Having problems with your Canon PowerShot SD1100 IS Digital Camera ?

Impossible to reset the camera, it is bloked out with a error message to reset the camera. objectif (focus) stayed out



Answers :

Remove the batteries from the camera for a few mInutes and reinstall, that should reset back to normal.
Repair Help & Product Troubleshooting for Canon PowerShot SD1100 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Impossible to reset the camera, it is bloked out with a error message to reset the camera. objectif (focus) stayed out


Remove the batteries from the camera for a few mInutes and reinstall, that should reset back to normal. ... Canon PowerShot SD1100 IS Digital Camera

When I turn on the camera the zoom lense goes in and out and it says" PLEASE TURN CAMERA OFF AND THEN ON AGAIN" When I turn it off the lens stays out and when I run it on it gives the same error message and it will not focus or let me move the lens in or out.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Panasonic DMC-TZ5 Digital Camera

Error Message I recharged my battery last night after taking pictures and modifying some photos. This morning I turned on my camera because I was going to tr and download pics onto computer. I plugged in cord to the camera and to the printer port (that may have been my mistake) Nothing happened, since the camera wasn't on. I turned on the camera and I got this error message (on a red screen): Camera hs experienced an error. 00000013-2F6B-FFF-298 Please reset your camera I tried the lightly smack


Tried to take pics but got msg that battery is not charge enough to take pics.  I charged the battery overnight and nothing.  I turn on the camera and the little blue light illuminates for 1 sec and goes out, still no charge.  Do I nee ... HP Photosmart R727 Digital Camera

I have a small Panasonic Lumix DMC-TZ5 camera. After fully charging the battery I am all of then sudden getting this error message :"please turn camera off and then on again." When the camer is OFF the lens is extended and open. When I move the camera to ON the lens moves in to the closed position closes, then reopens, extends, tries to focus, is unable to and the error message appears "Please turn camera off and then on again" This cycle just repeats. The lens is able to extend it is not st


Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... Panasonic Lumix DMC-FZ7 Digital Camera

Error message my nikon D -80 is flahing an error message. When i try to take a photograph i hear it cycle, but nothing is taken. The automatic focus does not work. I think i might have turned the camera off by accident while it was writing a photo to my card *sighs* I have tried removing the battery, a new card, remove and replace the lens, remove lens and clean contact, and talking very sweetly to the camrea. Nothing worked and the same messages is displayed when i turn the camera on. Any advic


This may be due to the aperture ring in your lens. Try the following:\015\012\015\0121. Turn off your camera\015\0122. Move the aperture ring clockwise then lock\015\0123. Turn on your camera and try again.\015\012 ... Nikon D80 Digital Camera with 18-135mm Lens

When i turn on my camera it zooms in and out over and over never focusing and then displays the message ''PLEASE TURN CAMERA OFF AND THEN ON AGAIN''. When i do this it repeats the smae thing evey time i turn the camera on. AND IT HAS THE ERRORS SYSTEM ERROR FOCUS


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Panasonic Lumix DMC-FX7 Digital Camera

When I attempt to turn on the camera it gives me a lens error message.the camera makes a shuttering sound while trying to focus but it can not focus then gives me the error message.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Nikon COOLPIX L18 Digital Camera

Error Message Hello! Every time I turn My Sony camera on it starts beeping and and giving me the error message "Turn the power off and on again." I've tried turning it off and back on, along with taking the battery out and putting it back in and even pressing the reset button and I'm still continuing to get the same error message. Any ideas on what I can try next?


I have the same problem ... Sony Cyber-Shot DSC-L1 Digital Camera

Hi there i have a auto focus problem. i used mt 50D for the first time on saturday, after about 100 shots Err99 appeared, i turned the camera off and took the battery out an the error message never occured again, however since then the camera will not auto focus correctly with my 17-40 IS lens. the lens has worked perfectly on my 20D for the past couple of years. When going from close focus to distant focus (and distant to close) there is no autofocus whatsoever. the focus points highlight i


The camera is having problems with your lens and this is why it goues into the error mode. Try first cleaning the interface contacts on the lens ( see enclosed pic ) . If this does not sort the problem out then the auto focus motor ( or related hardw ... Canon Digital Cameras

I cannot get my camera to focus on anything further than about 20metres either on auto focus, infinity or manual focus. Focus seems to be ok on closer distances. For a period of time today I had a Lense Error message onthe monitor screen, this message has now disappeared. Any suggestions will be much appreciated. Regards James Kirk [email protected]


Hi..the focus of the picture depends upon your camera \015\012zoom facility.check that out.what was the error message \015\012it was showing.\015\012thank u.. ... Digital Cameras

E:61:10 My camera just stopped focusing. I can take pictures but they are blurry and my screen flashes the error code E:61:10. I have tried turning it off and on, taking the battery out, changing the settings, nothing works. I can't find a reset button on the camera anywhere. Does anyone know how to resolve this problem? I have a DSC-T20 Sony Cyber Shot digital camera. An error E:61:10 came today all of a sudden. The screen is blurry and the zoom does not work. The camera has not been wet o


Thx a lot guys... The "sony smack" really works... My friend dropped the cam when he was to take a pic of me and my date at a dinner... I was scared, and didn't know what to do until I came to this site...At first it disappeared, but came back after ... Sony Cyber-shot DSC-T20 Digital Camera

Olympus 4050sw. when i switch on the camera it gives me an error message saying clean card (which i tried several times) or giving me the option to format. i've recovered my pictures from the card through my pc and the pc recognises the card and the pictures fine. now when i try to format it says "card error". I've even tried resetting back to default and it still says "card error". help! is there some way i can do a hard reset?


