Having problems with your Canon PowerShot SD1100 IS Digital Camera ?

I get a blackout screen when i switch to picture mode and then I can only take pictures when camera is set on vivid color mode in portrait setting. I've had this camera for a year and this is the first time that this has happened to me. The video mode works fine, however

Answers :

Repair Help & Product Troubleshooting for Canon PowerShot SD1100 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I get a blackout screen when i switch to picture mode and then I can only take pictures when camera is set on vivid color mode in portrait setting. I've had this camera for a year and this is the first time that this has happened to me. The video mode works fine, however

... Canon PowerShot SD1100 IS Digital Camera

I have a Nikon D80... a year old. The following functions/buttons stopped working for no apparent reason in the same time frame. - holding the delete and metering mode buttons together to format memory card. (however the buttons independently work fine) - holding the WB button (set to PRE) to set preset white balance. - when camera is on... turning the power switch to the "bulb" symbol to illuminate the control panel on top of camera not working. thank you for any help you can off

You have the latest firmware installed already and you said you updated again just to be sure.Certain button combinations that used to work don't and the buttons work independently.Sounds to me like the BIOS chip itself is cor ... Nikon D80 Digital Camera with 18-135mm Lens

I have a Bushnell Trail Sentry Model 119320C and I leave it out for about a week at a time, I bought the camera new last year and used it last year and it worked fine, I put it put this year and it worked fine the first week it was out, now every time I go to check for pics, the camera is off, I put new batteries in it thinking that the batteries are not good and it still did the same thing, the camera is off when I check it, its saying that it has like 2000 events taken and only like 3-10 pictu

... Digital Cameras

Olympus SP-550 UZ won't focus properly most of the time. Focus point should be infinity since my subjects are seascapes, sunsets and clouds. I've tried all 3 AF focus modes but none work consistently. I can get it to focus sometimes if point the camera at the ocean first. I've even tried manual focus but it won't focus to infinity. This camera is practically new, has never been dropped. Is this a known problem with this camera? Is it a settings problem (I've reset the camera to factory settings

... Olympus SP-550 UZ Digital Camera

This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.

You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera

My Canon EOS Rebel XS digital camera has suddenly stopped taking pictures. It will not focus even though it is on the auto focus setting. The first set of numbers are flashing and there is a flashing dot behind the ISO 800. It was working fine when I used it one time and then the next time it wouldn't. I can view pictures, but cannot take them on any setting except A-DEP and it's not focused even then. Please Help!

Try cleaning the contacts on the camera body and the lens where they meet with a cotton swab lightly dampened with rubbing alcohol. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.

Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras

My camera will not charge. It was purchased just short of a year ago, so here is no reason for the battery to be broken. It will not charge at all when the memory card is inserted and when it is, the charging light links four times and then stops. I last used my camera about 2 months ago and it worked fine. The battery died during the last use and I am trying to charge it for the first time since.

Hi,\015\012It almost sounds like the battery won't hold a charge anymore which means you need a new battery. Since the camera isn't quite a year old yet I'd suggest contacting Nikon and seeing if they'll do anything for you before you buy a new batte ... Nikon Coolpix S4000 Digital Camera

Nikon Coolpix L14 digital camera was dropped recently. Since then, when flash mode is set to AUTO, shutter-release button must be pressed several times to take a picture. If flash mode is OFF, shutter-release button takes a picture the first time pressed.

There is some misalignment within the camera that occurred while it fell. The possibility can be the trigger to the flash which was set off , there can be a crack on the electronic board, a possible switch issue of the flash trigger or a ... Digital Cameras

I have the same camera at one year old and I have the same problem. Brand new batteries and the setting on the camera were right. I don't use it daily but the last time I used it it worked fine. Christmas day and it beeps three time but wont switch on. Surprise surprise the warenty ran out last week.

Http://www.youtube.com/watch?v=TmOPab5E4bw \015\012\015\012WATCH MY VIDEO THIS MAY HELP ... Gateway DC-M40 Digital Camera

No pictures I have a Moultrie DGS-200 camera (about two years now) and have used it only twice. The first time I got no pictures although it said there were 5. The second time was last weekend where it said 12 pictures yet there were none. When I first set it up at home it would trip from 20-25 feet away. Now I can wave my hand in front of it and it may or may not trip. What am I doing wrong.

Are you using a SD card or using the internal memory? The trigger mechanism on these cameras are not the best. They are slow and sometimes wouldn't go off with an elaphant standing in front of it and other times it trips from the wind, shadow, or a ... Moultrie MFH-DGS-200 Digital Camera

Date/Time stamp shows on pics fine but when I connect to pc with usb they all default to 1/1/2000. When I connect the usb cable into my camera the screen display reads "setup date/time usb connected" but at this point the setup buttons are frozen in both set up mode and playback mode. I want the pictures to transfer to the pc with the valid date that they were transferred on. Each time that I clear the internal memory or the memory card the camera starts naming the new pics with the same name as

... Moultrie GameSpy 4.0 Digital Camera Deluxe

Hi, I own a Sony Cybershot camera, and it has been giving a few problems as of this week. The lens keep re-adjusting in and out when I turn the camera on to take pictures. It however responds just fine when in picture-view mode. There is a screen prompt that says 'Access' when the camera is turned on, as well as the message 'turn off camera and start again'. I do not think that the camera had fallen at any time, and it is just under a year old. Thanks a lot for your response, Sarah.

