Having problems with your Canon PowerShot SD1100 IS Digital Camera ?
Canon camera not turning on
\015 My canon sd1100 is won't turn on even though i have the battery fully charged.\015
Repair Help & Product Troubleshooting for Canon PowerShot SD1100 IS Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera
\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc" uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras
E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18
E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera
My Canon Powershot A460 shows Card Locked. The card switch is in the unlocked position. I have another camera. the card works in it. But the card from that camera also shows as Locked in the A460. I have tried the turn camera off and remove card, then turn camera on, then turn camera off and insert card. Both cards still shows Card Locked in the A460 and both work in the other camera
There is a lock lever inside the card slot. You could try to move it with something like a toothpick. ... Digital Cameras
I have two issues with my Canon EOS Rebel XS. One issue has been acting up for a while: If I turn the camera on and try to shoot, it tells me shooting is not possible and to turn the camera off and on again or redo the battery insertion. The only thing that works is if I take the battery out and in and turn the camera on again. The second problem started yesterday. My camera would not turn on so I thought the battery was uncharged even though I got no message saying that. But after chargi
Hi,\015\012\015\012You may get the ERR XX before (Shooting is not possible, Turn the power switch to off and on again or reinstall the battery) , where XX is the error number..\015\012\015\012Please leave the error numb ... Digital Cameras
Daate Stamp We recently lost our Canon A95 camera and replaced it with a Canon A640. We cannot get the "Date Stamp" to work on the menu. We see it listed last on the menu. However the lettering is black (not white like the others) and we cannot get on it to turn "Date Stamp" on. You Camera User Guide is useless. Please advise how to turn the Date Stamp feature on. Franklin L. Finley at [email protected]
Some functions are not available in all modes.\015\012\015\012You have to select Postcard mode to be able to enable the feature (about Page 35). Postcard ratio is 3:2.\015\012If any other ratio is selected (e.g. 3:4) then if it were ... Canon PowerShot A640 Digital Camera
When I connect my camera to the computer I don't get a popup window asking what I want to do with the camera. When I first got the camera there was no problem but after getting a new HD and reinstalling Windows XP and the Canon softwareI I can't seem to get any pictures off the camera. I do get the sound from Windows when I plug the camera into the usb port and turn it on that it recognizes somehting is there but then nothing else happens. Also when you turn the camera off Windows makes the soun
You might be able to type play back in your search bar under the start menu depending on your computer and o.s. (operating system) and bring up that window. ... Canon PowerShot A620 Digital Camera
Hi! Im Michelle from Dubai UAE, i bought my canon elph series camera last july 09 only and just yesterday after turning on the device the lens was stock up and not turning to its place anymore,.i tried to turn it off and on again but the camera is only blinking and there's a message on the screen says "Lens error, restart camera" ...I would realy appreciate any positive feedback,..Thank you very much for your kind attention Sincerely, Michelle Email:[email protected]
Hello.....\015\012sir it might be a lense problem i guess............the spring with which lense moves may be not proper............. slidin of lense is not aceessble by ur cam...........so better if show it to ur provider.......they replace it ... Canon Elph Jr. APS Point and Shoot Camera
I have a canon powershot A470 and it fell in water. after i removed the card and batteries of which still worked and neither were wet, i let the camera dry for a couple of days. it has turned on since and the screen would come on and show me the pics on the card but it kept turning itself off and the zoom lense would go in and out on it's own. now, i can't get the camera to turn on and the zoom lense it stuck. any ideas??? or should i call it a wash. i really love this camera!!! Theresa
I submerged my powershot for a couple of seconds. it did get completely wet. it was acting very strangely: the lcd wasn't working, the little orange light on the front kept flashing, and it took a few tries for the lens to extend.then ... Canon PowerShot A470 Digital Camera
Camera shutdown I've had my Canon Powershot A85 for around 2 years. Around a few dats ago, I was showing friends pictures from a holiday to America, when it appeared the batteries had run out, but the lens never retracted, which it usually would do. I attempted to turn the camera on again, and it turned on for a split second, but i never thought to look at the screen for an error mesage, but it just turned off again. Nothing was spilled on the camera, and it wasn't dropped, or any other
Sounds like the fuse went bad in the camera, If you have no power on camera most likely thats what happened, This has to be fixed by repair tec, they have to touble shoot power board. ... Canon PowerShot A85 Digital Camera
My Canon A460 says the Card is locked. The lock switch on the card is set to unlock. I have another camera with a similar card. Both cards work in the other camera. neither card will work in the A460 both say Card Locked. It must be something in the camera. I have tried the turn off remove card turn on take picture. No card message. Turn off replace either card and see Card Locked.
Back up your data first,thenyou reformat the memory card in the camera.i guess you have formatted the memory card in another device.canon cameras generally do not accept cards that have been formatted in another device.then sitch off the camera and r ... Canon PowerShot A75 Digital Camera
No matter what I have tried, my Canon Powershot S51S is not recognized when I plug it into my computer and turn the camera on. The power mode light that is supposed to turn yellow when I plug the camera into the computer never turns yellow, and my computer cannot see the camera at all! How am I supposed to download it?
