Having problems with your Canon PowerShot SD1000 Digital Camera ?

Lens error; restart camera Lens will not retract



Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous interiors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particles that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Canon PowerShot SD1000 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lens error, restart cameraI turn on my camera, and I get an error message stating Lens error, restart camera, the lens is open and will not retract, I have removed the battery and tried to restart. It will not go beyond the lens error message


This is probably THE most common problem with digital cameras. Try these procedures. ... Canon PowerShot SD850 IS Digital Camera

Lens error, restart cameraI turn on my camera, and I get an error message stating Lens error, restart camera, the lens is open and will not retract, I have removed the battery and tried to restart. It will not go beyond the lens error message


Try these procedures. ... Canon PowerShot SD850 IS Digital Camera

Lens error, restart camera telephoto lens is stuck in zoom position and won't retract, so when i turn on camera, screens says "lens error, restart camera", but it won't restart...just keep coming up with same error message


Hello mnickoliThis is a fairly common error especially with the A560.This either means that something is jamming the lens , or that the\015\012lens sensor is faulty. This is a very , if not the most common problem\015\012with modern digit ... Canon PowerShot A560 Digital Camera

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera


\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras

Lens error my canon IXUS 860 IS is having a lens error problem. firstly, the lens cant retract back and when i try to switch it on, the screen will say 'lens error, restart camera' so how do i restart the camera?? i'm currently overseas and although my camera is within warranty, i cant possibly send my camera back to the original country for repair. is there any DIY method?? i'm an amateur at cameras so i do not wish to try any method that may further make the problem worse. thank you for your h


This is probably THE single most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon IXUS V2 Digital Camera

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

My canon IXUS 860 IS is having a lens error problem. firstly, the lens cant retract back and when i try to switch it on, the screen will say 'lens error, restart camera' so how do i restart the camera??


Here are some troubleshooting steps for your lens error problem. And here's a video summary of those steps: ... Canon IXUS 860 IS Digital Camera

The lens will not retract. A message says "lens error, restart camera," but the camera will not restart. The camera is a Canon PowerShot S3 IS. I can hear a "whirring" or motor noise when I try to start it, but the lens will not retract and it will not take photos or allow you to review photos. Batteries are just fine. I imagine it's the gears, but I wish I could have it repaired for not a lot of money.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot S2 IS Digital Camera

I have a canon ixus 900Ti. I turned it on yesterday and the lens came out as normal. when i went to take a pic the camera shut off but the lense never retracted. when i turned the camera back on the splash screen came on, followed by a series of beeps and then and error message saying "lens error, restart camera". restarting has not solved the problem. its like the lens is stuck out. hope you can help Regards Liam


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Digital Cameras

Was shooting with Canon PowerShot S3 IS and the lens won't retract,screen says lens error,restart camera. I have restarted camera, changed batteries etc... still nothing. You can hear a clicking sound like something should be happening, but it won't retract.


According to what you were doing there is a possiblity that its jus sand or someting that got caught in the lens. please take it to the neariest repair shop to get it cleaned/ checked. ... Canon PowerShot S3 IS Digital Camera

I'm getting error message that says "lens error restart camera. the lens won't retract and restarting the camera doesn't do anything. Help!!


Thats a well known problem wiith that model .. here is a site that explains the failure and gives solutions .. \015\012http://www.e18error.com/ ... Canon PowerShot A480 Digital Camera

My canon camera Ixus 8515 has an error when turning on (after some 'stuck' noises) that reads 'lens error, restart camera'. The lens is not retracting. The camera has not been dropped. Was working fine one minute, then camera appeared out of focus the next. When I turned camera off then on again, error appeared. Lens won't go back in. Have not tried forcing it as yet.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

Camera felled to floor lens tries but cannot retract camera turns on and off fine, error message "lens error, restart camera" it appears that until lens can function properly and error message is resolved camera is inoperable.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A630 Digital Camera

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks.


Try the procedures in this tip. ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Lens error when i turn off my camera, the lens fails to retract and i get a screen that says, lens error, restart camera. Can anyone explain this. When i try to turn cmera off/on the lens remains extended. It does take pictures.


