Having problems with your Canon PowerShot SD110 / IXUS IIs Digital Camera ?

The LCD monitor setting was lost after changed battery pack

\015 Canon Powershot SD 110 digital camera was showing the message 'change battery pack'. I put a new battery pack and is the correct one, charged first, however the LCD monitor is blank. The manual says that it could happen, but it does not say how to fix it.\015\012Thanks\015

Answers :

Take a picture with the new battery pack. Is the picture also blank? Are the menu selections still visible in the LCD? Have you tried pressing the DISP button on the back, but the screen still remains blank?
\015\012
\015\012If the answer is yes to these three questions, this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check this link for more info.
\015\012
\015\012Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 30/30a/200a/300a/D320/400/ 450/500
Repair Help & Product Troubleshooting for Canon PowerShot SD110 / IXUS IIs Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The LCD monitor setting was lost after changed battery pack


Take a picture with the new battery pack. Is the picture also blank? Are the menu selections still visible in the LCD? Have you tried pressing the DISP button on the back, but the screen still remains blank? \015\012\015\012If the ans ... Canon PowerShot SD110 / IXUS IIs Digital Camera

Powershot SD1000 Cannot get an image on the LCD Monitor while in camera mode but previous pictures can be viewed normally. Other functions of the camera appear to work properly. I replaced battery--no change. I feel it may be a setting issue but I really don't know. Is there a way to default the settings?


HI there when you go for click the image that time on your LCD screen. Right now its off and its in viewfinder mode. So press the switch for LCD on so , you can see the image in LCD in camera mode. Thanks. ... Canon PowerShot SD1000 Digital Camera

The camera when switched on displays in the top lcd display 'Err' yet shows battery as fully charged. ive reformatted my memory card via pc. changed the lithium cr 123a batteries for new ones. fully charged the 4 x AA batteries. the aperture ring lock is set to 22 on the 28mm-80mm af nikkor d lens. i have it set to af and auto but have tried all other camera setting i can access. it will focus no problem yet will not allow me to do anything else. i cannot access the menu eg func, play, in


Hi.Err means that the camera is in fault mode. There is no code, so that the fault is generic. This kind of error is often associated with shutter problems or other loens error. If you have a spare lens, remove battery and test the spare ... Fuji FinePix S1 Pro Digital Camera

Battery Problem My 18-month-old Canon A70 is giving "change the battery pack" message and turning off constantly, even though I have fully charged three different sets of new rechargeable batteries and rotate them as soon as the message comes on. Sometimes with this message I pull out one charged set and put the same back in, and it works fine for quite awhile, then repeats later. I imagine this is a problem in the camera battery power circuit or something. Never happens when plugged into the co


I figured out the problem. My AA battery recharger was not making good contact, so although it said the batteries were recharged, this was not the case. After fixing this and getting full recharges, the problem went away. ... Canon PowerShot A70 Digital Camera

BATTERY DISCHARGE I have an Olympus FE 210 Digital Camera and had been using the same for over 3 months. Recently I observed a problem in the same. When I put the camera on, I can browse on the LCD screen and can see the snaps available in the memory. However, when I try to click a new snap, before the flash could pick up, the LCD screen trurns blue and starts showing the signal "BATTERY EMPTY". I changed many sets of new batteries but the problem continues. I am not able to use the camera for c


This is the worst camera I have ever owned. There is nothing wrong with your batteries. The Battery Empty sign lights up even when I know they are full. It happens all the time with mine. I believe it to be the contacts in the battery compartment. Wh ... Olympus FE-210 Digital Camera

D40X LCD Hi Dear Because of the removal of the control panel LCD the D40X uses the main LCD monitor for camera information display and the change of settings. By default this display is not shown, instead you press the 'info' button to show or hide it, you can optionally have the display on all the time. My question is: What i have to do for have the LCD always on. Thank you Quim


Return the control panel in order back to normal. ... Nikon D40x Digital Camera

I have an ist D L. I would like not to use the viewfinder to take pictures , rather the LCD monitor, but the images I focus on does not appear on the monitor. Is there a setting I can change to enable me to do this? (Playback working perfectly)


Sorry, that is not possible with this camera as it sies nit have "live view" ... Pentax *ist DL Digital Camera

First let me say that I know nothing about the camcorded (600x digital zoom). It was my sons and he bought a new one and gave me his. I charged the batteries and put them in and I put the proper vhs cassett in. When I turn it on and set it on A, the lcd monitor says Demostration mode and it shows all the effects and features over and over. I set Recording start/stop on A and pressed the red button but nothing happens. It just continues showing featues. Can you help me.


