Having problems with your Canon PowerShot SD1300 IS IXUS 105 Digital Camera ?

Canon camera lens is stuck and it's asking me to restart


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon SD900 My lens is stuck out, and everytime i try and turn on my camera it makes a grinding noise and then reads on the screen, "lens error restart camera" How do i restart the camera? And how do i make the lens not stick out if the camera is off? Thanks for your help!! C


First off, see if Canon can help you. If not, the following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try:\015\012 ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

Canon camera lens is stuck and it's asking me to restart


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

I have a canon ixus 900Ti. I turned it on yesterday and the lens came out as normal. when i went to take a pic the camera shut off but the lense never retracted. when i turned the camera back on the splash screen came on, followed by a series of beeps and then and error message saying "lens error, restart camera". restarting has not solved the problem. its like the lens is stuck out. hope you can help Regards Liam


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Digital Cameras

My daughters Canon PowerShot SD750 has the lens extended and stuck, turning on the camera gives a lens error message and atates to restart camera. have tried this numerous times and no help. Camera was never dropped, was just using one day, took some pictures, then the following picture I was taking lens stuck open.


Hi. This is an unfortunate mechanism failure. You can try to reset the micro board by removing the batteries for 3 mins. If that reset doesn't work, the actual lens sensor will continue ... Canon PowerShot SD750 / IXUS 75 Digital Camera

My canon camera Ixus 8515 has an error when turning on (after some 'stuck' noises) that reads 'lens error, restart camera'. The lens is not retracting. The camera has not been dropped. Was working fine one minute, then camera appeared out of focus the next. When I turned camera off then on again, error appeared. Lens won't go back in. Have not tried forcing it as yet.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

My lens on my Canon IXUS 105 is stuck open and when I push the on/off button I get an error message which says: Lens Error Will shut down automatically Restart camera I can't view pictures, I can't press any of the buttons... I'm not sure where the restart button is. It's a very new camera, I only got it 2 weeks ago. Please help!


Hi,This is a common problem on this set. The lens error is common for cameras with telescoping lenses.\015\012\015\012You can help the motor by connecting the AV cable --- this keeps the LCD off and not d ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

I dropped my Canon SD110ois camera and now the lens is stuck open and displays Lens error, restart camera. While trying to turn on it makes a motor sound like it is trying to open but is stuck. Is it broken?


Try the procedures in this tip. ... Canon PowerShot SD1100 IS Digital Camera

My Canon PowerShot SD850 IS has a lens that is stuck in the extended position. I get a screen that says lens error, restart camera, but when I try to connect to the software, I get a screen on the computer telling me the computer cannot detect the camera. Battery is freshly charged, and I get the little yellow bird picture on the camera when I turn it on. It beeps about 4 times, and then turns off. Is there a safe way to get the lens to retract?


Don't play around with that lens, you can do more damage to the camera and focus with some of the stuff people tell you to try. Your camera just needs to be serviced and you'll be working great again. The shop that specializes in service for the powe ... Canon PowerShot SD850 IS Digital Camera

I put my camera in my backpack and the lens got stuck, it won't come out at all. When I turn the camera on it says "Lens error, restart camera". I've tried everything this site said to try but nothing has worked. My camera is a Canon Powershot A560. Does anyone know how I can fix it? Please Help!


Try these procedures. ... Canon PowerShot A560 Digital Camera

My canon powershot a590 camera lens is stuck. When I attempt to start my camera I get a message saying Lens Error Restart Camera then the camera immediately powers off.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot S2 IS Digital Camera

My canon digital ixus 100 is camera, suddenly starts displaying 'lens error, restart camera whilst i was using it. The lens is stuck out side. I can't use my camera any more. Can you help me to disassemble.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed ... Canon Powershot SD450 / IXUS 55 Digital Camera

Canon ixus 900ti lens error restart camera message coming up. Lens stuck in full out position, have tried restarting a couple of times but same thing and lens will not retract.


Canon ixus 900ti lens error ... Digital Cameras

Each attempt I ensue to power on my camera and error displays on the screen saying "Lens error, restart camera". How do I do this for it to be successful? The Lens will not retract and is somehow stuck, what am I doing wrong with the item. It is an A480 Canon camera.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Canon PowerShot A480 Digital Camera

I have a canon powershot SD 1000. The lense is stuck out. When I go to turn on the camera it says "lens error, restart camera". I don't know how to do this or how to get the lens back it. Help?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD1000 Digital Camera

I have a canon sd780. The lens is stuck open right now and when i try to turn the camera on, the green light blinks for a while, and then it says "Lens Error. Restart camera." But it does this every time. How do I fix it?


... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera

My canon camera keeps saying lens error, restart camera. The lens is stuck in the out position. HELP!!!


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon PowerShot SX10 IS Digital Camera

Lens barrel is stuck in the out position on my Canon Powershot SD1100 IS. Error message reads: "Lens error, restart camera". To my knowledge the camera has not been dropped and the barrel seems to be properly aligned. Any suggestions would be greatly appreciated. Thanks


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot SD1100 IS Digital Camera

Canon powershot sd1100 1s lens is out of focus. This happened after there was a "lens error, restart camera" in which the lens was stuck. Once the lens finally went back in and was working properly the lens was then out of focus


... Canon PowerShot SD1100 IS Digital Camera

Hello I have a Canon digital elph sd600 and the lens won't retract all the way and it gives me a lens error message to restart the camera but the lens is stuck halfway - it won't extend fully and it won't completely retract. Any suggestions as to what I need to do to fix this? Thanks so much I appreciate it.


See http://www.fixya.com/support/r13011856-lens_error ... Canon PowerShot SD600 Digital Camera

Canon Powershot SD 600 keep getting "lens error, restart camera" and the lens is stuck.


Try these procedures. ... Canon PowerShot SD600 Digital Camera

Canon Power Shot A2000 IS lens is stuck in out position. I had to replace batteries. I replaced them and when I turn on, it says "Lens Error, Restart Camera" and it shuts offs automatically.


The lens has probably got something in the retraction mechanism that is stopping it retracting. This can be something as simple as sand or grit or as a result of a drop or knock. In most cases the camera will need to be stripped apart to remove the l ... Canon Powershot A2000 IS Digital Camera

I have a canon powershot tx1 and i just got a 'lens error, restart camera' message and my lens is stuck. i just bought it a month ago and haven't mistreated it at all. how can i fix it?


I have a canon powershot a470nd i just got a 'lens error, restart\015\012camera' message and my lens is stuck. i just bought it a month ago and\015\012haven't mistreated it at all. how can i fix it? ... Canon Digital Cameras

Canon PowerShot A580. Lens is stuck in an open position. I am receiving a Lens Error message. I try to restart the camera as directed but nothing happens.


Canon A580 ... Canon Digital Cameras

Canon powershot sd870 is wont shut the lens.. appears the error lens restart camera thing... it happened once but it fixed itself after not using it for a while but now it's back and worse, its pretty much stuck and something sounds loose inside if i shake it a bit... i dont know about the warranty but i think im no longer within that period... also i live in mexico so... if you send me to a service center in the us, not gonna work :S please help ):


I know you're not in the US but try www.camerasandparts.com I don't know if they'll offer you service from where you are but in the US, there the ones for service on the Canon Powershot models. That problem is $79 for everything, parts and labor an ... Canon PowerShot SD870 IS Digital Camera

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera


\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4139 seconds