Having problems with your Canon PowerShot SD1000 Digital Camera ?

My canon powershot sd1000 camera is showing a black screen


Answers :

A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very bright and overexposed, sometimes with lines, especially when taken outdoors (for shutter stuck open). \015\012To confirm a stuck shutter, put the camera in any mode other than "Auto", and turn the flash OFF (you don't want to blind yourself for the next step). Next look down the lens and take a picture. You should see a tiny flicker in the center of the lens as the shutter opens and closes. If no movement is seen, then you likely have a stuck shutter. If so, please see this link for further info and a simple fix that may help.\015\012
Repair Help & Product Troubleshooting for Canon PowerShot SD1000 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five


Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera

Canon PowerShot A480 won't take photo. Pressing on button camera on then pressing silver button to take photo when pressed down screen turns black no picture taken. Batteries new. This is the story; camera was working fine then showed low battery bought new batteries took couple of photo's showed low battery again. Replaced battery same thing again but now when pressing button to take photo screen goes black. Camera bought 30/9/2009. Any idea's????


Its just a matter of batteries...some are not powerful enough to operate the camera ....Try to change them and buy some real good ones..like Duracell or Tatra...do not make any compromises when buy the batteries...get the best cause these kinda camer ... Canon Powershot A480 - Silver Digital Camera

My canon powershot sd1000 camera is showing a black screen


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very ... Canon PowerShot SD1000 Digital Camera

Canon powershot sd960 is digital camera 12.1 mega pixels. When you turn on the camera, you see the initial canon greeting, then the screen in black and when you take the picture it is black. When you review pictures from SD card, you see the rev images but the new ones do not show up but black.


Hi,\015\012\015\012This may well be an internal comonent failure or a problem with the SD card. However, to troubleshoot this issue, first remove both the SD card and the batteries altogether from the camera. Replace both, power up and se ... Canon PowerShot SD960 IS Digital Camera

My canon powershot S2 1S is showing me a black screen and taking black photos, the camera turns on and shows me it's tool bars but is black otherwise. Any idea how to fix it?


... Canon PowerShot S3 IS Digital Camera

When I turn on my Canon PowerShot S2 IS camera and set it to shoot mode, the screen is black. A while back, I was able to get the screen to show by toggling with the camera and constantly turning it on and off. Now, however, it is completely black and will refuse to work. How do I fix this problem? Thank you.


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very b ... Canon PowerShot S2 IS Digital Camera

Canon powershot SD780 is camera. Camera shows the canon screen then turns black and beeps three times then says "lens error restart camera". I don't know how to restart...i need to use it I'm on a trip What do I do?


There's really no way to restart it if there's a physical problem with the lens. Try to power it on again but if that doesn't reset it, the camera needs to be serviced. A great site for help with these is: camerasandparts.com They just specialize in ... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera

Powershot A560 I have a Canon Powershot A560 but now when I turn it on it beeps 6 times and the screen shows "canon" in blue but then goes black and says at the bottom "lens error, restart camera". Also, then lens never fully goes in or out. Help.


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot A560 Digital Camera

Canon powershot s1 is this camera shows a black screen all the time except when putting camera to display mode, when it will show previously taken pictures. I have tried changing batteries and memory cards. I have also tried taking a 15 second picture and removing and inserting batterise to no avail/ Any ideas?? ian


See this link. The details apply to US residents, but the service n ... Canon Digital Cameras

Hi i have a Canon Powershot A610. I have a loose wire, I think in the screen or the body of the camera, not sure what the problem is. Everytime I take a picture you cant see what you are taking a picture of because the screen is all black. So, when you go and look at what you have taken under the play button it shows a blank/black screen. I don't know what to do, please help me!


... Canon PowerShot A610 Digital Camera

My canon powershot a95 display screen does not show an image when I am trying to take a picture. The image that is displayed is black with white lines and varies in the amount of black and white. No matter what setting I turn to, I can not get the image to appear. It had been working fine till a couple of days ago. It has not been dropped. I get the same result when trying to view a picture of a card. Is there any way to reset the camera?