I took the battries and cartridge out and started all over. The cart. was stuck. That must have been the problem because when I put everything back, it worked. That you for responing. Arlene Gerrity ... JVC Digital Cameras

Lost AutoFocus My camera is new, bought 2 days ago, and yesterday I was changing the modes wheel (on top). Then I noticed it couldn't set focus at all, anymore! Should this be a problem with the camera, or can fix it by changing some configuration? At Scene mode, appears a [CAF] icon at left botton of the LCD screen (not documented in manual).


Set focus - it is autofocus is it not?\015\012 Take a few pictures and check whether they are sharp or not\015\012Also make sure your finger is away from the sensor window when holding the camera ... Samsung Digimax S630 Digital Camera

I hadnt used the camara for 6 months or so, and it said change the batteries. I put in new batteries, I turn the camara on, and the pop-out screen(LCD monitor) is flickering, I take a picture and it just shows black w/ a little pink/purple


Try cleaning the battery contacts in the camera with a cotton swab lightly dampened with rubbing alcohol. ... Canon PowerShot S1 IS Digital Camera

I just bought a Nikon D40. The monitor shuts off after being on for only 5 secs. I Have tried changing out the battery with a fully charged one and the problem persists. Is there a way to set the duration of the monitor being on? Is there some sort of power saver option? Thanx Skip B


Yes , it is a power saver. I remember there being a way to change it in the menus. Note: the "monitor" stays on for different times depending on mode. There is a manual on line. I had better luck just playing with the menus. The menu your looking for ... Nikon D40 Digital Camera with 18-135mm lens

Hi!! I inherited a Konica Dynax Maxxum 5D it takes great pictures, but I can't figure out how to get the LCD monitor to show the picture I am taking...it is on a blue screen with functions and settings, but I can't find where in those settings to change it back to seeing the view by looking at the screen, I always have to look through the view finder to shoot a pic. Hope you can help, Thanks a lot, Cath


To see the picture you want to take on the screen, your camera needs to have a feature called "live view". I'm not sure if your camera has that feature. It's a relatively new feature on more expensive cameras. Check your owner's manual. ... Konica Minolta Dynax 5D / Maxxum 5D Digital Camera

Help No image in the viewfinder or on the lcd screen when in shooting mode. Have amber light rather than green. In playback mode images appear on lcd screen. Was working fine the last time I used it and have changed the batteries to newly charged. Have also reset to default settings.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot S1 IS Digital Camera

Change the battery pack when new battery pack is inserted. We thought it might be our charger or the battery pack is just old. So we bought 6 new batteries and charged them on our firends cannon power shot charger put them in her camera and had no problem. We then put them in our cannon and received the change battery pack display with in minutes on some and instantly on others. Is there a issues with the connectors? The latch mechanism that holds the battery in and the ejector spring are also f


... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Canon SD900 selection options not responsive. The selector wheel, Function Set button and menu selector only work from time to time. Even if pressing the ring brings up info to the LCD, nothing can be changed because the Function Button and the Menu button are not active. This is a random problem. Sometime, I can bring all functions back to life by removing and re-inserting the battery and restarting.


