Having problems with your Canon PowerShot S70 Digital Camera ?

The rocker switch to zoom the lens does not work on S70

\015 Seems to work to zoom out but not to zoom in the image. instructions to order the rocker switch and how to replace it would be most appreciated.\302\240\011\011\015

Answers :

Repair Help & Product Troubleshooting for Canon PowerShot S70 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The rocker switch to zoom the lens does not work on S70

... Canon PowerShot S70 Digital Camera

About seven days ago bought shelf display Fujifilm S1000. Worked fine at the store. Got home, read instructions, powered up, lens would not extend, "zoom error" displayed. Camera was room temp. When switched on, camera beeps, extend motor clicks, sounds like a gear engages for a split second. Took back to store next evening, it worked fine. Next try at home, same problem. Back to store, worked fine. Tried at home and at work, still "zoom error". Again to store, worked fine. Ready to return, stil

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S1000FD Digital Camera

Zoom error The lens extends to maximum and motor keeps running when camera switched on, then lens retracts to about an inch then the screen says Zoom Error, also the zoom control doesn't work then. and there is no picture. Pictures already stored in camera can still be seen. But it seems there is something wrong with the zoom setting.

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will ... Fuji FinePix S8000fd Digital Camera

My Ricoh R4 camera has its lens stuck in the fully extended position. After switch on, it makes motor noises for a while and then stops and switches itself off. Switching the camera on and off does not move the lens. Also, operating the zoom buttons does nothing. Having this great little camera working again would be fantastic!

Hi there,Make sure the camera is fully charged. Then try this: Turn off the camera and hold it on your right hand with the lens facing the ground. Then hit the camera's base on your left palm as you turn it on. You might want to do th ... Digital Cameras

The zoom switch of my Lumix dmc-tz1 is defect. The lens comes out when I switch on the camera. And then no function works. Where can I get such a zoom switch? Thanks. My e-mail adress is [email protected]

I found an adress where I can buy that switch.\015\012\015\012Thank you for your help.\015\012\015\012Best regards, \015\012Harrie van Schalen ... Panasonic Lumix DMC-TZ1 Digital Camera

I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac

I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras

Nikon Coolpix S4000. Lens error when attempting to use the zoom function. The camera works ok and the lens extends when you switch the camera on. Takes pictures ok as long as I don't zoom. Any fixes available?

HelloThank you for using FIXYA!!!This\015\012 is a suggestion. I ... Nikon Coolpix S4000 Digital Camera

My camera worked fine for 3 years, when suddenly .... when i'm zooming fast (zoom button pushed down) camera switches of. If i'm zooming slowly everything is ok. Some master said that zoom lens motor was demagnetized. Need change motor. Is it true and is it possible to buy this motor from you and what could be price? thank you.

I would say to check the batteries and their connecting surfaces plus the contacts in the battery compartment. With bad connections on the batteries, when the camera zooms slowly it does not use much power. When zooming fast it uses more power (curre ... Canon PowerShot S3 IS Digital Camera

Has always worked fine, til just now. took a photo, went to put onto ebay and opened picture using windows picture and fax viewer. not happy with photo,switched off, removed camera from cradle (link to pc) and tried to take another photo, but when i switched the camera on i had an error message stating 'focus error' and when i tried to switch it off the zoom lens remained extended and will not go back into tne camera. I have read the manual and tried removing and replacing the battery, but this

For your information the computer has nothing to do with the focus error!!!!the error appears as a message due to either of these reasons.\015\012\015\012you have dropped down the cam.remember even a small drop may ca ... Fuji FinePix F410 Digital Camera

Panasonic DMC-TZ1 After switching on the camera Zoom will not work. i.e. stuck at wide angle. The screen says' remove lens cap and try again' After repeating that suggestion several times it will still not work. is this a warranty problem( I still have some left) or is it something I can fix?

I just had this problem, too. I basically disassembled the camera by removing the back cover, front cover, and top assembly. The top assembly includes a plastic part between a circuit board and the top external metal piece that houses the button on t ... Panasonic Lumix DMC-TZ1 Digital Camera

Hi, I have a Sony Cybershot 3MP camera. it has been working fine for just over a year. However, when i try to turn it on it says he battery is low and then switches off. Or it will work for about to minutes before blinking out without even closing the aperture and zoom lens. I have tried charging the existing batteries and i've bought new ones and madesure they a fully charged. I get the same problem... Can anyone help me, or can you tell me what's wrong with it???

Check the contacts and clean them if necessary. If that does not help, try a different BRAND of batteries and see if the issue persists. If it does, it could be a problem with the power board, which calls for servicing.. ... Digital Cameras

C-350 zoom, i open the lens cover to switch the camera on, the lens goes in and out 3 times whilst camera beeps and then shuts down, i have fully charged batteries and the picture veiwer works ok.

... Olympus Camedia C-350 Digital Camera

I have Olympus FE 340 8.0 mega pixel camera. Now, when I switch it on, in the camera mode, the lens opens and closes(zoom in and out) 3 times and getting switched off. In picture viewing mode it is working perfect. What could be the reason for this, Please help me in correcting this?

OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Olympus Digital Cameras

My nikon d40 wont take a photo with the standard lens unless I switch it to manual but when I put the telephoto lens on it works in both auto and manual. How do I get my standard lens to work in auto (the "a" switch on the lens)? It has worked in auto in the past.

