Having problems with your Canon PowerShot SD100 / IXUS II Digital Camera ?

PowerShot SD100 turns on but no functions work


\015 My SD100 powers on and the lens extends and contract but nothing happens when I depress any of the function buttons. It displays some icons on the screen but I can't change anything or take pictures. It was working fine and then suddenly stopped.\015

Answers :

Repair Help & Product Troubleshooting for Canon PowerShot SD100 / IXUS II Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

PowerShot SD100 turns on but no functions work


... Canon PowerShot SD100 / IXUS II Digital Camera

Canon PowerShot SD1000 - Camera turns on, shoots fixtures, flash works, screen is on, but...none of the buttons or functions on the back work, nor does the zoom. Any ideas?


This sounds like an actual internal electrical connection problem. or a problem with the board itself. If the camera is under a year old I would have it serviced under the manufacturer warranty. If its over a year you can still have it serviced throu ... Canon PowerShot SD1000 Digital Camera

My Canon PowerShot SD750 (digital elph), when I turn it on, it reads "Memory card error" at the top. It shows a picture in the viewfinder, and all other functions seem to work but it will not take a photo. Do you know what I need to do to fix it? (The memory card is IN the slot correctly and the battery is charged)


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Digital Cameras

Without warning, my Canon PowerShot A530 ceased to function correctly. I turned it on, and it automatically zoomed all the way in. I can now only take pictures like that, and none of the buttons except the on/off and the mode dial work. It was never dropped or exposed to any rough elements, so I'm at a loss as to what could've caused it. Any suggestions?


... Canon PowerShot A530 Digital Camera

Canon Powershot SX110 IS Digital camera function button stopped working!


... Canon Powershot SX110 IS Digital Camera 9.0MP

Arcsoft webcam companion 3 photo capture keeps turning itself on when I am trying to use monitor function. It has worked fine in the past (I use it everyday when I leave the house) until I unplugged the camera overnight. This also happens when I switch user accounts. The capture function just turns ifself on and takes pictures, even when I close the program. It will turn itself back on and do the same.


... Digital Cameras

My Canon Powershot A460 shows Card Locked. The card switch is in the unlocked position. I have another camera. the card works in it. But the card from that camera also shows as Locked in the A460. I have tried the turn camera off and remove card, then turn camera on, then turn camera off and insert card. Both cards still shows Card Locked in the A460 and both work in the other camera


There is a lock lever inside the card slot. You could try to move it with something like a toothpick. ... Digital Cameras

My Camera will not turn on I have a Canon PowerShot SD750 Digital Elph. About 2 weeks ago, it stopped working and just randomly would not turn on. The strange part is, I had just used it about an hour before it stopped working and it seemed to be just fine. I didn't drop it or damage it in any way, so I don't understand why it just stopped turning on just out of the blue.


Hi emery,I guess the batteries are drained out in the camera.So just take out the memory card if u r using any.....and then try replacing the batteries.Turn ON the camera only with the batteries in.Check if its working fine.....If yes then use a diff ... Canon PowerShot SD750 / IXUS 75 Digital Camera

One Powershot s60 flash does not work - all other functions ok -- lens assembly does make a bit of noise (sounds like gears) when extending compared to new or factory refurb unit Second Powershot s60 lcd screen will illuminate white but no image - otherwise all functions ok - will take pics and can extract pics from sd card - lens assembly makes same noise as above --


Hi\015\012\015\012On the first powershot you need to make sure the Auto Flash is not turned off (button top left on rear of camera) If it has been turned off a lightening strike symbol contained in a circle will show on screen and ... Canon PowerShot S60 Digital Camera

I have a canon camara powershot A590 Is and the following functions do not work: 1. it will not zoom 2. the menu button will not activate 3. you can not review the pictures taken 4.none of the functions work the only thing you can do is take the pictures


Is this a new camera? If yes then you can avail the warranty by bringing it to an authorized service center to save repair cost. If its out of warranty, then for the zoom problem, make sure you installed fresh/new batteries. If the problem is still ... Digital Cameras

Canon Powershot SD450 got wet, would not work for a month, works great now but won't turn off. turns on by itself when you put the battery in.


Hi - just managed to get mine working again after adventure in washing machine 6 months ago! I was previously at the same point i.e. not possible to turn camera off. I have just removed all ribbons from front pcb as well as the connection from the co ... Canon Powershot SD450 / IXUS 55 Digital Camera

I have an Olympus E-10 and it will not turn on with battery power, however it turns on and all functions work properly on AC power, I really need help as this camera is in mint condition in appearance and function except for tih one problem...