Sounds like the board has become damp and possibly corroded in certain parts this causing the random effect with the buttons their isnt much you can do unless you can remove the case yourself and give it a good clean but doing this is extremely diffi ... Digital Cameras

Stopped working I've had a Olympus D-360L for several years. Have never had a problem until today. When I open the lens cover the green light keeps blinking and won't stop.Nothing happens when I push the shutter release. The LCD monitor works. I deleted some pictures and downloaded others to my PC this am. When I went to use it later in the day the above problem occured. At present there are only 4 pictures on the card. I've put in new batteries, nothing changed. Can you advise me as to what mig


Check the cover and make sure the switch is making good contact... also if the cover is loose... tighten up the screws ... Olympus Camedia C-350 Digital Camera

When I turn my camera on I only see a dark blue and black image with white lines running through it--could I have damaged something or have I messed up my settings? I can look at previous pictures taken, they look fine, I just can't figure out why I can't see anything through the view finder or LCD monitor in order to take new pics. i have been reading through the manual, tried new batteries (regular AA)--any suggestions?


This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot S1 IS Digital Camera

When I turn on camera, get message "change the battery pack" and then camera turns off. Also, where I can get an instruction manual -- I must have lost mine. Thanks,


Rechargeable batteries don't last forever. Lithium batteries in particular can fail early if they are allowed to become totally discharged. The best way to proceed is to buy a new battery, then try to charge it. If it charges and the came ... Canon PowerShot SD1100 IS Digital Camera

Black screen Yesterday I grabbed my camara for a not to be missed shot and found that I too have the same problem now of the black image through the view finder and on the lcd screen. I have replaced the batteries, tried changing settings and nothing works. I too can see the icons and view previously taken pictures but can take no new ones. I feel that paying $350 for a disposable camara is a bit much! I purchased it just a little over a year ago. I saw on the Canon website that they are fixing


This happened to me then my camer just started working again after playing around with the modes ... Canon PowerShot S3 IS Digital Camera

I got ERR message on the top left of my lcd monitor D90. I already remove my battery pack. After 1 shot, the ERR message keep appearing. What should I do? Need your assistance.


... Nikon D90 Digital Camera with 18-105mm lens

Panasonic Lumix DMC-T25 When I try to take a picture using any flash mode or on any setting, the flash on the LCD blinks red and will not take a picture. All was going fine during child's birthday party then suddenly started doing this. I have changed batteries but still the same


If you keep getting the problem and you already tried different sets of replacement batteries, then the flash is faulty, usually flash assembly capacitor has blown.To fix the fault there is need to disassemble the camera and replace the f ... Panasonic Digital Cameras

The lcd monitor will display pictures taken on the disk already but whent taking a picture the screen is blank. I just changed the batteries.........


It is known problem of ccd imager chip failure in Canon A85 camera and Canon offers free of cost ccd imager chip replacement to fix it.Click ... Canon PowerShot A85 Digital Camera

Hi, i have a sony alpha DSLR- A200 that is working well but now i can't get the menu display to work - when i take a picture i can quickly see the play back on the lcd monitor but if i press play or menu nothing appears on the lcd monitor. Then menu usually will show me battery life, etc but I can't find any of that..I have tried recharging the battery, removing and re-inserting the battery and the memory card and no luck. I can take photos and download them I just can't review anything on the


... Sony Alpha DSLR-A200 Digital Camera

I have had my S9600 for 4 years, for most of that time, when i changed the batteries, all my settings remained the same. Now, when i change the batteries, every setting has returned to factory standard (stupid beeps and whirring noises, no date etc) and i have to reset everything. The user manual has no mention of an internal battery, but i figure there must be one and it now needs replacing. How do I do this?


My camera has refused to power up despite fresh batteries - I have had no response. I left it overnight as suggested in the manual - but still nothing. It hasn't been used for a few months and was left without batteries for fear of leaking. Any ideas ... Fuji Finepix S9600 Digital Camera

Change Batteries....? Hi there, I have owned the Canon A 95 for almost 2 years now. Since a couple of weeks back its not been working at all. It keeps saying "Change Batteries" even after i put in a new set of batteries. After a few seconds of turning it on, it says Change Batteries and shuts off. Triedputting in new batteris a few times but still no luck. Any help would be highly appreciated!


Ok.. did you guys try a reset? Just remove the batteries, wait for 60 seconds then put them back in.. that should reset the camera.. ... Canon PowerShot A95 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2972 seconds