Having problems with your Canon PowerShot SD1100 IS Digital Camera ?

My camera keeps giving me a lenses error message. It was working today and then this started.


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by a professional.

Use\015\012\015\012\015\012\015\012\015\012\015\012\015\012 these at own risk as it may further damage the camera.

Firstly ,\015\012 try connecting your ac adapter or usb cable.

Try holding the \015\012shutter button while switching on the camera.

Look at the lens , \015\012and if some of the lens 'circles' is misaligned or not concentric then \015\012try wiggling it (while holding camera lens down).

Try gently \015\012pushing or pulling the lens when it extends but this is risky as it may \015\012cause the lens barrel to slip out of its guidance system.

Another\015\012 way to do this is to place the camera lens down on a hard surface and \015\012then power it up. Be sure to use a soft cloth or something similar as to\015\012 not scratch your lens or casing. Let the lens push the camera up and \015\012down a few times and sometimes the little resistance provided by the \015\012camera is enough to get things going again.

Try hitting your \015\012camera near the lens on the body with the soft tissue on the palm of \015\012your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to \015\012replace the camera.

If it is still under warranty I would suggest\015\012 you take it in before trying any of these steps and remove any \015\012off-brand batteries or accessories as some stores are really fussy about\015\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\015\012 \015\012the advise is useful. please do not hesitate to let me know if you need \015\012any further assistance. Also, please be so kind to let me know if you \015\012found this helpful.

Regards
Andrea
Repair Help & Product Troubleshooting for Canon PowerShot SD1100 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My camera keeps giving me a lenses error message. It was working today and then this started.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Canon PowerShot SD1100 IS Digital Camera

My camera keeps giving me a lenses error message. It was working today and then this started.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon PowerShot SD1100 IS Digital Camera

My camera was fine yesterday and today it won't work- gives an error message that says "zoom error" - I charged the battery last night and put it back in. Today the lense opens and then partially closes all by itself and the error message comes on. The battery has a charge.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic Lumix DMC-FS3 Digital Camera

I have a Nikon S6 digital camera, everything about the camera seems to work fine, except for this "lens error" message I keep getting. Sometimes I'll turn it on, and I can use it just fine. But then there are other times where I have to turn it off and on in order to get it to work. And then there are those times where turning it off and on don't help. I usually give up and try again later. Sometimes it'll still give that error message, and other times, it will just work like normal. What can


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon COOLPIX S6 Digital Camera

Olympus D-435 Our camera has been working fine until last week when we started getting this error message - memory full on a blue screen when we had taken only one photo (and deleted all previous photos). Thinking there was a problem with the memory card, we removed it and used only the camera's internal memory which worked for a short while - allowing us to take 12 shots - but now it will only let us take 1 shot before giving us the error message. Is there anything I can do? Many thanks


You can try updating the firmware of the camera since this is not a problem with the memory card its with the camera itself you can check Olympus web site for software update on this.Hope that helps....... ... Digital Cameras

Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as


I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera

Canon A400 Hi, I have the above camera (canon power shot A400) and have just solved the E18 error by tapping the plastic A/V out cover - THANK YOU ! However, now, although the camera turns on, lense extends and I get full working order - after a few minutes I get the message 'Change batteriers'. and the camera dies. I have now put in several new batteries (including the little(cr1220) but the same message keeps coming up and the screen and the whole thing dies after a few seconds. Is this a furt


Having using standard LR6 batteries in a Canon before you will only get 3 or 4 pics max before it drains the batteries. You really need high power AA's like 2300mAH+ rechargeables for any good performance or Lithium AA's ... Canon PowerShot A400 Digital Camera

I have a Sony Cybershot DSC-P92 and it always has been working properly untill today. When I inserted a fresh pair of charged batteries the powerlight immediatly comes on, even before I turned the camera on. When I press the powerbutton and the camera starts I have to re-set the date, which is odd. After that done and ready for use the flash doesn't go off and it starts beeping and displays an error message: E:91.01 Is this problem fixable or should I throw it out of the window (metaforica


Haven't I wanted to Throw it out the window before as well. That was a good chuckle but no you don't need to do that, what's happened is that the internal battery the one that keep the day date time and anything else programed into the camera alive w ... Sony Cyber-Shot DSC-P92 Digital Camera

Nikon s51 coolpix "lens error" upon start up yeah my nikon s51 coolpix camera worked like champ, for about 8 mos, darn thing giving me "lens error" message , wont let me look at pictures nothing!!!!!pisses me off too. piece of **** company because they should do a recall and replace every single camera that has this problem. thanks norcal-ron


I had the error and i just banged the left side of the camera against my palm a few times and turned it back on. It worked for me maybe it will work for you ... Nikon Coolpix S51c Digital Camera

Aperture ring I have a nikon d-200 I have 2 lenses that my camera gives an EE error msg to 35-70 and 50 mm it just started giving this msg. It has always worked with no problems, can I trouble shoot this or is this a camera issue that need to go to the shop for?


Yeah sorry, that's what i meant, Nikon.Try to clean lens contacts on the camera with alcohol. ... Nikon D200 Body Only Digital Camera

No matter what I do, my camera keeps giving me a "Battery Depleted" message whenever I try to turn it on. It's a Pentax Optio E40, and I've only had it a couple of weeks. It was working fine, but then one day when I tried to turn it on, I got this error. I replaced the batteries, but the error still came. I've checked the orientation of the batteries, tried re-inserting them, etc, but nothing seems to work. Please help! Thank you!