Do what the pros do....use a card reader. ... Canon PowerShot S51S Digital Camera
Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five
Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera
My canon camera Ixus 8515 has an error when turning on (after some 'stuck' noises) that reads 'lens error, restart camera'. The lens is not retracting. The camera has not been dropped. Was working fine one minute, then camera appeared out of focus the next. When I turned camera off then on again, error appeared. Lens won't go back in. Have not tried forcing it as yet.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon Digital SD900 / IXUS 900 Ti Digital Camera
I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju
Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera
My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?
\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera
Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.
Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera
My flash is not working on my Canon PowerShot SX110 is camera. Help! My boss thinks the flash is turned off, but when I go to flash settings it says that red-eye and sync are both turned on. Basically I tried to use the camera outside the other night and the camera kept telling me to raise the flash even though the flash was up. The pictures were all blurry. I LOVE camera and am hoping for a simple solution.
... Canon PowerShot SX110 IS Digital Camera
I was Importing some pictures to my computer from my Canon sd 1300 is powershot digital camera , When the Battery died , I was not in the room at the time , So I came back in and attempted to turn the camera on and it said "Please change the battery pack" which means I need to charge the battery , and When the camera shut off , The lens did not close . SO I charged my battery , and the next day , I put the battery back in the camera like normal and I turned it on , and on the screen it said "Len
Since your camera is new the priviledge of your warranty claims must not be lost. So do not tamper to lose this benefit but call up the call centre of Canon for registeration/advice. What you can do is to remove the battery and keep if off . Since th ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera
Canon 450D is not being recognised by my computer (I run xp 32-bit). When I turn on the camera, windows comes up with a "install new hardware" option. I have installed the EOS utility etc. but still the camera isn't recognised by my computer. Anyone have ANY idea? This also happened with my 350D, the only time my computer recognised the camera was when I installed the software package included with the camera. Nothing off the Canon site worked for my 350D, and so far nothing is working for the
Both the Canon XT 350D and the XTi 400D are recognized by any PC with XP windows operative system. It seems you have to check your USB port or USB cable used to connect your cameras to the PC. Sometimes, the PC does not recognize a specific device co ... Canon EOS 450D Digital Camera
Hi there, I have a Canon IXUS 90 IS - the lens is extended out and won't retract when pressing the 'on' button. The camera only makes a 'turning sound ' from the motor ( I asume the motor), but the actual display in the back reads' Lens error, restart camera' The nearest camera specialist for Canon are a good 600 and 1400 km's away respectively ( I live in Durban, South Africa)so would like to rather try fix this myself before paying, most likely a similar amount to buy a new camera. Any suggest
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera
We just received our brand new canon t3i in the mail. We formatted the card (a 2GB 700X Professional High Speed Error Free (SD) Memory Card Class 10) and immediately started shooting to test out the camera. Everything seemed to work fine until we tried to apply a filter to one of the photos. The entire camera froze. We even tried turning the camera off and it would not shut off. We ended up having to take the battery out and put it back in. When we did and turned the camera back on we received a
Sounds like there was an error while the camera was writing information to the card. You can try reformatting the card using a computer and a card reader, then replace it in the camera and format it from the menu. If that doesn't work and the camera ... Canon EOS 600D Rebel T3i Digital Camera
I have a canon SD1100 I just purchased and after a few minutes the camera will not shut off, the power button won't work and I have to open the battery cover to turn it off. Somehow this completely drains the battery too every time even if it was just charged. Also the camera turns itself on by itself about 10 minutes after you put the battery in it and once again you can't turn it off. I got another battery and the same thing happens. Otherwise it works fine.
If this is a new camera, you should be running back to the store to return it. ... Canon PowerShot SD1100 IS Digital Camera
Hi I recently purchased Canon Powershot Sd1200 IS. I installed the Solution Disc software but when I connect the camera to my computer there is nothing that tells me I have installed new hardware - the computer makes the ringing sound when I turn camera power on and off. Only the user guides show on my computer. Before this camera I had the Canon Powershot SD1000 and was able to download my pictures with no problem. Was told at Future Shop that it might be a problem with my computer. rnEmail
Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera
When i turned on the canon camera, and start using the shoot, the left portion of the camera where the lens is located started to get heat, what's the caused of sudden heat of the canon camera?
It's perfectly normal for digital cameras to get warm. Things like the CCD for example generate heat and due to lack of room for a proper heatsink they can use the actual metal of the camera body to get rid of that heat. If the camera get's really ho ... Canon PowerShot SD1000 Digital Camera
Canon powershot SD780 is camera. Camera shows the canon screen then turns black and beeps three times then says "lens error restart camera". I don't know how to restart...i need to use it I'm on a trip What do I do?
There's really no way to restart it if there's a physical problem with the lens. Try to power it on again but if that doesn't reset it, the camera needs to be serviced. A great site for help with these is: camerasandparts.com They just specialize in ... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera