Having problems with your Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera ?

I connect my canon ixcus95 IS to my computer, switch it on and select Transfer. Fault screen pops up with "SAVER FOLDER NOT FOUND" It's worked perfectly up to now and I have tried uninstalling and re-installed but no-go so far. I've checked back into my rubbish bin to see if I have inadvertently deleted something but nothing there. Help please. Les


Answers :

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use ZoomBrowser or any other photo cataloging program.
Repair Help & Product Troubleshooting for Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I connect my canon ixcus95 IS to my computer, switch it on and select Transfer. Fault screen pops up with "SAVER FOLDER NOT FOUND" It's worked perfectly up to now and I have tried uninstalling and re-installed but no-go so far. I've checked back into my rubbish bin to see if I have inadvertently deleted something but nothing there. Help please. Les


Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

My computer (Vista 32-bit) does not recognize my Canon Eos Xs now. It did last week. I looked it up on Control Panel/System/Devices and I see this message "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available." Windows checked for a driver upgrade and reported that what is installed is the latest softw


Sounds like you may have some corruption beginning on your hard disk - try running CHKDSK /F from an administratively-enabled command prompt. It will prompt you to reboot, then it will run a consistency check on the disk and its filesystem upon boot ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Card Error Hello. I am having a problem with my camera reading my card. My card was working fine. I took the card out to have the pics saved onto a disk. When I put my card back in my camera it first said that the card was full but it would not pull up any pictures. So I panicked because I thought I had lost all my pictures and I went back to Target and checked out my card to see if it still had pictures on it. It did....so I saved all the pictures to a cd and I was then going to delete th


Appears to have bent pins ... check the slot.. should be two even rows of pins ... Olympus EVOLT E-500 Digital Camera

I have the ge a730 and a few years back my cousin knocked it off the table. I checked to see if it worked and it did no problem. I went back five min. later and it turned on fine but the lens got stuc


I suggest check in this link, some tips about fixing-lens-error-on-digital-camera. ... GE A730 Digital Camera

Kodak Easyshare My husband has deleted some files from the computer i recovered them all out of recycle bin but my photo's from kodak have not come back, when i click on to kodak, i can see the pictures in small thumbnails, but if i click on a picure or try to burn them on to cd it says file has been deleted or moved i have searched all comp is there anyway i can get them back Thank you


OK! You need firstly recover these deleted/moved pictures back from this Kodak camera with a camera data recovery\012freeware here: ... Digital Cameras

My sanyo vpc-1060 camera will turn on for about 3 seconds then turn off, the lens is stuck out also and will not go back in. I checked the contacts inside the battery compartment and i didnt see any corrosion.


Hi,This is a common problem on this set. The lens error is common for cameras with telescoping lenses.\015\012\015\012You can help the motor by connecting the AV cable --- this keeps the LCD off and ... Sanyo VPC-T1060 Digital Camera

How do i check back to see my pictures and i can,t find a user manual for the vivi cam x327


Press the HOME button to enter the Playback mode.The description starts on page 35 of the manual you can download at http://vivitar.com/files_products/10/ViviCam_X327_Camera_Manual.pdf ... Vivitar ViviCam X327 Digital Camera

Camera had beer spilled over it. Not much but enough to stop it working. I took it to a camera repair shop in Vitnam, The guy said he could fix it and went to work on it, when i got it back it worked perfect for a while and all of a sudden it stopped showing an image on the display. I can however look at previously taken photos. Just cant take new ones. If i take a photo and then check if an image came out (even though i couldn't see an image when i took the photo) nothing is shown. I really hat


Which model camera have you got? you listed in Fuji F470 but your last piece in you description says F47fd. I can offer help either way but please clarify.\015\012Thanks ... Fuji FinePix F470 Digital Camera

I bought a replacement LCD screen for my Nikon S3000 camera, but when I remove the back case, the connector for the LCD is under the silver plate. I can't figure out how to get the plate off to reach the connector so I can install the new LCD. I've removed screws, but it still lifts only halfway. Is there some kind of trick I'm not seeing to get this thing open?


Hi dear Sir, contact uscamera.com to obtain a repair manual.Regards ... Nikon Coolpix S3000 Digital Camera

LCD screen don't work, camera still takes pictures and I am able to see then in the computer. To check the software version (holding the back button while turning the camera on), the display works.


Need to take it to a CAMERA SHOP REPAIR for adjustments and correct this problem . AJ ... Fuji FinePix A820 Digital Camera

Kodak v610 camera (easy share) My 10 year son was using our v610 camera and the following error message E45 (please see user manual) appeared on the screen. We were unable to switch the camera off and therefore the shutter remained open. The shutter will only close if I remove and replace the battery and when I turn the camera back on the shutter remains open and the same error message returns. I have checked the manual and it doesn't mention this problem. thank you jane


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Kodak EasyShare V610 Digital Camera

Memory card errors. I turn it on and get message MEMORY CARD ERROR PLEASE CHECK CARD. Occurs on different cards. Sometimes I can clean the contacts on the card and it will work. Sometimes, I can take pictures but if I remove the card it cannot be read if install it back or by a computer or printer. I use the camera as publicity in trade shows taking then printing pictures, so the cards are removed and inserted constantly. I have reformatted the card in the camera, still fails.


Hi wait a moment pls your request is been proceeding.. ... Panasonic Lumix DMC-FZ18 Digital Camera

I bought a replacement LCD screen, but when I remove the back case, the connector for the LCD is *under* the silver plate. I can't figure out how to get the plate off to reach the connector so I can install the new LCD. I've removed screws, but it still lifts only halfway. Is there some kind of trick I'm not seeing to get this thing open?


