Having problems with your Canon PowerShot SD1100 IS Digital Camera ?
USB trouble with SD1100is
\015 I connect the usb to the camera after it's plugged into the computer, however nothing is happening. I went to the device manager to scan the drives for my device but my computer reported:\015\012\015\012Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)\015\012\015\012What does this mean? Is it fixable? What can I do?\015
Code 19 \015\012Your registry may be bad. (Code 19) \015\012To check your registry, click Check Registry. If the registry is bad, Windows will restart your system and go back to a previous registry that is good. \015\012Solution button: Check Registry \015\012This code means that the registry returned an unknown result. \015\012To resolve this issue, follow the recommended solution, which will run Scanreg.exe. If this does not resolve the issue, type "scanreg /restore" (without quotation marks) from a command prompt. Finally, remove the device from Device Manager, and then redetect it using the Add New Hardware tool in Control Panel. \015\012Hope this help's ;)
Repair Help & Product Troubleshooting for Canon PowerShot SD1100 IS Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
USB trouble with SD1100is
Code 19 \015\012Your registry may be bad. (Code 19) \015\012To check your registry, click Check Registry. If the registry is bad, Windows will restart your system and go back to a previous registry that is good. \015\012Solution button: Check Registr ... Canon PowerShot SD1100 IS Digital Camera
I am trying to find the schematics for the main board for my Panasonic Lumix tz-5 camera. When I try to turn it on it says that it is "Connecting to USB" even though it is not connected. I have taken it apart a couple times to see if there is any corrosion on the usb connection or on the chip that the usb connects to. If I had a schematic of the main board I could possibly follow the circuitry and trouble shot it. If I could find the replacement boards and they were cheap enough I could also rep
Go into the camera menu and find "reset"...follow the on-screen instructions.(although since you've taken the camera apart a couple of times, I'm not sure anything will work as a fix). Also, remove the card and battery...press all the buttons...leave ... Panasonic Lumix DMC-TZ50 Digital Camera
My fujifilm finepix will not now download photos onto my computer. When inserting the usb port and turning the camera on the camera screen states ''usb'' and lit up in green it says ''pc camera''. I have had no trouble with this before after using it for a few years.
Maybe your computer is virus infected. Better to download your pix using card reader. This will also make your camera safe from virus from your computer. ... Fuji FinePix S7000 Digital Camera
Trouble Connecting I went to upload my pictures onto my MacBook and the camera won't connect. It had been working fine before and I hadn't changed anything. I tried taking out batteries and memory card, switching USB ports, and making sure the camera was set on USB and not the disk setting. What else can I try?I feel like I had this problem before and maybe it had something to do with Rosetta on Macs...could that be it? But I don't know how/where/what to do for that.Thank you,Tia
Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... HP Photosmart M425 Digital Camera
I have a Samsung PL100 (Dualview). I'm having trouble uploading my photos to my computer using the USB. I have installed the CD that came with the camera (InteliStudio) and when I connect the camera and computer with the USB cord, the red indicator light lights up. However, nothing else happens. The User's Manual says that it should automatically connect and the computer should be able to recognize it. It doesn't. I have tried different settings in the Menu and still nothing happens. Please help
I find that alot of times using the camera to unload your pictures to your computer is more trouble them you need to worry about. i say you just pull out the SD or SDHC card and plug that into you computer. if you dont have an SD or SDHC card reader ... Samsung DualView TL205 / PL100 Digital Camera
USB connections on digital camera cause trouble
Hello. you may be involved in a recall. please read this http://www.nikonusa.com/Service-And-Support/Service-Adv ... Nikon COOLPIX L18 Digital Camera
Kodak easyshare m381 trouble transfering pictures to t.v, says usb cable not supported
Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Kodak Easyshare M381 Digital Camera
Im having trouble uploading pics from my Olympus E-20p using the usb connection.
Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Olympus Camedia E-20N Digital Camera
I have a konica Monota model DG-5D camera and the USB port is not recognized when I connect it to my PC. I am attempting to down load my pictures to computer and the massage reported from the PC is devices is not recognized. PC drivers are up to date. I need your help with trouble shooting problem.
I could not find a Konica Minolta Model DG-5D camera listed on the support web pages.\015\012\015\012I did find a "DYNAX5D/Maxxum5D" that had ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera
My Olympus FE-370 has a broken screen, my fault. I bought a replacement off ebay for really cheap and it seems like it would work fine, but I'm having trouble taking the camera apart..A few of the screws, three around the screw-in tripod holder in the base of the camera, two on the right hand side close to the lens, and one right under the USB port, refuse to come out! If someone could help me with just that part, I would probably be able to figure out the rest! Thank you!