... Olympus Stylus / mju 1050 SW Digital Camera

I dropped my camera. In the off position, the lens stays open and projected. Then turning to the on position the lens goes in, then out again. Then I receive the message "Please turn camera off and then on again." Before receiving this message, the screen looks normal, as if it will work, but then the message comes up. I took the battery out to try to reset, but no change. Any suggestioins?


HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will need to ... Panasonic Lumix DMC-FX8 Digital Camera

Has always worked fine, til just now. took a photo, went to put onto ebay and opened picture using windows picture and fax viewer. not happy with photo,switched off, removed camera from cradle (link to pc) and tried to take another photo, but when i switched the camera on i had an error message stating 'focus error' and when i tried to switch it off the zoom lens remained extended and will not go back into tne camera. I have read the manual and tried removing and replacing the battery, but this


For your information the computer has nothing to do with the focus error!!!!the error appears as a message due to either of these reasons.\015\012\015\012you have dropped down the cam.remember even a small drop may ca ... Fuji FinePix F410 Digital Camera

When i power on the Camera F72 EXR it comes up with an Error message that says turn camera off and then turn back on, i do that an the same error keeps popping up, also when camera shuts off the lense fails to collaps and stays open in the off position


Whenever I've seen that before it's caused by the camera being dropped on its lens while the lens was out. It can be repaired though it's fairly expensive too, in my honest opinion you'd be better off getting a new camera. ... Digital Cameras

Error message I have an older DX3700 that taks very good photos but now I have an error message on the screen: Warning-card door was opened. I can't get rid of the message and the camera will do nothing except turn on and off! I even removed the battery for a while. It makes no difference if a card is in or out. How do I reset it?


Looks like it needs a repair...\015\012\015\012http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=751/7269&p ... Kodak EasyShare DX3700 Digital Camera

Auto focus no longer works. Every time I turn the camera on, I get the ''Please turn camera off and then on again message''. When I do that, it can focus in the default lens position, but as soon as I move the lens, it is not able to focus. Battery is fully charged. All settings were reset to default. Formatted SD, and upgraded to V1.2 software. Still no help.


Fast of all happy new year \015\012 your problem is only about your cam machanisam which is not adjast at right position you have to open it and rearange rightly.\015\012 for this you have to right tools for it or y ... Panasonic Digital Cameras

My Canon is SD 1400is model. Recenly it dropped. Since then it shows E32 error message and then shut down later. I have to turn on the camera again. The focus seems okay but the message keeps showing up. Is there anyway to remove this error message?


Did you get a solution to this problem? ... Digital Cameras

Error message: Please turn camera off and then on again when camera is switched on. Battery is full ... it looks like everything is working well when camera is switched on. When switched off ... same message comes back up again .... Is there a reset function ??? Kind regards Matt


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Panasonic Lumix DMC-TZ1 Digital Camera

Cannon Power Shot SD600: I receive the following message every time when powering up the camera: "Lens error, restart camera". The camera will not reset or proceed beyond this message.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon Digital Cameras

Focus error message camera wontwork


I found this site to solve this problem. I got as far as tapping the lens, while turning it off. That worked but I still could not take pictures, so, I got the idea to put slight pressure on the lens when turning the camera on and was delighted to se ... Fuji FinePix A500 Digital Camera

Panasonic NV-DS27EG problem: sudden degradation in function following (though could be coincidence) first ever use of DV-out socket on camera (to connect Dv-in on Panasonic DVD recorder). First symptom: no picture displayed when attempting to play back a tape in VCR mode. Second symptom: power light stayed on even when camera switch was at the off position. Third symptom: message in viewfinder asking for the reset button to be pressed. Found and pressed reset button then: Fourth symptom: "to ser


... Panasonic Digital Cameras

Password Error I must have accidentally reset my 4 digit password. Now I just get an error message when I enter my password. Is there anyway to reset the camera to the default "0000"


To reset the password:Turn unit on and wait for password promptDepress the and hold the enter button until cameraswitches into 5-digit password mode _ _ _ _ _.Trail sentry systems will not indicat ... Bushnell Trail Sentry 11-9200 Digital Camera

Press on button,zoom error message appears on screen. focus is inoperable and screen will not resolve. Shutter button is also inoperable and focus lever is sticky and clicky. Please ADVISE. Battery is OK, playback is ok no error on Memory card, camera is 2 years old in daily use and no other issues to date.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed ... Fuji FinePix F47fd Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?


Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4186 seconds