Hi dear Sir fishiemnma, remove the broken LCD display lifting it up carefully of retention plate.You did not make? will you have access to the connector afterwards.Regards ... Nikon Coolpix S3000 Digital Camera

I just purchased (about one month ago)a Canon 50 D with 28-135 is. Yesterday I recieved a Canon 2.8 IS L 70 -200mm. When I mount the camera to the lens ( the 70-200) I notice a little wiggle in the mount attachment. I went back and checked to see if my other canon and Sigma lenses do this on the 50 d and they do. I just seems more noticeable with the larger lens. Is this normal?


The larger lens is longer and the wiggle is the same amount of play but closer to the end of the lens it moves more due to it being longer/larger. Just insure there is no substantial movement at the actual connection or lens and body. It should lock ... Canon EOS 50D Digital Camera with 28-135mm lens

Photo recognition i have a 4gb sd card installed and taken 352 photos and now when i take photos and go back to see the last photos taken a large yellow question mark is displayed instead of the photo captured.the original 352 photos are ok tho.some display a tiny pic of the photo taken but these can not be downloaded to the computer


Try using a CF card reader ... when you hook the CF card reader to the PC .. it will open up the cf card as a drive.. you can download the pics by copy and paste... \015\012\015\012reformat the card after that ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Sony NEX 5R Play Memories Install Issue. I receive a pmb.msi installation failed message in trying to install Play Memories for my new Sony NEX 5R camera. Was on the phone with Sony support for more than an hour Thurs afternoon. They tried multiple things then ran a scan and said to call back if didn't resolve. The scan said windows didn't find any integrity violations. I called back Friday morning and received a 'closed for the holiday' message. Any ideas?


... Digital Cameras

I have a Sony DSC-S950 Cyber-shot. I opened some pictures in the computer using PhotoShop to view and rotate pictures. After I rotate pictures and I resaved them back to the memory stick card, I can't view them on the camera. I only see a blue screen with File error on it. However, I still can see and reopen these pictures through the computer. Can I still print these pictures from the memory card? How can I restore back these picture files? I want to view them on my camera. Please help.


Hello,\015\012You have changed probably the format of your pictures.\015\012Please check the files on your computer. Be sure that they have saved as original name and JPEG format. Not as other picture formats. ... Sony Digital Cameras

I swapped memory cards with my daughter as mine had a bigger memory. However it didn't seem to work properly in her camera. Her camera now freezes on the opening screen when its switched on and does nothing else, the lens also refuses to go back in. I put the card back in my camera and now mine just switches off when you turn it on after making 3 blip noises! Now both cameras don't work with or without the memory card. I've checked the manual for mine which has no explainations. Also checked bat


The first mistake happened when your card was tried in your daughter's camera. She should have immediately formatted it first since the card was optimized for your camera's operating system. Since she didn't do that and tried to use it in her camera, ... Agfa DC-1030S Digital Camera

It seems that Windows 7 won't recognize the camera as a removable device. It worked ok on XP but yesterday I install windows 7 and install fuji softwer for finepix (original with camera) , connected pc and s2000 HD and.... nothing. i checked USB on PC and it works. I checked microsoft on web and it seems thet s2000hd should work normal on Windows 7 ? Help please


Why not do what the pros do to avoid this common problem...they use a separate card reader to download the pics instead of the camera.\012 ... Fuji FinePix S2000hd Digital Camera

Hi, I need your precious help. i just bought a Canon 1000D and I don't see on my LCD screen what I want to catch as picture. How to proceed please? Actually, I need to see in the viewfinder eyepiece, take the picture and then come back on the playback button to see the shot that I have taken. Can't i see directly from the LCD screen while shooting? Thanks very much. Kind regards Frederic


See Chapter 5, "Live View Shooting" in the manual. If you need a manual you may download a copy and more ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I can see the pictures I've taken on the camera just fine, but when I turn my camera on to take a new picture, I cannot see all of the scene because 1/2 of it is blocked by a black portion, so I guess you are telling me, I have bad CCD sensor. I need to check and see when I bought my camera at walmart and see if it is still under warrenty. Thanks!!


Hi,Let me know model number and brand of your camera to understand why its giving you half correct picture and rest is black.Thanks. ... Digital Cameras

Last week, i started seeing horizontal lines on the screen. sometimes it goes away and sometimes in comes back. it seems to come back when i put the camera on the sides ways or flip it upside down.


BAD CCD !see the link for free repairs from SONY dont worry if u are out of warranty and not on list just call them PLS RATE ME FIXYA for helphttp://www.imaging-resource.com/badccds.htmlhttp://esupport.sony.com/US/ ... Sony Cyber-Shot DSC-P32 Digital Camera

Had to re-install windows and when I went in to install O Master it said it was already install but I don't see it anywhere.


Go to add/remove programs and if it's on the list, you can remove it and re-install it. ... Olympus Stylus 820 Digital Camera

Heres the situation: I added some pix on the memory card via a computer. When I put the card back into the camera, I couldnt see the pictures I just added on the card. Now.. I could see these same pix on two separate computers. my problem is why dont I see them while trying to view them by using the camera?


The camera uses a slightly different format than a computer. You can go from camera to computer but not the other way. ... Canon PowerShot SD880 IS Digital Camera

Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.


This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1596 seconds