it went off and won't come on again.


It sounds like the ribbon connector to the dispIay might be loose, and needs to be reseated. You YouTube has some informative videos, but, basically, you have to take the back cover off to do this, which involves taking about 5 or 6 small screws o ... Canon PowerShot SX10 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2402 seconds