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera

I have a Canon powershot SD1000 that no longer will show the picture on the viewing screen. The screen is completely black


Hi!\015\012\015\012It's possible that you may have accidentally pressed the DISP button to disable the LCD. Please try to press the DISP button after you switch on the camera. If the display does not show up on the first press, tr ... Canon Digital Cameras

Black screen hi, i have a canon powershot A75 and when i turn the camera on i see the blue logo then its supose to be the picture screen but my picture screen is black n fuzzy i dunno y i thought maybe the settings were wrong but i dunno plz help me i need my camera for my brothers wedding help me fix this problem! remember black camera screen! thank you sue


Hi,\015\012Your Canon A75 camera has problem in CCD Imager and this part will be replaced to get back picture.\015\012Canon announced free of cost repair scheme for subject problem and you can see details by clicking ... Canon PowerShot A75 Digital Camera

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18


E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

My Canon powershot SD1000 screen isn't working. Iv'e charged the battery but when I turn the camera on, the screent is black. It won't take any pictures


It's very likely the CCD sensor that needs to be replaced. If you need to have it serviced, this place is excellent for the Powershots and not much at all if you need to have one fixed: ... Canon PowerShot SD1000 Digital Camera

Not taking pictures, screen is black - Canon PowerShot SD1000 Digital Camera


I had the same thing happen and by searching around for a solution today I came across is easy fix - give the camera a little "whack". It worked like a charm for me and several other people with the same issue. The issue was on this site but I can't ... Canon PowerShot SD1000 Digital Camera

I have a Canon Powershot Digital camera just over 1 year and we turned it on the screen is all black now(started out 1/2 black-it flashes but no picture is taken- all settings are as they have been since we bought this camera from BestBuy. This is the 2nd Canon Powershot we bought in the past 3 1/2 years & it will be the last one. Can you tell me what I can try to get this fixed? Thank you. Karen from NC


Test ... Canon PowerShot A85 Digital Camera

Canon powershot S200 digital camera. When taking pictures cannot see images. Only shows black or grey screen. Lense is open.


See this link. ... Digital Cameras

Canon rebel xsi dropped screen is black photos don't register on card camera functions seem to work...menu shows up buttons work lcd shows settings when camera is turned on but when I depress the shutter a screen comes up black with 1/60 10 100/1898 any suggestions? Thank you.


You may have to send that to a repair centre as dropping digital camera's often shake electronic parts out of place inside. you should try removing the digital card and reinstalling it to see if that helps at all. ... Canon EOS Rebel XSi Digital Camera

Hi there we own a Canon Powershot a75 Digital camera that used to take lovely pics but now once we take a picture shows up blank or black screen. When in the video setting you can here everything but again no pic - can you help.


Http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=27703Is the link to the recall page for a variety of Canon cameras being serviced for defective CCD sensor ... Canon PowerShot A75 Digital Camera

Canon SD1000 shows black screen when trying to take a picture


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very b ... Canon PowerShot SD1000 Digital Camera

Hi, I have a Canon IXUS 95IS camera.. For some reason, when I attempt to take a photo, the LCD screen isn't displaying what is actually in view? In movie mode it comes up on the screen but when i flick it to Auto or camera mode, the screen goes black and only shows the little icons... Weirdly enough, it still takes the picture but the really annoying thing is it doesn't show up on the screen what you're taking a photo of so it makes it really hard for the person taking the actually photo... can


Ah yes! you have pressed the display button. Turn the camera on and you see the icons in the display, look for the Disp button and press it, the display will cycle through its modes icons, black, image and icons. ... Digital Cameras

Blank black screen for my canon powershot S1 IS digital camera


This is a common problem with S1 IS and it is caused by faulty CCD sensor. Note that you can playback captured images without any problem but in capture mode all you get is blank screen.\015\012Will have to go to Canon but note that Canon repairs the ... Canon PowerShot S1 IS Digital Camera

Canon SD 550-- sensor problem? Bought 3/2006 and have had no problems. Suddenly, LED screen went black--shows nothing and cannot take a picture altho will flash and record black picture. Shooting options do appear on screen when in picture-taking mode. Can see pictures that were taken previously, however, while showing them on TV screen, camera shuts off. Is this an expensive repair. Thanks.


The shutter of the camera is not opening that is why every picture taken is recorded black. It is a mechanical problem and probably has nothing to do with the sensor. Not very expensive ... Canon Digital Cameras

Black Screen The camera was never dropped. And, it worked perfectly just 1/2 hour before the problem occurred. Turn it on, Canon logo shows up, then black screen with 2 beeping noises, the screen says E18 and the camera shuts off by itself. Please let me know what the problem is. I am very frustrated about this!!! Many thanks.


Cannon will repair it free of charge,its a problem with ixus 400. ... Canon PowerShot S400 / IXUS 400 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5306 seconds