On Fathers Day, 2006, I received a Canon PowerShot SD700 IS, and it has served me well. Just before Father's Day, 2012, my young son dropped my precious PowerShot on its lens onto a wood floor, causing the smallest ring at the end of the lens assemb ... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

Lens Retraction I've had my PowerShot for seven months and yesterday, after taking a picture, my friend turned the camera off and the lens structure did not retract nor did the cover go over the lens. When I turn it on now, it says "Lens error. Restart camera." but it won't seem to fix itself. What should I do?


Since your camera should be still under warranty, best thing will be to conntact to the appropriate factory service center for correction of the problem.\015\012\015\012Good luck! ... Canon PowerShot SD600 Digital Camera

Lens will not retract. reading "lens error - restart"


The lens motor is burnt out. Has to be replaced. ... Canon PowerShot SD870 IS Digital Camera

Lens Error I keep gettin lens error restart camera on my canon powershot sx100 and the lens wont retract. I have turned it on and off several times now. Is there anything i can do to get it working again?


Unfortunately this Canon SX100 (and the SX110 too) has a very fragile lens assembly. Once you have this lens error problem, there are only four solutions: 1) If it's under warranty, contact Canon to make it valid; 2) If not, then have a repair center ... Canon PowerShot SX100 IS Digital Camera

The first issue with my A1100 was that the lens would not retract fully when I turned it off. Then trying to "fiddle" with it the lens would not retract at all and I could not use the zoom with out the camera turning off and the note in the window states "lens error restart camera".I was however able to download a picture I took. Phil


This is a physical damage caused by a something being caught between the lens and the main body ...but I would not advice you to open it ..cause you may do more damage than good..try to see if there is anything in the way and visible ..and if after s ... Canon PowerShot A1100 IS Digital Camera

Hello I have a Canon digital elph sd600 and the lens won't retract all the way and it gives me a lens error message to restart the camera but the lens is stuck halfway - it won't extend fully and it won't completely retract. Any suggestions as to what I need to do to fix this? Thanks so much I appreciate it.


See http://www.fixya.com/support/r13011856-lens_error ... Canon PowerShot SD600 Digital Camera

Lens error my lens won't retract and i get a lens error restart camera message.  and it shuts off after a few seconds. please help


HiWhat you are seeing is a generic message that means there is\015\012some sort of problem with the lens, it could happen in many different\015\012ways such as sand or dirt in the lens gears.A couple solutions would be to eith ... Canon PowerShot SD600 Digital Camera

Lens error Camera just gave message "Lens Error. Restart camera". Lens won't retract.


It's about $124 repair charge if your camera is out of warranty. However, when I called customer service, he said to be sure the batteries are not getting old or running a little down, because besides that, the issue is something that will need repa ... Canon PowerShot S3 IS Digital Camera

Lens error When I turn my camera on the lens retracts and the display reads lens error, restart camera.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A570 IS Digital Camera

Lens error lens won't retract and i get a lens error restart camera message and it shuts off about 6 seconds after.  i've tried holding the button down and twisting, it didn't work.  please help


HiWhat you are seeing is a generic message that means there is\015\012some sort of problem with the lens, it could happen in many different\015\012ways such as sand or dirt in the lens gears.A couple solutions would be to eith ... Canon PowerShot SD600 Digital Camera

My 2 year old son dropped the my husband's Canon G11 twice while it was open with the lens out. Now the lens won't retract or the shutter close. It gives me a 'lens error, restart camera' message and won't restart. I tried taking out the battery for a few minutes and replacing it and reopening the camera, but to no avail. I'm afraid of taking it to someone and having it opened as I know that the chances of damaging it that way are bigger. Please provide me with your soonest reply. Rania


Hi Rania. If you go with a place that knows what they're doing, the camera will be perfect again, sometimes even better as they'll service it all up at the same time. A site that a lot of people go to for help with the Canon Powershots is: ... Canon PowerShot G11 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2260 seconds