... Olympus Camedia E-10 Digital Camera

My Canon 40D locks up when I click the shutter and the blue printer light next to the menu button is flashing. All the LCDs go blank and all functions stop working . Originally I was using a vertical grip and it still would not come on when I took the batteries out but after I detached the grip the camera did come back on . Now I'm not useing the grip and I still have take out the batteries and re-insert and turn back on camera to make function work again. Everything looks normal but the same th


... Canon EOS 40D Digital Camera

AF TROUBLESHOOTING SUDDENLY WITH NO WARNING THE AF STOPED FUNCTIONING AND THE ASSISTANCE BEEM IS OUT OF ORDER. I HAVE AN EOS 350D RECENTLY PURCHASED. I AM USING RESPECTIVELY SIGMA AND CANON USM LENS. TODAY AND AFTER FILLING THE BATTERY AND INSERTING THEM IN THE GRIP I TURNED ON MY CAMERA AND FOR NO APPARENT REASON EVERYTHING IS WORKING EXCEPT FOR THE AF. IF I TURN IT TO MANUEL THE CAMERA WILL FUNCTION PERFECTLY. I CLEARED THE SETTING AND RETURNED TO THE ORIGINAL STATUS BUT NO RESULT. I TRI


The secondary small mirror that guides the light from the lens to the sensors ( sensors sit at the bottom of the mirror box , underneeth the main mirror ) may be out of position. To check : take lens off and gently lift the main mirror half way up ( ... Canon Rebel XT / EOS 350D Digital Camera

Powershot Sd750 seems to be stuck in the custom mode, it turns on and off, screen works, but none of the buttons work so I can not take pictures or change the settings. This happened before and I recharged the battery and it worked just fine.. this time it's not working.. please help?


... Canon PowerShot SD750 / IXUS 75 Digital Camera

Negative effect. I've had my Canon Powershot S3 1S for over a year now. The other day I was taking pictures and it was working fine. I turn it off and set it down. I come back later, turn it on again and the screen shows has white lines that keep flicking over it. I turn it off and take the batteries out. Later I put the batteries back in, turn it on, and find that it is in negative effect. I'm pretty sure that my camera can't do this naturally and I've tried everything to see if I could get it


Have you tried resetting it to factory settings. if no please do it.(refer manual)but if yes please contact us again ... Canon PowerShot S3 IS Digital Camera

My canon powershot a1000 when turned on, displays a black screen with icons. its not like this before. normaly when i turn it on, i can see the view from the lcd but now no more. but everything seems to work as normal except for the black screen after turning it on. my trick is to press DISP in order for me to see the lcd display.pls help. thanks


... Canon Powershot A1000IS Digital Camera

Fuji S9500 Finepix S9500 Camera now (Oct 2012) almost 6 years old. Once or twice has ahd a problem when turning on to take pics (balck screen only) and ahs then recovered when turned on again. But now has stayed with balck screen and onlya limited single blep when turning on. View function still working and settings available, but just black screen when trning on to take photos. Any ideas to fix it? How much migth ti cost to send in to Fuji Srevice? Is 6 years as much as I shoudl expect fr


... Fuji FinePix S9500 Zoom Digital Camera

Hello, I have a Canon powershot SX100 IS, and everytime i turn it on it beeps and says on the screen "lens error, restart camera". I have tried tapping it, shaking it a bit. turning on and off. Put in new batteries, taking memory card in and out. Turning it on at different angles. Connecting to the computer. But nothing is working, it wont even let me look at the photos when i press the play button, and that doesnt even require opening the lens! please help! thankyou.


Try these procedures. ... Canon PowerShot SX100 IS Digital Camera

When i take a picture it works fine..but then i try and take another picture and it appears the whole functions of the camera is locked up..cant do anything..however the screen still shows a image.. to take another picture i need to turn off and turn on the camera again and then it will only allow me to take one picture then i have to turn it off and on again.. please help with this problem...im sure its something simple but it is very frustrating thank you


Firstable go on to your camera settings try looking around for the problem if this does not work get it repaired hope you have warrenty if you don't itll be a little expensive so goodluck:) and please rate this solution...\015\012But if this do ... Digital Cameras

My panasonic lumix dmc-lz7 camera is not functioning. It turns on the zoom goes in and out and then displays the message "please turn camera off and on again" after doing this the zoom stays out. Turning it on and off again does not get it to work. Jessica


Battery might be weak and needs a replacement or there is improper shutting down. ... Panasonic Lumix DMC-LZ7 Digital Camera

Our canon powershot a470, since we bought it has got confused between camera function and playback function. But it still worked. Now whatever function it is selected on, it will only let us record film and not take any pictures.


Go into the menu and find "reset"...follow the on-screen instructions. ... Canon PowerShot A470 Digital Camera

I have a canon powershot A470 and it fell in water. after i removed the card and batteries of which still worked and neither were wet, i let the camera dry for a couple of days. it has turned on since and the screen would come on and show me the pics on the card but it kept turning itself off and the zoom lense would go in and out on it's own. now, i can't get the camera to turn on and the zoom lense it stuck. any ideas??? or should i call it a wash. i really love this camera!!! Theresa


I submerged my powershot for a couple of seconds. it did get completely wet. it was acting very strangely: the lcd wasn't working, the little orange light on the front kept flashing, and it took a few tries for the lens to extend.then ... Canon PowerShot A470 Digital Camera

Heya i have a cannon powershot a480 and i got it near christmas time and when i turn it on it says "Lens error, restart camera" and i keep trying but it doesnt work, I took it to the beach the othe day and i think it may have a tiny bit of sand inside it but it work for a few minuits after it got sand in then stopped working Please could you help me? Thankyou <3


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “le ... Digital Cameras

Re: PowerShot SD100. Camera turns on OK, but


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot SD100 / IXUS II Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2427 seconds