Having problems with your Canon PowerShot SD1000 Digital Camera ?

Every time I switch on my Canon SD 1100 IS is asks me to set date and time. I set date and time and then it lets me take pictures. Next time I switch it on again it asks to set date and time. How could I get rid of this.


Answers :

The camera's clock battery has worn out. Unfortunately, on most Canon SD series, this battery is not user serviceable. Recommend contacting Canon to see if they'll replace it, hopefully at a reasonable cost. 1-800-OK-CANON
Repair Help & Product Troubleshooting for Canon PowerShot SD1000 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Every time I switch on my Canon SD 1100 IS is asks me to set date and time. I set date and time and then it lets me take pictures. Next time I switch it on again it asks to set date and time. How could I get rid of this.


The camera's clock battery has worn out. Unfortunately, on most Canon SD series, this battery is not user serviceable. Recommend contacting Canon to see if they'll replace it, hopefully at a reasonable cost. 1-800-OK-CANON ... Canon PowerShot SD1000 Digital Camera

I have a cannon power shot A580, about one month old and it keeps asking for the date and time everytime i switch it on, even though i have replaced the date battery and the camera batteries, and set the date and time in the menu time and time again!!! HELP


If you've replaced the date battery, then the camera is defective. Being only a month old, first recommend seeing if your retailer will exchange it. If not, Canon will fix for free under warranty. Call 1-800-OK-CANON. ... Digital Cameras

Every time I switch it on it asks me to reset the date and time settings. The batteries are fine and I don't recall changing any setting to make it do this.


On the left hand side of the camera there is a little batter hatch, above a screw hole. It has a number written on it. Pull this out and replace the battery in it. This is the time and date battery. ... Canon PowerShot SX100 IS Digital Camera

My D40 does not shut off properly, and sometimes turns on by itself. It seems to be getting worse, and sometimes I can only get it to turn off by putting the on/off switch in between the two settings. Also, sometimes if the camera gets left on I have trouble taking pictures the next time I go to use it (even if the battery is still charged).


Obviously something is wrong with the on-off switch. I would have it serviced. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

I am looking to buy a olympus m9010 camera. When you switch on the camera the date and time settings appear. If i don't set it, it will appear every time i switch the camera on. So i wanted to know if i set the date, time, year settings will that display when i transfer to my pc and when printing or it displays only on my camera LCD. i have this doubt because whatever is displayed in lcd will be the same when you transfer to PC. Hence please clarify. It will be better if you answer to the modeln


... Olympus Digital Cameras

I have sony DSCW170 and please tell me how to get the date & time stamp on photos. I could not find the settings. If it does not come as a feature, please tell me how to get it done manually or through photo editor software. thanks, SS


This camera doesn't have an superimpose option. However, you can transfer the pictures to the Computer, then insert the date and time on the pictures using the supplied Software(PMB) or you may also use paint. ... Sony Cyber-shot DSC-W170 Digital Camera

My HP photosmart R967 worked great until it said it was out of battery and shutting down. Now I can't get it to charge, and it won't turn on. Strange thing, when it's on its' little dock charger, it turns on to a screen asking you to set the date and time, then won't set it. My husband thinks it needs a new battery ---- help! I need my camera!


... Digital Cameras

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk


You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera

The date and time will not stay set. I set the date time . take pictures and when I shut the camera off. the next time I turn it on the date and time is zeros again...


The world of compact digital cameras is fast and furious blink and you'll miss the new model. These pocket point and shooters are cram packed full of features that most people neglect to utilize. So it's uncommon for the problem you describe to occur ... Canon PowerShot A710 IS Digital Camera

Canon pc1156 every time date set comes how to get rid of it


... Digital Cameras

How do I reset my panasonic lumix camera I need to reset camera to a new state. including getting rid of time and date settings?


... Canon PowerShot SD890 IS / IXUS 970 IS Digital Camera

How do you get back to the first switch on screen that asks you to set language and Date, i.e factory conditions


The language, date and time are found in the "setup" menu. ... Nikon COOLPIX L100 Digital Camera

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.


The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

I am trying to set date time in my camera(canon sx110is). But in every power on it is reseted. Whatever date i am setting in this camera is not stored in the memory. In every power on it asking for setting date and time. I need help in this regard.


You have to change the 'date battery'. Use the user manual to find its location.\015\012\015\012Mine is Canon A520, located beside the cable link sockets. Battery is CR 1220. ... Digital Cameras

Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.


... Canon PowerShot S400 / IXUS 400 Digital Camera

Every time I turn my camera off I have to reset the time and date when I turn it back on. When I first got this camera I could set the time and date and it would stay set until I changed the batteries. what is the problem and how do I fix it?


The small internal battery has died.It will need to be replaced at a camera repair center. ... Polaroid A500 Digital Camera

When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.


Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera

Joystick not working. The cam turns on and prompts for date and time to be set. The only thing I can get it to do id to move the curser up and down. I can't slect anything to continue to set the date & time. I opened the cam and found that I can replace the button if I can find a replacement. Thank you.


To reset the date connect Camera to PC. Open Easyshare Software, Go to Tools and Select SYNC. This will usually set the Camera Time/Date to the PC Time and Date. I have the same problem,(DX7630) cannot Move to the Right or use the Enter on Joy Stick ... Kodak EasyShare DX7630 Digital Camera

I need to know how to set time and date for pictures. then to be able to take the time and date off for next set of pictures.


You need to install the bundled software(Sony PMB) to be able to save the images with date. Once installed use the Easy export(PC Sync) and then choose import images-> then put a tick in the check box "import images with time and date". That shoul ... Sony Cybershot DSCW350 Digital Camera

Canon sd900 how do I get the time and date on my pics I know how to set the time and date but I cant figure out how to get it to come up when I print a picture


Ive encountered this question and someone posted that you can have the date and time stamp if you set the camera on auto mode, then post card 1600-1200 then set the time and date..try it and see if it works on printing too.. tell me it it works.. but ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I cant get my date and time on the pictures even after i have set the date and time . When i print or download on computer the date and time can not be seen


The date/time stamp only works in "Postcard" resolution. Press the "Func Set" button, then scroll down to the bottom to select postcard resolution. \015\012Then press the menu button. Select the "Camera" menu, then scroll down to the the Date T ... Canon PowerShot A430 Digital Camera

Good Morning I went hiking in broad daylight this past weekend and the autofocus would not work. I have a Canon 40D with a TAmron 18-270. I used av, tv, p, m and auto and I could not autofocus the camera. All I could do is to switch to manual focus to get it to work. When the lens was set to AF all you could is hear is it racking back and forth tying to focus. VERY FRUSTRATING.. Any ideas of what it may be or a setting I might have set accidentally. Any help is appreciated. Bob


Did you set a strange auto-focus point? ... Canon EOS 40D Digital Camera

Each time I switch my Casio Exilim ex-fc100 camera on, the set time and date menu appears and my previous setting are lost (like photo resolution, flash setting and so on) like it is re-set everything. This happens even if I do not remove the battery. Can you help me, please? Max [email protected]


... Casio EXILIM EX-FC100 Digital Camera

I have to set the date each time I turn on my Nikon S9 camera even when the battery is fully charged I have the Same Problem .. every time i turn ON the Camera .. it ask's me for the Date & Time .. that accoreded after my camera had a bad fall on the ground ?_?


... Canon PowerShot SX100 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3716 seconds