... Digital Cameras

I got my camera around January 2008 but I haven't gotten to use it for around a year and a half. This is the first time I can try to fix it due to costs and other problems. I think the camera is having CCD problems because I can't take pictures without them being black but I can see previous pictures just fine. I've heard that repairs for this sort of thing are expensive especially once the camera is out of warranty- with luck, mine happens to be out of warranty. How can I fix this? And if I wer

Once a camera is two years old it is almost certainly going to be more economic to replace it (with a better spec) than to pay for a repair. It is human nature to resist throwing away something that cost so much, but it is less expensive to let go an ... Kodak EASYSHARE Z1485 IS Digital Camera

MEMORY CARD ERROR PLEASE CHECK THE CARD A complete picture taking lockout save for internal memory which functions just fine. There is the same problem on 3 existing and two new 2Gb SD cards from SanDisk. The internal connectors in the card slot are all in position. We have cleaned the card connectors and tried two different and fully charged batteries We do not have access to an AC adapter. We have had the camera for 'years' and this is the first problem - is the camera 'totalled'. Time for a

HelloI am glad to hear that we could be of help. Thanks for using Fixya, and be sure to come back again.Kind regardsLock123 ... Panasonic Lumix DMC-TZ3 Digital Camera

I have had a nikon D60 for the last 3 years.I normally use the auto setting and for the first 2 years it took beautiful photos almost every time. in the last year or so when i try to take a photo it often displays iso auto r 09 in the bottom right hand corner and won't take the photo and this doesn't appear to depend on lighting. Is there something i can do differently? Should i take the camera for a service? Thanks

Hi,You should review your camera manual. Here's a link to it.First, the "Auto ISO" message is simply informing you th ... Nikon D60 Digital Camera

My camera will also show pics that I have already taken so I know the screen is still good but won't go into camera mode. I changed the batteries, even the card and still have the problem. I have been using fuji s5600 for three years now and it's the first time i encountered such problem

If it won't go into camera mode then maybe the micro switch underneath the swtich is damaged. It's on a small pcb with 2 micro switches for either of the 2 functions. play back and camera ... Fuji FinePix S5200 / S5600 Digital Camera

I have a Canon XM3 camcorder. It has given me many years of good service. Recently it has developed a fault. When I switch it onto Camera mode, and then flip the switch to Standby, the small screen flickers blue for a short time, but it does not show the image from the lens. If I switch off, and sitch to Playback, the small screen works OK and all the Playback works fine. Sometimes when I switch to Camera, and Standby, the small screen flickers blue, and then an image from the lens appears, but

Its the problem of CCD assembly\015\012CCD (image sensor) failures, particularly in conditions of high heat and humidity, led to cameras capturing images with either no picture at all, or with extreme distortion and se ... Digital Cameras

Broken camera Hi I have a centrios 4.0 mega pixels camera and it was workin fine all the time I have it 1 year and the other day i tryed to ke pics and it says low battery >>Ive trey brand new battiers also bought the recharable kind and still dont work>>it comes on for a sec then says low battery and shuts off. Please help me????

Do make sure you have the correct power loading of battery.Make sure it is the correct specification as laid down in the Manual.An incorrect battery will not have enough power to run the device ... Digital Cameras

I have a Nikon CoolPix 4300 that is about 5 years old. I mostly use it in the Macro mode for close-up photos of the sewing thimbles I sell on eBay. The last two times I've used the camera, I can take only a few pictures (2 or 3) before the camera shuts itself off. It will come back on by itself, after a while, but I have to totally reset it to take only a few pictures, then it shuts off again. I have set the auto shut off to 30 minutes, but that didn't help. I have tried several different batter

The capacitor in the circuit board is getting weak not holding the circuit open. That is why it is shutting down. The cost to repair it outweighs the cost of a new camera ... Nikon Coolpix 4300 Digital Camera

I am looking to buy a olympus m9010 camera. When you switch on the camera the date and time settings appear. If i don't set it, it will appear every time i switch the camera on. So i wanted to know if i set the date, time, year settings will that display when i transfer to my pc and when printing or it displays only on my camera LCD. i have this doubt because whatever is displayed in lcd will be the same when you transfer to PC. Hence please clarify. It will be better if you answer to the modeln

... Olympus Digital Cameras

I sent the first one back because i thought it was the camera but the new one is doing the same thing. something about setting the time zone is messed up. it will not set to the proper am or pm. if i set it at 4:30 in the afternoon the time zone time will state 4:30 a.m. and when i exit out to the main screen the time on my camera will have then changed to a.m. instead of p.m. also you cannot set the clock in the camera to 12 a.m. anything. there is no 12 on the a.m. choice of the clock. it will

... Samsung L200 Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?

\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

My Casio Exilm ExX75 was working fine for 3 YEARS. I took it to school one day while it was raining and I was checking the time with the camera but now it's displaying a yellow and black streak screen and the lens is sticking out, on or off. How do I "factory reset on advanced settings" or is there another solution?

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Casio Exilim EXZ75 Digital Camera

Hi, my camera is a EOS 400D,my problem is the built-in flash it won't work lately since i switch to a 24x105mm lens. at first it was working, but when i tried to set it up to the different modes like the P,TV,AV etc. thats the time i noticed that it was not working anymore. it pops up but it didn't fire. i need your expertise thank you.

I read that custom function 8 turns the flash off, so I guess that should be checked first thing.\015\012This web blog talks about a microswitch in the hotshoe that may be being held down by a spring or possibly stuck or broken:\015\012 ... Canon EOS 400D / Rebel XTi Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4742 seconds