Hi,\012\012Sorry to hear about your lens. If you are able to take pictures with a telephoto and any other AF-S lens, then it means that your problem lies with the standard lens. With standard, I assume you mean the kit lens. If you can take pi ... Nikon D40x Digital Camera

Brand new camera-switched it on- has a blank screen-its fully charged, its just got a lit blank screen and zoom lens only comes out slightly.,-im sending it back to where i bought it from but im concerned whether there is something i havent done to make it work. help. thanks so much

No...you have a brand new defective camera. Glad you're returning it. ... Digital Cameras

Lens error When I switch on my Exilim Z-500, the zoom extends only half way of what it used to and there's some cracking noise as if something was blocking it. The zoom is at maximum, i.e. when I zoom in further it goes to digital zoom. But when I try to zoom out, it gives me another cracking noise, a lens error message and switches off. I can't take any pictures because the zoom setting seems to be totally messed up. The image is all blurry - at any distance. I partly disassembled the camera a

The lenses are mounted to cylinders and the outside of the front cylinders have pins mounted to them. The pins ride in little tracks that move the front one in and out. The cylinders rorate with a motor and gears. You could have damaged gears or the ... Casio Exilim EX-S500 Digital Camera

I have a Canon XM3 camcorder. It has given me many years of good service. Recently it has developed a fault. When I switch it onto Camera mode, and then flip the switch to Standby, the small screen flickers blue for a short time, but it does not show the image from the lens. If I switch off, and sitch to Playback, the small screen works OK and all the Playback works fine. Sometimes when I switch to Camera, and Standby, the small screen flickers blue, and then an image from the lens appears, but

Its the problem of CCD assembly\015\012CCD (image sensor) failures, particularly in conditions of high heat and humidity, led to cameras capturing images with either no picture at all, or with extreme distortion and se ... Digital Cameras

My D70 (which I just bought on ebay) is having problems with AF. At time the AF works fine but then for no reason it refuses to work for hours to days. I have two bodies so I can swap lenses to see that its not the lens. If I switch to manual focus, it the camera works fine. I can see the little pins around the lens fitting retract when I switch the camera to manual. Seems like a problem with the internals that control AF. No other problems are apparent to me. Any suggestions?

Sounds like a contact issue - either they are not making consistently or they are just dirty. I'd start with a good contact cleaner (Radio Shack or photo store) and spray the snot out of both the camera contacts and lense (making VERY sure to protec ... Nikon D70s Digital Camera

Jammed lens My zoom lens is jammed, and when I switch on the camera the red light switches on but no picture appears on the screen. The zoom lenses remain as they are when the camera is both on or off. (they are jutting out as if the camera is switched on.) Can I repair my FE-210 and if yes how?

Would be best to send to repair center ... Olympus FE-210 Digital Camera

I have a canon EF 70-300 f/4.5-5.6 DO IS USM lens that has a zoom lock switch. When in the unlocked position and I try to zoom the lens it sticks at around the 200mm mark and cannot seem to move it below that positon, I need to wiggle the barrel before the zoom seems to "let go" and the lens goes to other positions. This is quite a problem as the lens cannot be operated in all its positions. Also when trying to get it unstuck, it feels like I am applying too much force and could further damage

Http://www.pasieka.com/static/simon/fixcam/\015\012\015\012click the link ... Digital Cameras

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?

Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

My kodac Z1285 stopped working and the whole lens is out, after i clicked the power it started ok then i zoomed in, after the lens is completely out ''maximum zoom'' it stoped working and never come back on. the batteries is fully charged, although i tried another fully charged batteries i was thinking just to go to the screws and open it to see what is happened but i don't know, what shall i do?!

Don't open it!! That will void any warrenty the camera has! Have you tried cleaning it with Denatured Alcohol? You can puchase it at any store with a hardware dept. Just soak a q-tip in the alcohol and swab the camera down. It's safe to use on the sc ... Kodak EASYSHARE Z1285 Digital Camera

Canon EOS Rebel XT with EFS 18-55mm lens. Trouble-free for two years. During a weekend of lots of use, suddenly the camera would not autofocus. Switching to manual focus, the camera worked. Then it started working okay in autofocus. Later that day quit altogether. (Would not release shutter even in manual mode.) Removed the lens and cleaned the contacts on both lens and camera, started working okay but only temporary. Went through several cycles of this over the weekend, so I'm not sure

... Canon Rebel XT / EOS 350D Digital Camera

My D80 was purchased in April 2008 along with the Nikkor 18-200mm VR zoom lens. The camera and lens worked flawlesly until this past week end. The cameral stopped focusing in auto mode with no warning. I did hear a whining noise when I tried a Tamron 11-18mm wide angle lens. The auto focus did not work with that lens either.

Make sure your AF-switch on your camera and your lens are both turned on. ... Nikon D80 Digital Camera with 18-135mm Lens

Good Day. I dropped my Nikon Coolpix L16 camera onto a table. Since then when i switch the device on the lens goes out about a quarter and the goes back in and i get a lens error message. I noticed that when the lens goes out it bends to the right(looking from the top) and gets stuck by something. When i pull the lens a little to the left while switching it on everything works fine. A very small metal part came out of the camera. Any ideas? is it repairable?

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2717 seconds