Sophisticated digital cameras are not consumer repairable! Unless you're willing to accept the fact that when you're done, the camera will take pictures as well as a banana, send it in for service. ... Digital Cameras
Error message Can u please arrange pics to do it with a diagram. I am having trouble with my finepix Z20fd camera. My pics will not download to my computer. My usb cable is connected and the message i get on my camera is communication error. Please help.
Use a separate card reader to download your pictures. ... Fuji Finepix Z20fd Digital Camera
I have an older Digital Concets 6.1 Megapixel with 4X Zoom USB High Speed and I am having trouble trying to erase the pictures stored on the memory card can you help?
Easiest way to erase all the pics at once is to format the card in the camera. ... Digital Cameras
Transferring pics OK, This EasyShare isnt so EASY! I've never had trouble downloading pics from a camera to a computer, until now. I've installed the software, plugged the USB cord in....it will ask me if i want to transfer ALL pic, select and transfer...etc...however it shows no pic found? HELP??
Have you taken new pictures with the device, or are these already possibly transferred to your system/PC? If they are already on your PC, it will not add them again (to save you space).If you chose transfer all, what do you get as a result? Che ... Kodak EasyShare One Digital Camera
I try to access the camera thru the desk top short cut..when I click the camera icon it looks for the photos...then a message.."computer cannot locate camera"...I have completed trouble shooting the usb port & device...the system says both are connect & operating. Is there a way to access the camera thru the command line?
Your best bet would be to unistall the camera and reinstall it.ONLY DO THIS IF YOU HAVE THE SOFTWARE TO REINSTALL the camera or it is a plug and playright click on my computer go to the hardware tab, then device manager. ... Digital Cameras
When transfering photos, an error indicates that the USB has malfunctioned. Trouble shooting indicates that drivers are not installed. Have been able to transfer photos in the past without problem.
Hi, Please the driver here : www.tomshardware.com > Forum > Windows 7 > Drivers ... Kodak EasyShare V530 Digital Camera
I have the fuji finepix J10 and am having trouble uploading pictures to pc. i have unistalled and reinstalled finepix software and checked usb and makes no difference. finepix screen loads and then errors or when i leave it and microfot scanner/camera wizard comes up it says camera is in use elsewhere?? any suggestions how to upload my pictures?? had a fuji camera before and had no problems.
Take out the Camera software.Then restart the computerLet Windows do it all by its self ... Fuji Digital Cameras
Havinging trouble connecting the usb cable connection to download pictures, cannot find the 'all images ' selection on camera. Has worked before but won't now recognize the transfer. can you help
Start using a card reader to download your pics. ... Canon IXUS 860 IS Digital Camera
I am having trouble uploading my pics from my camera. I have installed the software. I have used the USB cord to upload. I have inserted the memory card into my computer. I made sure my photos were on the memory card in the camera, and I still can't get the photos to upload. Any ideas on why this is going on? I have tried on my Mac and my PC.
Use a separate card reader to download your pictures to a folder you create on your desktop. ... Digital Cameras
I am having trouble getting my Nikon D40 to find the computer through the USB port. When I plug it in it says it is installing new hardware but then it says it cant find the software.
You should go through this doc:\015\012http://support.nikontech.com/app/answers/detail ... Nikon D40 Digital Camera with G-II 18-55mm Lens
Can I upload photos through the USB cord? If so, I am having trouble getting the computer to recognize that the camera is connected. What do I do!?
Use the alternative. Obtain a card reader and insert it into the reader which in turn is connected to the USB port Generally the USB should be recognised, but there is quite often this problem due to different levels of USB ( 1 and 2) ... Kodak EASYSHARE M1063 Digital Camera
When I connect my usb cord to the computer it does not recognize the camera at all! I tried usung a different cord because I have two of these cameras it still does not work., Same thing it is not recognized by the computer. I have used this many many times before without trouble.
Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connecte ... Vivitar ViviCam 3915 Digital Camera
Having trouble downloading my pics to my laptop via usb port and inserting sd card straight to lap top. it worked yesterday but now it wont give me a prompt to download
Open downoad software before connecting to card or camera. ... Digital Cameras
I have been able to download my photos of my camera now for 2-3yrs and suddenly I am having trouble even connecting with my usb cable, I found it so easy before, whats happened?
Windows update has made changes to your computer's registry and now, your camera is not recognized. Time to start using a card reader.\012 ... Nikon COOLPIX L18 Digital Camera
I have a PSP-3002, it's not charging with its charger adaptor nor the usb cable. Whats another trouble shooting idea I can use?
... Digital Cameras
I am having trouble downloading my pictures to my computer. I have the correct usb cable and everything. Help!
Can u advise , the operating system that you are using , have u installed the driver for the camera , some require this first before u connect the equipment ........ ... Polaroid I1037 Digital Camera