I had the same problem and checked the manual. If you haven't used the camera in a while and there were either no batteries or dead batteries in it, put in new batteries, keep it off, and WAIT a few minutes. Then try to turn it on. This helped with P ... Pentax Digital Cameras

I can't turn my camera on,I press the power button,it gives me a whirling noise,the lenses come out(but not all the way),the picture on the screen is blurry,and I can't make a shot,and after2 seconds the lenses come back in by itself.Then it does it again,without me even pressing any button!But I can still view my pictures.But I can't download them on computer,because it still displays an error message D: 5fo8 5e02,and the lenses start moving again.I don't know how to fix it.Please help me.Becau


The camera may be faulty or it needs to be reset to the factory settings.\015\012Try removing the battery leave it out for at least 1/2 hour, then replace the battery.\015\012If it doesn't work then you need a new camera. ... Olympus Stylus 700 / 700 Digital Camera

Keep getting a message saying zoom error on my fuji finepix A607 digital camera. Camera switching on ok but zoom lense not working. Camera not taking photographs but i can view pictures that are on the memory card.


Had the same problem, but I just "fixed" mine! I slammed mine on the kitchen counter while holding down the shutter button and sliding the "on" button at the same time. The camera is working fine now. Obviously, my camera was not under warranty and I ... Fuji FinePix S1000FD Digital Camera

Canon 1000D Hello there, I'm in China at the Beijing games. my 1000D is giving me a error message 99. can't take picture. I have turn it off and on, take the battery out but the problem still come back after 4 or 5 snaps. please help. I have change lenses and clear the head but not winning. Thanx well i have the similar problem, that i could identify that the camera goes off state after 30 mins, then i found that the display power cannot come, but the camera is working with view finder, if i


Yep set the auto turn off higher and instead of removing the battery, just open and close the battery compartment.This appears to be a problem I have raised with Canon, hopefully they will release a firmware update soon to fix this ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

My camera was working just fine and suddenly it started giving me the following message: "lens error, restart camera"


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon Powershot A1000IS Digital Camera

Hi I have panasonic Lumix DMC-FZ20 and when I start camera on the display it come with message "plz turn camera off and then on again." But it dont really do anything when restart occurs. It keep showing same message. Although it allow me to see old pics when started with play mode but dont start if the message has already on display. Moreover, when this message is on it wont allow me to work with any of the camera function including zoom in/out. . . Many Thanks . . .


Usually when this message pops up it indicates the lens position is jammed, you will need a camera technician to assess the item for repair cost. ... Panasonic Lumix DMC-FZ20 Digital Camera

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

My Kodak EasyShare C142 keeps telling me that it cannot read the 2G memory card. I have had the same memory card since I bought the camera new 2 months ago I just took pics with it 2 days ago and when I powered it up today it is giving me an error saying that the memory card in "unreadable". I tried another card and the same thing. I checked the cards by putting them in a memory stick and both cards work fine. Can you please let me know if there is anything I can do to fix it? Thanks! Brad


My camera keeps telling me the internal memory is full ... Kodak EasyShare C142 Digital Camera

Lense error Yesterday i took some pictures from my EX-Z75 casio exilim camera. After sometimes it stopped working. When i turn it on it turn off it self just after few seconds and lense just keep remain outside. And when i press trun on/off bunnen twice then the lense goes in side. It can not remain on. Y;day it shoed me lense error on my screen. What shout I do? Its not even compelete a year i bought this camera.


Send it in for repair. their is no easy fix for this sorry. www.digitalcamrepair.com can help. ... Casio Exilim EX-Z750 Digital Camera

Flash Error Hi there, bought this camera about 6 months ago. I'm intermittently getting a problem with the pop-up flash. It pops up fine, but the screen gives me an error telling me it hasn't and won't take any shots. Have to keep switching it off and on and hoping it will work again. Sometimes it's a couple of days before it works again. It will take shots when I switch the camera to the 'no flash' setting, so it does seem to be just the flash. The error says that the flash release is jamming,


The error 5 can mean that there is something blocking the flash from popping up. If it is up but still get the message then you need to check to see if the little black pin/stick that lets the camera know that the flash is up, is not stuck. With the ... Canon EOS 400D / Rebel XTi Digital Camera

Lense Error hi i have got a nikon camera which worked for more than two years now. and it started showing lense error and wont work anymore. please help


Try the procedures in this tip. ... Nikon COOLPIX L3 Digital Camera

Hi I have a Sont Cyber-Shoot DSC-T10 camera but it keeps giving me a E:62:10 error message please tell me how to get rid of it. ps there dorsn't seem to be a fault with the camera apart from the error message Many thanks


A letter and number error code of E:61:xx , E:62:xx , or E:91:xx is an indication a malfunction has occurred in the camera. To try resolving any of these error codes, ... Sony Cyber-shot DSC-T10 Digital Camera

Error Message Hello! Every time I turn My Sony camera on it starts beeping and and giving me the error message "Turn the power off and on again." I've tried turning it off and back on, along with taking the battery out and putting it back in and even pressing the reset button and I'm still continuing to get the same error message. Any ideas on what I can try next?


I have the same problem ... Sony Cyber-Shot DSC-L1 Digital Camera

Power doesn't work properly. When I turn off camera with power button, lense stays out. When I turn on, the lense goes in then back out again, but after a few seconds, I get the message: "Please turn camera off then on again." If I don't do anything, the camera will turn off by itself, and the lense will go in. Battery is fully charged, and nothing dramatic happened to start this problem...


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FX8 Digital Camera

I have a Canon EOS Digital Rebel XT with the original 18-55mm lense and a Quantarey 70-300mm lense. Have had all pieces for 3 years now and everything worked great until last night. Camera focuses and works fine with the small lense but with the zoom lense it will not focus and I get an Error 001 message????


This means that the communication with the Quantarey lens is not the right one.\015\012\015\012You can try in cleaning the lens contacts and the camera contacts with a pencil eraser or a white erase (flip down the camera so no particles g ... Canon Rebel XT / EOS 350D Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5197 seconds